Plugmold
®
Systems
Steel, Aluminum, and Nonmetallic Plugmold
Raceway and Multioutlet Assemblies
T
he selection of steel, aluminum, and nonmetallic
provides a versatile solution for many applications.
Plugmold sections offer single or alternating circuits,
standard or isolated ground receptacles, and Snapicoil
®
harnesses of prewired receptacles or cord ended units.
Steel Plugmold comes in an ivory ScuffCoat
™
or gray
enamel finish. The ScuffCoat finish is scratch resistant and
protects against nicks and chips while preventing color from
fading.
Aluminum Plugmold offers an attractive choice
for hospital and commercial labs. The finish offers high-tech
aesthetics and corrosion resistance.
Nonmetallic Plugmold has a textured ivory finish with
duplex receptacles. This series offers a field serviceable
surge module that protects the entire Plugmold strip and
makes on-site changes easy.
Plugmold Systems come in a variety of finishes and configurations.
Features & Benefits
■
Steel, aluminum, or nonmetallic material.
Variety provides
choice for the application.
■
Many finishes.
Ivory ScuffCoat finish or gray surface for steel,
aluminum satin anodized, and ivory nonmetallic textured finish.
■
Compact, low profile appearance.
Requires minimal space.
■
Full range of fittings.
Provides a complete wiring solution.
■
Single, alternating circuit, and isolated ground receptacles
available.
Meets virtually any job requirement.
■
Variety of lengths.
Ideal for different spaces.
■
Choose receptacle spacing.
Suits many applications.
■
Snapicoil harnesses with different lengths and receptacle
spacing.
Offers a solution for many electrical requirements.
■
Duplex receptacle.
Aesthetically pleasing, functional 20A
duplex for the 24S (2400) Series.
■
Single- and dual-gang boxes available.
Wire devices into
the raceway system.
■
Field replaceable surge module.
Replaces the module, not
a receptacle (NM2000 Series only).
■
Customization available.
All products can be modified to
accommodate virtually any application.
■
2400 Backfeed.
Fitting helps installation over an existing
wall box.
■
Datacom connectivity options.
Accepts industry standard
and proprietary devices from a wide range of manufacturers
to provide a seamless and aesthetically pleasing interface for
voice, data, audio, and video applications at the point-of-use.
■
UL and cUL Listed.
Safety and reliability in the applications.
■
cUL Listed 24S (2400) Series Plugmold.
This 20A
version is cUL Listed.
Plugmold Systems shown in typical applications.
ED1025R7 – Updated February 2005 – For latest specs visit www.wiremold.com
V/G 2000 Series
Catalog No./Item
Description/Specifications
Base and Cover
Covers seam
between sections of 5400C.
ITEM
CAT NO.
Base
V/G 2000B-5*
Cover
V/G 2000C*
Base & Cover V/G 2000BC*
LENGTH
5'
[1.5m]
5'
[1.5m]
5'
[1.5m]
MATERIAL
.040 Steel
.025 Steel
.025 Steel
Catalog No./Item
2009
1 7/32"
[31mm]
Description/Specifications
Ground Clamp
– For connection
of equipment grounding conductor
to provide additional ground
to raceway. Use with
V/G2000 Series.
How 2009 is used.
V2003
2003
2"
[51mm]
Supporting Clip
– For temporary
support, while positioning lengths
of raceway base. Use with V/G
2000 Series. V2003 has ivory
finish, 2003 has plated finish.
V2010B*
G2010B*
Blank End Fitting
– For closing
the open end of raceway.
Use with V/G 2000 Series.
3/4"
[19.1mm]
V2051
W30
1 5/16"
[33mm]
Pressure-Type Wire Connector
–
For common connection of two,
three, or four No. 12 or No.14 solid
copper conductors. Not for
connection of equipment grounding
conductor. 300V maximum; 20A
60° C maximum. Not for use with
aluminum conductors.
Wire Clip
– Holds conductors
in place in raceway.
Plugmold 2000
extended from wall
outlet using 2051H.
Flush Plate Adapter
– For
feeding 2000 from an existing
wall outlet. Equipped with 1/2"
[12.7mm] threaded stud, toothed
lockwasher for grounding, and
conduit bushing.
