MAX1132BEAP-T,MAX1132BEAP-T pdf中文资料,MAX1132BEAP-T引脚图,MAX1132BEAP-T电路-Datasheet-电子工程世界

Datasheet> 器件分类 > 模拟混合信号IC> 转换器> MAX1132BEAP-T

MAX1132BEAP-T: 产品描述Analog to Digital Converters - ADC 16-Bit ADC, 200ksps, 5V Single-Supply w/Ref, 14-Bit, 200ksps, 5V Single-Supply w/Ref std D; 产品类别模拟混合信号IC 转换器; 文件大小244KB，共19页; 制造商Maxim(美信半导体); 官网地址https://www.maximintegrated.com/en.html

下载文档详细参数选型对比全文预览

MAX1132BEAP-T在线购买

供应商	器件名称	价格	最低购买	库存
	MAX1132BEAP-T	-	-	点击查看	点击购买

MAX1132BEAP-T概述

Analog to Digital Converters - ADC 16-Bit ADC, 200ksps, 5V Single-Supply w/Ref, 14-Bit, 200ksps, 5V Single-Supply w/Ref std D

MAX1132BEAP-T规格参数

参数名称	属性值
是否无铅	含铅
是否Rohs认证	不符合
厂商名称	Maxim(美信半导体)
零件包装代码	SSOP
包装说明	5.30 MM, MO-150, SSOP-20
针数	20
Reach Compliance Code	not_compliant
ECCN代码	EAR99
最大模拟输入电压	12 V
最小模拟输入电压	-12 V
最长转换时间	240 µs
转换器类型	ADC, SUCCESSIVE APPROXIMATION
JESD-30 代码	R-PDSO-G20
JESD-609代码	e0
长度	7.2 mm
最大线性误差 (EL)	0.0038%
湿度敏感等级	1
模拟输入通道数量	1
位数	16
功能数量	1
端子数量	20
最高工作温度	85 °C
最低工作温度	-40 °C
输出位码	2\'S COMPLEMENT BINARY
输出格式	SERIAL
封装主体材料	PLASTIC/EPOXY
封装代码	SSOP
封装等效代码	SSOP20,.3
封装形状	RECTANGULAR
封装形式	SMALL OUTLINE, SHRINK PITCH
峰值回流温度（摄氏度）	240
电源	5 V
认证状态	Not Qualified
采样速率	0.2 MHz
采样并保持/跟踪并保持	TRACK
座面最大高度	1.99 mm
标称供电电压	5 V
表面贴装	YES
技术	BICMOS
温度等级	INDUSTRIAL
端子面层	TIN LEAD
端子形式	GULL WING
端子节距	0.65 mm
端子位置	DUAL
处于峰值回流温度下的最长时间	NOT SPECIFIED
宽度	5.29 mm

文档预览

下载PDF文档

全文
预览

19-2083; Rev 0; 8/01

KIT

ATION

EVALU

BLE

AVAILA

16-Bit ADC, 200ksps, 5V Single-Supply

with Reference

General Description

The MAX1132/MAX1133 are 200ksps, 16-bit ADCs.

These serially interfaced ADCs connect directly to

SPI™, QSPI™, and MICROWIRE™ devices without

external logic. They combine an input scaling network,

internal track/hold, clock, a +4.096V reference, and

three general-purpose digital output pins (for external

multiplexer or PGA control) in a 20-pin SSOP package.

The excellent dynamic performance (SINAD

≥

85dB),

high-speed (200ksps), and low power (7.5mA) of these

ADCs, make them ideal for applications such as indus-

trial process control, instrumentation, and medical

applications. The MAX1132 accepts input signals of 0

to +12V (unipolar) or ±12V (bipolar), while the

MAX1133 accepts input signals of 0 to +4.096V (unipo-

lar) or ±4.096V (bipolar). Operating from a single

+4.75V to +5.25V analog supply and a +4.75V to

+5.25V digital supply, power-down modes reduce

current consumption to 1mA at 10ksps and further

reduce supply current to less than 20µA at slower data

rates. A serial strobe output (SSTRB) allows direct con-

nection to the TMS320 family of digital signal proces-

sors. The MAX1132/MAX1133 user can select either the

internal clock, or an external serial-interface clock for

the ADC to perform analog-to-digital conversions.

