Configurable High Performance SMD TCXO/VCTCXO
ASGTX
OVERVIEW:
ASGTX
temperature compensated
Crystal
Oscillators are designed to accommodate a broad breadth of
Precision
TCXO
requirements, without
NRE
and extended lead-times. This oscillator series is designed and
manufactured
by
Abracon Corporation and is available to order from 1pc to high volume production
quantities.
ESD Sensitive
Pb
RoHS/RoHS II Compliant
9.0 x 7.0 x 2.24 mm
•
1-5 day quick-turn availability of a TCXO/VCTCXO with LVCMOS output, Any frequency
between 10MHz & 250MHz
For example, if a reference oscillator requirement calls out 49.7521MHz; ±1.00
ppm
TCXO/VCTCXO
with
LVCMOS
output,
ASGTX
can be configured and shipped within 1-5 days and in most cases,
same day if order is received before noon. Customers with low-to-mid annual volume requirements
find it difficult to procure custom frequency TCXO/VCTXCO’s without costly
NRE
charges and/or
long lead-times (>
12
weeks).
•
1-5 day quick turn availability of a TCXO/VCTXCO requiring LVDS or LVPECL Differential
output, Any frequency between 10MHz to 1.50GHz
ASGTX
is available with either
LVDS or LVPECL
output, from
10MHz to 1.50GHz;
at any desired
frequency, such as 149.875MHz, 1.00GHz, 1.5GHz, etc. with as tight as
±1.00 ppm
stability over
temperature. No other solution in the marketplace currently offers such capability, especially in a small
form-factor of 9.0x7.0x2.24 mm.
ASGTX
is suitable for a wide variety of precision timing applications where TCXO/VCTXO’s are typically
employed. In addition, for high
frequency
LO requirements, traditionally customers have relied on SAW
based oscillators. Such devices are only available at a few fixed frequencies, such as 915MHz, 1.0GHz,
etc. They are typically in 9x14mm or bigger packages and vary as much as ±100 ppm over temperature.
Although
ASGTX
series will be slightly less favorable in phase noise performance compared to
SAW
based
oscillators, it offers the following key advantages:
o ±1.00
ppm
stability over -30ºC to
+70ºC
&
±2.00 ppm stability over -40ºC to +85ºC
o
Any carrier frequency
between 10MHz & 1.50GHz
o LVCMOS Output (10MHz to 250MHz)
or
LVDS / LVPECL Output (10MHz to 1.50GHz)
o
Small
form-factor of 9.0x7.0x2.24 mm
o No NRE or
lead-time
• 10MHz to 1.50GHz, any Carrier Frequency in differential mode
(LVDS or LVPECL)
• 10MHz to 250MHz, any Carrier Frequency in LVCMOS mode
• -40ºC to +85ºC operating temperature range
• ±1.0ppm stability over -30ºC to +70ºC and ±2.0ppm stability over
-40ºC to +85ºC
• Minimum guaranteed pull ability of ± 10ppm in VCTCXO mode
• Good Phase Noise, excellent Harmonics and Spurious content
• Guaranteed rms jitter of 1.80ps maximum @ 1.50GHz carrier (LVDS mode)
• Immediate availability, 5-day maximum lead-time for small quantities
FEATURES:
• 40G & 100G Ethernet
• WiMax,
• LTE, BTS
• CATV, LAN, LMDS
• Point-to-Point communication networks
APPLICATIONS:
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
2 Faraday, Suit#B, Irvine, California 92618
Revised: 10.16.14
tel:
949-546-8000
|
fax:949-546-8001
Visit
www.abracon.com
for Terms & Conditions of Sale
Configurable High Performance SMD TCXO/VCTCXO
ASGTX
KEY ELECTRICAL SPECIFICATIONS:
Parameters
LVCMOS
Frequency:
LVDS
LVPECL
Operating Temperature:
Storage Te mperature:
Frequency Stability:
Minimum
10
10
10
-40
-40
Typical
Maximum
250
1500
1500
+85
+85
Units
MHz
°C
°C
Notes
Pb
RoHS/RoHS II Compliant
9.0 x 7.0 x 2.24 mm
≤
±1.00
-1.50
+1.50
ppm
1 hour after reflow
Initial Set Tolerance
Stability over -30°C to +70°C
Option “1”
-1.00
+1.00
operating
ppm
Option “2”
-40°C to +85°C **
-2.00
+2.00
temperature*
Aging @ 25ºC after one year
-1.00
+1.00
ppm