4 1/2"
[114mm]
2000WC
2400WC
AL2000WC
AL2400WC
NM2000WC
2051H fastened to
horizontally mounted
wall box.
2051H fastened to
vertically mounted
wall box.
V2011*
G2011*
Coupling
– For joining lengths
of 2000 Series Raceway Base.
at
any point
2"
[51mm]
2001
2 1/2"
[64mm]
Ea. Leg
90º Flat Elbow
– For right
angle turns on same surface.
Cover stop permits neat
butting of 2000C Cover.
Two couplings furnished.
desired. Base come together.
Cover Clip
– For covering
joint where lengths of cover
or base adjoin. Use with
V/G 2000 Series.
2017TC
1 1/2"
[38mm]
Internal Corner Coupling
–
Furnished with one fiber bushing.
2017TC
2017TC used as
a corner coupling.
2017TC used as a
corner coupling and a
straight-through fitting.
V2006*
G2006*
3/4"
[19.1mm]
1 1/2"
[38mm]
2000B
2017TC
V2010A3*
G2010A3*
2 7/64"
[53mm]
1 29/32"
[47mm]
2 11/16"
[67mm]
Entrance End
– Offers larger
capacity than V2010A2. 1/2"
trade size KOs on end, each
side and bottom. 3/4" trade
size KOs on bottom and rear.
Includes ground screw. Use
with V/G 2000 Series.
2000B
V2018C*
G2018C*
3 22/64"
[94mm]
External Elbow
– To continue
raceway runs around outside
corner. Fills the gap when
external corner is made by
notching and bending the
2000 Base.
1 7/8"
[48mm]
Cover gap filler snapped
into place in 2018C.
V2010A2*
G2010A2*
1 9/32"
[58mm]
1 1/2"
[38mm]
2 1/8"
[54mm]
3"
[76mm]
Entrance End
– For connecting
V2000 with 1/2" conduit and
armored cable connectors.
1/2" trade size KOs on end,
each side and bottom.
Includes ground screw. Use
with V/G 2000 Series.
V2015*
G2015*
6"
[152mm]
Tee
– For branches at right
angles. Couplings furnished.
1 1/2"
[38mm]
4"
[102mm]
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish.
2
V/G 2000 Series
Catalog No./Item
V2048
G2048
Description/Specifications
Single Gang Device Box
–
Cover has twistouts for 2000,
V500, and V700 Raceway.
Base has 1/2" trade KO and
rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
(continued)
Catalog No./Item
V2089E
Description/Specifications
End Reducing Connector
–
For connecting V2000 with
V500 Raceway through end
of V2000.
3/4"
[19.1mm]
4 5/8"
[117mm]
2 7/8"
[73mm]
1 3/4"
[44mm]
rectangular KO for extension to
wall box. Base has #10 threaded
V2048-2
4 3/4"
[121mm]
4 3/4"
[121mm]
1 3/4"
[44mm]
Two-Gang Device Box
– Cover
has G2048-2 Twistouts for 2000,
V500, and V700 Raceway.
Base has 1/2" trade KO and
rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
620
2000 Raceway Base and
Cover Cutter
– Portable
cutter for 2000 Cover and
Base. Tool steel construction
for clean and easy square
cuts every time. Total
manual operation.
V2089
3 1/4"
[83mm]
Side Reducing Connector
–
For connecting V2000 with V500
Raceway through side of V2000.
orange receptacles.
Couplings furnished.
6"
[152mm]
620BCK
Replacement Blade Kit
–
Replacement blades and
die set for 620 Cutter.
* Use “V” prefix for Ivory finish and “G” prefix for Gray finish.
trade size
V2400 Series
Catalog No./Item
Description/Specifications
Base and Cover
Covers seam
between sections of 5400C.
ITEM
Base
Cover
Base & Cover
CAT NO.
V2400B
V2400C
V2400BC
2"
[51mm]
Catalog No./Item
2409
Description/Specifications
Ground Clamp
– No. 10
ground screw provided.
Use with V2400 Series.