The MAX1132/MAX1133 feature internal calibration cir-

cuitry to correct linearity and offset errors. On-demand

calibration allows the user to optimize performance.

Three user-programmable logic outputs are provided

for the control of an 8-channel mux or a PGA.

Features

♦

200ksps (Bipolar) and 150ksps (Unipolar)

Sampling ADC

♦

16-Bits, No Missing Codes

♦

1.5LSB INL Guaranteed

♦

85dB (min) SINAD

♦

+5V Single-Supply Operation

♦

Low-Power Operation, 7.5mA (Unipolar Mode)

♦

2.5µA Shutdown Mode

♦

Software-Configurable Unipolar and Bipolar Input

Ranges

0 to +12V and ±12V (MAX1132)

0 to +4.096V and ±4.096V (MAX1133)

Internal or External Reference

♦

Internal or External Clock

♦

SPI/QSPI/MICROWIRE-Compatible Serial Interface

♦

Three User-Programmable Logic Outputs

♦

Small 20-Pin SSOP Package

MAX1132/MAX1133

Ordering Information

PART

MAX1132ACAP*

TEMP. RANGE

0°C to +70°C

PIN-PACKAGE

20 SSOP

INL

(LSB)

±1.5

±2.5

Applications

Industrial Process Control

Industrial I/O Modules

Data-Acquisition Systems

Medical Instruments

Portable and Battery-Powered Equipment

MAX1132BCAP

Ordering Information continued at end of data sheet.

Pin Configuration

TOP VIEW

REF 1

REFADJ 2

AGND 3

DGND 5

SHDN

20 AIN

19 AGND

18 CREF

MAX1132

MAX1133

16 DIN

15 DV

14 DGND

13 SCLK

12 RST

11 DOUT

Functional Diagram appears at end of data sheet.

Typical Application Circuit appears at end of data sheet.

SPI and QSPI are trademarks of Motorola, Inc.

MICROWIRE is a trademark of National Semiconductor Corp.