Supply Voltage (Vdd):
3.135
3.300
3.465
V
Startup Time:
3
ms
Control Voltage***:
0
Vdd
V
In VCTCXO Mode
Frequency Pull:
±10
ppm
Phase jitter RMS
[
tjit( )
] ****
<1.00
1.80
ps
Frequency dependent
(12kHz to 20MHz)
Notes
*
Relative to measured frequency post reflow
**
Please contact Abracon for ±1.00 ppm frequency stability over -40°C to +85°C
***
Center Control Voltage value is either 1.28V ±0.20V or, 1.55V ±0.20V for the device to be with-in ±1.50 ppm of
final frequency, 1-hour post reflow
**** 1.8ps max is guaranteed for LVCMOS and LVDS output modes. For LVPECL mode at carrier frequency
greater than 1.289GHz, the maximum RMS jitter is 3.0ps
Key Electrical Specifications – LVCMOS
Parameters
Supply Current (I
dd
):
Output Load:
Output Logic Level:
Rise Time (Tr):
Fall Time (Tf):
Duty Cycle:
Minimum
V
OH
V
OL
0.9*V
dd
Typical
Maximum
45
15
0.1*V
dd
1000
1 0 00
55
Units
Notes
mA Frequency dependent
pF
V
V
ps
ps
%
@ 1/ 2V d d
45
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
2 Faraday, Suit#B, Irvine, California 92618
Revised: 10.16.14
tel:949-546-8000
|
fax:949-546-8001
Visit
www.abracon.com
for Terms & Conditions of Sale
Configurable High Performance SMD TCXO/VCTCXO
ASGTX
Key Electrical Specifications – LVPECL
Parameters
Supply Current (I
dd
)
Output Logic Level
Rise Time (Tr):
Fall Time (Tf):
Differential Duty Cycle:
V
OH
V
OL
V
dd
-1.03
V
dd
-1.85
45
Minimum
Typical
Maximum
60
V
dd
-0.60
V
dd
-1.60
350
350
55
Units
mA
V
V
ps
ps
%
Notes
With typical LVPECL
output termination
Pb
RoHS/RoHS II Compliant
9.0 x 7.0 x 2.24 mm
DODC
LVPECL
Key Electrical Specifications – LVDS
Parameters
Supply Current (I
dd
)
Differential Output Voltage (V
OD
)
V
OD
Magnitude Change (∆V
OD
)
Offset Voltage (V
OS
)
V
OS
Magnitude Change (∆V
OS
)
Rise Time (Tr):
Fall Time (Tf):
Differential Duty Cycle:
175
350
1.25
Minimum
Typical
Maximum
40
50
50
350
450
55
Units
mA
mV
mV
V
mV
ps
ps
%
Notes
With typical LVDS
output termination
45
ODC
LVDS
OPTIONS & PART IDENTIFICATION:
ASGTX-
-
MHz -
-
Output Type
C = LVCMOS
P = LVPECL
D = LVDS
Frequency in MHz
Please specify the
Frequency in MHz
e.g. 100.000 MHz
Freq. Stability
1 = ±1ppm over -30 to +70°C
2 = ±2ppm over -40 to +85°C
Packaging
Blank = Bulk (Qty < 250pcs)
T = 1000pcs/Reel
T2 = 250pcs/Reel
C = LVCMOS
P = LVPECL
D = LVDS
Any Carrier Frequency between 10MHz minimum to 250MHz maximum
Any Carrier Frequency between 10MHz minimum to 1.50GHz maximum
Any Carrier Frequency between 10MHz minimum to 1.50GHz maximum
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
2 Faraday, Suit#B, Irvine, California 92618
Revised: 10.16.14
tel:949-546-8000
|
fax:949-546-8001
Visit
www.abracon.com
for Terms & Conditions of Sale
Configurable High Performance SMD TCXO/VCTCXO
ASGTX
Pb
RoHS/RoHS II Compliant
9.0 x 7.0 x 2.24 mm
|
| |
TYPICAL PHASE NOISE & JITTER CHARACTERISTICS
With LVCMOS Output; 10MHz Carrier
With LVDS Output; 10MHz Carrier
With LVCMOS Output; 25MHz Carrier
With LVDS Output; 25MHz Carrier
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
2 Faraday, Suit#B, Irvine, California 92618
Revised: 10.16.14
tel:949-546-8000
|
fax:949-546-8001
Visit
www.abracon.com
for Terms & Conditions of Sale
Configurable High Performance SMD TCXO/VCTCXO
ASGTX
Pb
RoHS/RoHS II Compliant
9.0 x 7.0 x 2.24 mm
|
| |
TYPICAL PHASE NOISE & JITTER CHARACTERISTICS
With LVCMOS Output; 50MHz Carrier
With LVDS Output; 50MHz Carrier
With LVCMOS Output; 120MHz Carrier
With LVPECL Output; 500MHz Carrier
ABRACON IS
ISO9001:2008
CE RTIFIED
CE RTIFIED
2 Faraday, Suit#B, Irvine, California 92618
Revised: 10.16.14
tel:949-546-8000
|
fax:949-546-8001
Visit
www.abracon.com
for Terms & Conditions of Sale