1/2"
[12.7mm]
LENGTH
5'
[1.5m]
5'
[1.5m]
5'
[1.5m]
MATERIAL
.040 Steel
.040 Steel
.040 Steel
V2410A
2401
Coupling
– For joining
lengths of raceway. Use
with V2400 Series.
2"
[51mm]
1 5/8"
[41mm]
Entrance End
– For connecting
V2400 with 1/2" trade size conduit
and armored cable. Use with
V2400 Series.
1 3/16"
[46mm]
2400WC
2400WC
AL2000WC
AL2400WC
NM2000WC
1"
[25mm]
Wire Clip
– Holds conductors
in place in raceway.
V2410B
1 3/16"
[30mm]
Blank End
– For closing open
end of V2400 Series.
V2410C
V2406
Cover Clip
– For covering
joint where lengths of cover
or base adjoin. Use with
V2400 Series (nonmetallic).
2 11/16" 1 7/8"
[68mm] [48mm]
2 1/8"
[54mm]
Entrance End Fitting
– Has 1/2"
and 3/4" trade size KOs on end
and bottom. Additional 1/2" trade
size KO on sides.
1 1/2"
[38mm]
3
V2400 Series
Catalog No./Item
V2411
15/16"
[23.8mm]
2 1/16"
[52mm]
3 7/8"
[98mm]
(continued)
Description/Specifications
90º Flat Elbow
– For right angle
turns on the same surface
(nonmetallic cover).
Catalog No./Item
V2489
Description/Specifications
Side Reducing Connector
–
For connecting V2400 with
V500 Raceway.
V2444
V2444-2
Internal Elbow
– For
making internal corners
(nonmetallic cover).
4 3/4"
[121mm]
4 3/4"
[121mm]
2 3/4"
[70mm]
V2417
1 5/8"
[41mm]
V2417M
1 3/4"
[45mm]
Internal Elbow
– For
making internal 90° corners.
All steel construction.
1 29/32"
[49mm]
Extra Deep Device Box
–
Base has rectangular knockout
to enable extension from existing
single-gang flush wall box and
1/2" and 1" concentric KOs.
V2444 Cover has two twistouts
for 500 and 700, and two
twistouts for 2400. V2444-2
Cover has four 2400
Series twistouts.
D
1 3/4" [44mm]
1 3/4" [44mm]
GANG #
1
2
CAT NO.
V2444
V2444-2
L
4 5/8" [117mm]
4 3/4" [121mm]
W
2 7/8" [73mm]
4 3/4" [121mm]
V2418
1 5/8"
[41mm]
External Elbow
– For
covering outside corners
(nonmetallic cover).
624
2400 and 2400BD Raceway
& Cover Cutter
– Portable
cutter for 2400B and 2400BD
Raceway and Cover. Tool
steel construction for clean
and easy square cuts.
Total manual operation.
V2451H
4 1/2"
[114mm]
Back Feed Fitting
– For feeding
V2400 Raceway from an existing
outlet box. Equipped with 1/2"
trade size male bushing and
locknut washer for grounding.
624BCK
Replacement Blade Kit
–
Replacement blades and
die set for 624 Cutter.
4 1/2"
[114mm]
V2448
V2448-2
L
W
D
Device Box
– Cover
has one twistout for 2400 on
each side and ends. Base has
1/2" trade KO and rectangular
KO for extension to wall box.
Base has #10 threaded hole
for ground connection.
W
2 7/8" [73mm]
4 3/4" [121mm]
D
1 3/4" [44mm]
1 3/4" [44mm]
GANG #
1
2
CAT NO.
V2448
V2448-2
L
4 5/8" [117mm]
4 3/4" [121mm]
AL Series
Catalog No./Item
Description/Specifications
Base and Cover
Covers sea
between sections of 5400C.
ITEM
Base
Cover
Base
Base
Cover
Base
CAT NO.
AL2000B-5
AL2000C-5
AL2000B-10
AL2400B-5
AL2400C
AL2400B-10
LENGTH
5'
5'
10'
5'
5'
10'
[1.5m]
[1.5m]
[3.m]
[1.5m]
[1.5m]
[3.m]
MATERIAL
.060 Aluminum
.060 Aluminum
.060 Aluminum
.060 Aluminum
.060 Aluminum
.060 Aluminum
1 7/16"
[37mm]
Catalog No./Item
AL2003
Description/Specifications
Supporting Clip
– Mount to
surface with No. 8 flathead
screws. Use with AL2000 Series.