P2 7

P1 8

P0 9

SSTRB 10

SSOP

________________________________________________________________

Maxim Integrated Products

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

MAX1132BEAP-T相似产品对比

	MAX1132BEAP-T	MAX1132BCAP	MAX1132BCAP-T	MAX1133BEAP-T	MAX1132BEAP-	MAX1133BEAP	CH1206124R1%BE2	MAX1133BCAP	MAX1133BEAP+T	MAX1132BCAP+T
描述	Analog to Digital Converters - ADC 16-Bit ADC, 200ksps, 5V Single-Supply w/Ref, 14-Bit, 200ksps, 5V Single-Supply w/Ref std D	Analog to Digital Converters - ADC 16-Bit ADC, 200ksps, 5V Single-Supply with Reference	Analog to Digital Converters - ADC 16-Bit ADC, 200ksps, 5V Single-Supply w/Ref, 14-Bit, 200ksps, 5V Single-Supply w/Ref std D	Analog to Digital Converters - ADC 16-Bit ADC, 200ksps, 5V Single-Supply w/Ref, 14-Bit, 200ksps, 5V Single-Supply w/Ref std D	Analog to Digital Converters - ADC 16-Bit 200ksps 5V Single-Supply w/Ref	Analog to Digital Converters - ADC 16-Bit ADC, 200ksps, 5V Single-Supply with Reference	Fixed Resistor, Thin Film, 0.33W, 124ohm, 75V, 1% +/-Tol, 100ppm/Cel, 1206,	Analog to Digital Converters - ADC 16-Bit 200ksps 5V Single-Supply w/Ref	Analog to Digital Converters - ADC 16-Bit 200ksps 5V Single-Supply w/Ref	Analog to Digital Converters - ADC 16-Bit 200ksps 5V Single-Supply w/Ref
是否无铅	含铅	含铅	含铅	含铅	-	含铅	-	含铅	不含铅	不含铅
是否Rohs认证	不符合	不符合	不符合	不符合	-	不符合	符合	不符合	符合	符合
厂商名称	Maxim(美信半导体)	Maxim(美信半导体)	Maxim(美信半导体)	Maxim(美信半导体)	-	Maxim(美信半导体)	-	Maxim(美信半导体)	Maxim(美信半导体)	Maxim(美信半导体)
零件包装代码	SSOP	SSOP	SSOP	SSOP	-	SSOP	-	SSOP	SSOP	SSOP
包装说明	5.30 MM, MO-150, SSOP-20	5.30 MM, MO-150, SSOP-20	5.30 MM, MO-150, SSOP-20	5.30 MM, MO-150, SSOP-20	-	5.30 MM, MO-150, SSOP-20	-	5.30 MM, MO-150, SSOP-20	SSOP, SSOP20,.3	SSOP, SSOP20,.3
针数	20	20	20	20	-	20	-	20	20	20
Reach Compliance Code	not_compliant	not_compliant	not_compliant	not_compliant	-	not_compliant	unknown	not_compliant	compliant	compliant
ECCN代码	EAR99	EAR99	EAR99	EAR99	-	EAR99	EAR99	EAR99	EAR99	EAR99
最大模拟输入电压	12 V	12 V	12 V	4.096 V	-	4.096 V	-	4.096 V	4.096 V	12 V
最小模拟输入电压	-12 V	-12 V	-12 V	-4.096 V	-	-4.096 V	-	-4.096 V	-4.096 V	-12 V
最长转换时间	240 µs	240 µs	240 µs	240 µs	-	240 µs	-	240 µs	240 µs	240 µs
转换器类型	ADC, SUCCESSIVE APPROXIMATION	ADC, SUCCESSIVE APPROXIMATION	ADC, SUCCESSIVE APPROXIMATION	ADC, SUCCESSIVE APPROXIMATION	-	ADC, SUCCESSIVE APPROXIMATION	-	ADC, SUCCESSIVE APPROXIMATION	ADC, SUCCESSIVE APPROXIMATION	ADC, SUCCESSIVE APPROXIMATION
JESD-30 代码	R-PDSO-G20	R-PDSO-G20	R-PDSO-G20	R-PDSO-G20	-	R-PDSO-G20	-	R-PDSO-G20	R-PDSO-G20	R-PDSO-G20
JESD-609代码	e0	e0	e0	e0	-	e0	-	e0	e3	e3
