applications where PCB real estate is at a premium
and standard packaging for automated assembly
and low cost are critical. Typical applications include
infrastructure, portables, and peripheral devices
(PCMCIA cards) for wireless standards such as
GSM, AMPS, CDPD, RAM, and ARDIS. Available in
tape and reel.
The MAPDCC0009 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and
reliability.
1.
Pins 2, 6, and 7 must be DC and RF grounded.
Pin Configuration
Pin No.
Function
RF 1
RF IN
GND
RF 4
Pin No.
5
6
7
8
Function
RF 3
GND
GND
RF 2
Ordering Information
Part Number
MAPDCC0009
MAPDCC0009-TR
MAPDCC0009-TB
1
2
Package
Bulk Packaging
2000 piece reel
Sample Test Board
3
4
Note: Reference Application Note M513 for reel size
information.
1
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0009
Low Cost Four-Way GMIC SMT Power Divider
824 – 960 MHz
Electrical Specifications: T
A
= +25°C, Z
0
= 50
Parameter
Insertion Loss Above 6.0 dB
Isolation
VSWR Input
Output
Amplitude Balance
Phase Balance
Units
dB
dB
—
—
dB
°
Rev. V2
Min
—
20
—
—
—
—
Typ
0.8
24
1.4:1
1.25:1
0.3
3
Max
1.1
—
1.7:1
1.5:1
0.6
6
Absolute Maximum Ratings
2,3
Parameter
Input Power
4
Operating Temperature
Storage Temperature
2.
3.
4.
Absolute Maximum
1W CW
-40°C to +85°C
-65°C to +150°C
RF OUT
.000
2X °
.050
PLATED THRU
RF OUT
Recommended PCB Configuration
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
With internal load dissipation of 0.125 W maximum.
RF IN
.244
.030
TYP.
RF OUT
Handling Procedures
Please observe the following precautions to avoid
damage:
RF OUT
12X °
PLATED THRU
.016
.072
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0009
Low Cost Four-Way GMIC SMT Power Divider
824 – 960 MHz
Typical Performance Curves
Insertion Loss vs. Frequency
(Dashed lines show amplitude balance window)
VSWR vs. Frequency
Rev. V2
Isolation vs. Frequency
Phase Balance vs. Frequency
(Relative to RF1)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0009
Low Cost Four-Way GMIC SMT Power Divider
824 – 960 MHz
Lead-Free,
SOIC-8
†
Rev. V2
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAPDCC0009
Low Cost Four-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
www.macom.com
for additional data sheets and product information.
中国 北京—— Analog Devices, Inc. （纽约证券交易所代码 : ADI ），全球领先的高性能信号处理解决方案供应商，最新推出两款模拟输出驱动器—— AD5750 和 AD5751 ，能显著提高过程控制应用的效率和可靠性，包括那些在高恒流电压和高温条件下工作的过程控制应用。这两款器件基于 ADI 公司的 iCMOS ™工业工艺技术，输出驱动器的精度...[详细]
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
