Gate Drivers DBLE CH HI-SIDE DRVR W/ANALOG CRRNT SNSE
| 参数名称 | 属性值 |
| Brand Name | STMicroelectronics |
| 是否Rohs认证 | 符合 |
| 零件包装代码 | SSOP |
| 包装说明 | HLSSOP, SOP12,.25,32 |
| 针数 | 12 |
| Reach Compliance Code | not_compliant |
| ECCN代码 | EAR99 |
| Factory Lead Time | 12 weeks |
| 内置保护 | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| 驱动器位数 | 2 |
| 接口集成电路类型 | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| JESD-30 代码 | R-PDSO-G12 |
| JESD-609代码 | e3 |
| 长度 | 4.9 mm |
| 湿度敏感等级 | 3 |
| 功能数量 | 1 |
| 端子数量 | 12 |
| 输出电流流向 | SOURCE |
| 最大输出电流 | 2 A |
| 封装主体材料 | PLASTIC/EPOXY |
| 封装代码 | HLSSOP |
| 封装等效代码 | SOP12,.25,32 |
| 封装形状 | RECTANGULAR |
| 封装形式 | SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH |
| 峰值回流温度（摄氏度） | 260 |
| 电源 | 8/28 V |
| 认证状态 | Not Qualified |
| 座面最大高度 | 1.62 mm |
| 最大供电电压 | 28 V |
| 最小供电电压 | 4.5 V |
| 标称供电电压 | 13 V |
| 表面贴装 | YES |
| 端子面层 | Matte Tin (Sn) - annealed |
| 端子形式 | GULL WING |
| 端子节距 | 0.8 mm |
| 端子位置 | DUAL |
| 处于峰值回流温度下的最长时间 | 30 |
| 断开时间 | 45 µs |
| 接通时间 | 20 µs |
| 宽度 | 3.9 mm |
| Base Number Matches | 1 |
| VND5E050MJ-E | VND5E050MK-E | VND5E050MKTR-E | |
|---|---|---|---|
| 描述 | Gate Drivers DBLE CH HI-SIDE DRVR W/ANALOG CRRNT SNSE | Gate Drivers DBLE CH HI-SIDE DRVR W/ANALOG CRRNT SNSE | Gate Drivers DBLE CH HI-SIDE DRVR W/ANALOG CRRNT SNSE |
| Brand Name | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| 是否Rohs认证 | 符合 | 符合 | 符合 |
| 零件包装代码 | SSOP | SSOP | SSOP |
| 包装说明 | HLSSOP, SOP12,.25,32 | ROHS COMPLIANT, SSOP-24 | ROHS COMPLIANT, SSOP-24 |
| 针数 | 12 | 24 | 24 |
| Reach Compliance Code | not_compliant | not_compliant | not_compliant |
| ECCN代码 | EAR99 | EAR99 | EAR99 |
| Factory Lead Time | 12 weeks | 12 weeks | 12 weeks |
| 内置保护 | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| 驱动器位数 | 2 | 2 | 2 |
| 接口集成电路类型 | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| JESD-30 代码 | R-PDSO-G12 | R-PDSO-G24 | R-PDSO-G24 |
| JESD-609代码 | e3 | e3 | e3 |
| 长度 | 4.9 mm | 10.3 mm | 10.3 mm |
| 湿度敏感等级 | 3 | 3 | 3 |
| 功能数量 | 1 | 1 | 1 |
| 端子数量 | 12 | 24 | 24 |
| 输出电流流向 | SOURCE | SOURCE | SOURCE |
| 最大输出电流 | 2 A | 2 A | 2 A |
| 封装主体材料 | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY |
| 封装代码 | HLSSOP | HSSOP | HSSOP |
| 封装等效代码 | SOP12,.25,32 | SOP24,.4,32 | SOP24,.4,32 |
| 封装形状 | RECTANGULAR | RECTANGULAR | RECTANGULAR |
| 封装形式 | SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH | SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH | SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH |
| 峰值回流温度（摄氏度） | 260 | 260 | 260 |
| 电源 | 8/28 V | 8/28 V | 8/28 V |
| 认证状态 | Not Qualified | Not Qualified | Not Qualified |
| 座面最大高度 | 1.62 mm | 2.47 mm | 2.47 mm |
| 最大供电电压 | 28 V | 28 V | 28 V |
| 最小供电电压 | 4.5 V | 4.5 V | 4.5 V |
| 标称供电电压 | 13 V | 13 V | 13 V |
| 表面贴装 | YES | YES | YES |
| 端子面层 | Matte Tin (Sn) - annealed | Matte Tin (Sn) - annealed | Matte Tin (Sn) - annealed |
| 端子形式 | GULL WING | GULL WING | GULL WING |
| 端子节距 | 0.8 mm | 0.8 mm | 0.8 mm |
| 端子位置 | DUAL | DUAL | DUAL |
| 处于峰值回流温度下的最长时间 | 30 | 30 | 30 |
| 断开时间 | 45 µs | 45 µs | 45 µs |
| 接通时间 | 20 µs | 20 µs | 20 µs |
| 宽度 | 3.9 mm | 7.5 mm | 7.5 mm |
| Base Number Matches | 1 | 1 | 1 |
嵌入式系统
嵌入式系统
单片机
嵌入式系统
聊聊、笑笑、闹闹
聊聊、笑笑、闹闹
电子工程世界版权所有
京B2-20211791
京ICP备10001474号-1
电信业务审批[2006]字第258号函
京公网安备 11010802033920号
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
