MKP 1837
Vishay Roederstein
Metallized Polypropylene Film Capacitor
Related Document: IEC 60384-16
Dimensions in millimeters
L
Max.
W
Max.
Marking
FEATURES
Product is completely lead (Pb)-free
Product is RoHS-compliant
CAPACITANCE TOLERANCES
± 10% (K), ± 5% (J), ± 2.5% (H), ± 1% (F)
0.6
H
Max.
e3
RoHS
COMPLIANT
RATED VOLTAGES (U
R
)
160 VDC
6.0
- 1
±
0.4
5.0
±
0.4
Ø 0.5
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60HZ
100 VAC
TEST VOLTAGE (ELECTRODE/ELECTRODE)
1.6 x U
R
for 2 s
MAIN APPLICATIONS
Oscillator, timing and LC/RC filter circuits, high frequency
coupling/decoupling, sample and hold circuits.
INSULATION RESISTANCE
Measured at 100 VDC after one minute
100,000 MΩ minimum value
MARKING
Manufacturer's logo/type/C-value/rated voltage/tolerance/
date of manufacture
TEMPERATURE COEFFICIENT
- 250°C x 10
-6
/°C (typical value)
DIELECTRIC
Polypropylene film
MAXIMUM PULSE RISE TIME
dv/dt = 390 V/µs
If the maximum pulse voltage is less than the rated voltage,
higher dv/dt values can be permitted.
ELECTRODES
Vacuum deposited aluminum
DERATING FOR DC AND AC.CATEGORY VOLTAGE U
C
At + 85°C: U
C
= 1.0 U
R
At + 100°C: U
C
= 0.7 U
R
COATING
Flame retardant plastic case (UL-class 94 V-0), blue, epoxy
resin sealed
SELF INDUCTANCE
~ 6 nH measured with 2mm long leads
CONSTRUCTION
Extended metallized film (refer to general information)
PULL TEST ON LEADS
LEADS
Tinned wire
≥
30 N in direction of leads according to IEC 60068-2-21
DIELECTRIC ABSORPTION
0.05% (typical value) acc. to IEC 60384-1
IEC TEST CLASSIFICATION
55/100/56, according to IEC 60068
RELIABILITY
Operational life > 300,000 h
Failure rate < 5 FIT (40°C and 0.5 x U
R
)
For further details, please refer to the general information
available at www.vishay.com/doc?26033.
OPERATING TEMPERATURE RANGE
- 55°C to + 100°C
CAPACITANCE RANGE
0.01µF to 0.1µF
CAPACITANCE DRIFT
Up to + 40°C, < 0.5% for a period of two years
DISSIPATION FACTOR TAN
δ
MEASURED AT
1kHz
10kHz
100kHz
Maximum values
C
≤
0.1µF
0.4 x 10
-3
0.6 x 10
-3
4 x 10
-3
Document Number: 26017
Revision: 23-Jun-05
For technical questions contact; dc-film@vishay.com
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