W30
Pressure-Type Wire Connector
–
For common connection of two,
three, or four No. 12 or No.14 solid
copper conductors. Not for
connection of equipment grounding
conductor. 300V maximum; 20A
60° C maximum. Not for use with
aluminum conductors.
4
AL Series
Catalog No./Item
AL2000WC
AL2400WC
Description/Specification
Wire Clip
– Holds conductors
in place in raceway (nonmetallic).
(Continued)
Catalog No./Item
AL2011
AL2411
A
B
Description/Specifications
90º Flat Elbow
– For right
angle turn on same surface.
Comes with two couplings.
AL2001
AL2401
W
Coupling
– For joining lengths
of raceway. Use with AL2000
and AL2400 Series.
CAT NO.
L
C
CAT NO.
AL2011
AL2411
A
3" [76mm]
4" [102mm]
B
3" [76mm]
4" [102mm]
C
1 9/16" [40mm]
2"
[51mm]
L
W
AL2001
AL2401
1 5/8"[41mm] 1 1/2" [38mm]
3"
[76mm] 1 3/4" [44mm]
AL2015
AL2415
A
B
Tee
– For branch connection of
two runs of AL2000 Raceway.
Three couplings furnished.
AL2006
AL2406
1"
[25mm]
Cover Clip
– For covering
joint where lengths of cover
or base adjoin. Use with
AL2000 and AL2400 Series.
C
CAT NO.
AL2015
AL2415
A
1 7/16" [37mm]
4"
[102mm]
B
4" [102mm]
6" [152mm]
C
1 9/16" [40mm]
2"
[51mm]
AL2009
#8 Ground Stud
W/Cup Washer
1 1/2"
[38mm]
Ground Clamp
– Use with
AL2000 Series.
AL2416
6"
[152mm]
6"
[152mm]
Cross
– For cross connection
of two runs of AL2400 Raceway.
Four couplings furnished.
AL2409
3"
[76mm]
Ground Clamp
– Use with
AL2400 Series.For
connection
#8 Ground Stud
W/Cup Washer
2"
[51mm]
1 3/4"
[44mm]
AL2017
AL2417
1 3/8"
[35mm]
AL2010A
End Fitting
– With 1/2"
hub adapter. Use
with AL2000 Series.
1"
[25mm]
Internal Elbow
– For bending
around internal corners. Two
couplings furnished.
A
A
CAT NO.
AL2017
AL2417
3"
4"
A
[76mm]
[102mm]
AL2018
AL2418
B
B
AL2410B2
2"
[51mm]
End Fitting
– With 1/2"
plastic KO. Use
with AL2400 Series.
1 1/4"
[32mm]
External Elbow
– For making
90º external corners. Two
couplings furnished.
A
CAT NO.
AL2018
AL2418
A
1 7/8" [48mm]
3"
[76mm]
B
3" [76mm]
5" [127mm]
AL2038
4 13/16"
[122mm]
1 3/8"
[35mm]
AL2010B
1 3/8"
[35mm]
Blank End
– Use with
AL2000 Series.
1"
[25mm]
Round Fixture Box (Solid Base)
–
Designed for use in hanging
fixtures. Cover takes any device
with mounting screw centers of
2 3/4", 3 1/2", and 4 1/16"
[70mm, 89mm, and [103mm].
Base has concentric 1/2"
and 3/4" KO.
In-line Single Pole Switch
–
Single pole 120V switch. Two
couplings furnished.
AL2410B
2"
[51mm]
Blank End
– Use with
AL2400 Series.
1 1/4"
[32mm]
AL2040A
6"
[152mm]
AL2051
AL2451
4 1/2"
[114mm]
Box Adapter
– For feeding
raceway from an existing
wall outlet.
4 1/2"
[114mm]
AL2043
In-line Receptacle
– Two 15A,
120V U-ground factory wired
receptacles. Couplings furnished.
6"
[152mm]
5
Linux开发
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