长度	7.2 mm	7.2 mm	7.2 mm	7.2 mm	-	7.2 mm	-	7.2 mm	7.2 mm	7.2 mm
最大线性误差 (EL)	0.0038%	0.0038%	0.0038%	0.0038%	-	0.0038%	-	0.0038%	0.0038%	0.0038%
湿度敏感等级	1	1	1	1	-	1	-	1	1	1
模拟输入通道数量	1	1	1	1	-	1	-	1	1	1
位数	16	16	16	16	-	16	-	16	16	16
功能数量	1	1	1	1	-	1	-	1	1	1
端子数量	20	20	20	20	-	20	2	20	20	20
最高工作温度	85 °C	70 °C	70 °C	85 °C	-	85 °C	155 °C	70 °C	85 °C	70 °C
输出位码	2\'S COMPLEMENT BINARY	2\'S COMPLEMENT BINARY	2\'S COMPLEMENT BINARY	2\'S COMPLEMENT BINARY	-	2\'S COMPLEMENT BINARY	-	2\'S COMPLEMENT BINARY	BINARY, 2\'S COMPLEMENT BINARY	BINARY, 2\'S COMPLEMENT BINARY
输出格式	SERIAL	SERIAL	SERIAL	SERIAL	-	SERIAL	-	SERIAL	SERIAL	SERIAL
封装主体材料	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	-	PLASTIC/EPOXY	-	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY
封装代码	SSOP	SSOP	SSOP	SSOP	-	SSOP	-	SSOP	SSOP	SSOP
封装等效代码	SSOP20,.3	SSOP20,.3	SSOP20,.3	SSOP20,.3	-	SSOP20,.3	-	SSOP20,.3	SSOP20,.3	SSOP20,.3
封装形状	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	-	RECTANGULAR	-	RECTANGULAR	RECTANGULAR	RECTANGULAR
封装形式	SMALL OUTLINE, SHRINK PITCH	SMALL OUTLINE, SHRINK PITCH	SMALL OUTLINE, SHRINK PITCH	SMALL OUTLINE, SHRINK PITCH	-	SMALL OUTLINE, SHRINK PITCH	SMT	SMALL OUTLINE, SHRINK PITCH	SMALL OUTLINE, SHRINK PITCH	SMALL OUTLINE, SHRINK PITCH
峰值回流温度（摄氏度）	240	240	245	245	-	240	-	240	260	260
电源	5 V	5 V	5 V	5 V	-	5 V	-	5 V	5 V	5 V
认证状态	Not Qualified	Not Qualified	Not Qualified	Not Qualified	-	Not Qualified	-	Not Qualified	Not Qualified	Not Qualified
采样速率	0.2 MHz	0.2 MHz	0.2 MHz	0.2 MHz	-	0.2 MHz	-	0.2 MHz	0.2 MHz	0.2 MHz
采样并保持/跟踪并保持	TRACK	TRACK	TRACK	TRACK	-	TRACK	-	TRACK	TRACK	TRACK
座面最大高度	1.99 mm	1.99 mm	1.99 mm	1.99 mm	-	1.99 mm	-	1.99 mm	1.99 mm	2 mm
标称供电电压	5 V	5 V	5 V	5 V	-	5 V	-	5 V	5 V	5 V
表面贴装	YES	YES	YES	YES	-	YES	-	YES	YES	YES
技术	BICMOS	BICMOS	BICMOS	BICMOS	-	BICMOS	THIN FILM	BICMOS	BICMOS	BICMOS
温度等级	INDUSTRIAL	COMMERCIAL	COMMERCIAL	INDUSTRIAL	-	INDUSTRIAL	-	COMMERCIAL	INDUSTRIAL	COMMERCIAL
端子面层	TIN LEAD	Tin/Lead (Sn85Pb15)	TIN LEAD	Tin/Lead (Sn85Pb15)	-	Tin/Lead (Sn85Pb15)	-	Tin/Lead (Sn85Pb15)	Matte Tin (Sn)	Matte Tin (Sn)
端子形式	GULL WING	GULL WING	GULL WING	GULL WING	-	GULL WING	-	GULL WING	GULL WING	GULL WING
端子节距	0.65 mm	0.65 mm	0.65 mm	0.65 mm	-	0.65 mm	-	0.65 mm	0.65 mm	0.65 mm
端子位置	DUAL	DUAL	DUAL	DUAL	-	DUAL	-	DUAL	DUAL	DUAL
处于峰值回流温度下的最长时间	NOT SPECIFIED	20	NOT SPECIFIED	NOT SPECIFIED	-	20	-	20	30	NOT SPECIFIED
宽度	5.29 mm	5.29 mm	5.29 mm	5.29 mm	-	5.29 mm	-	5.29 mm	5.29 mm	5.3 mm

MAX1132BEAP-T

MAX1132BEAP-T在线购买

MAX1132BEAP-T概述

MAX1132BEAP-T规格参数

文档预览

MAX1132BEAP-T相似产品对比

推荐资源