T-1
3
/
4
(5 mm), T-1 (3 mm)
Blue LED Lamps
Technical Data
Features
• Popular T-1
3
/
4
and T-1
Diameter Packages
• General Purpose Leads
• Reliable and Rugged
• Available on Tape and Reel
• Binned for Color and
Intensity
HLMP-DB25-B00xx
HLMP-KB45-A00xx
Description
These blue LEDs are designed in
industry standard T-1 and T-1
3
/
4
package with clear and non
diffused optics. They are also
available in tape and reel, and
ammo-pack option for ease of
handling and use.
These blue lamps are ideal for
use as indicators and for general
purpose lighting. Blue lamps
offer color differentiation as blue
is attractive and not widely
available.
5.08 (0.200)
4.57 (0.180)
Applications
• Status Indicators
• Small Message Panel
• Running and Decorative
Lights for Commercial Use
Package Dimensions
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
9.19 (0.352)
8.43 (0.332)
6.35 (0.250)
5.58 (0.220)
4.70 (0.185)
4.19 (0.165)
0.89 (0.035)
0.64 (0.025)
23.0
(0.90) MIN.
0.45 (0.018)
SQUARE NOMINAL
1.02 (0.040)
NOM.
23.0
MIN.
(0.90)
CATHODE
0.45 (0.018)
SQUARE NOM.
1.27 (0.050)
NOM.
6.10 (0.240)
5.59 (0.220)
CATHODE
2.54 (0.100)
NOM.
1.27 (0.050)
NOM.
2.54 (0.100) NOM.
HLMP-KB45
HLMP-DB25
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS.
CAUTION:
Devices are Class II ESD sensitive. Please observe appropriate precautions during handling
and processing. Refer to Application Note AN-1142 for additional details.
2
Selection Guide
Luminous Intensity Iv (mcd)
Part Number
HLMP-KB45-A00xx
HLMP-DB25-B00xx
Package
T-1
T-1 3/4
Viewing Angle
40
25
Min.
30
40
Max.
–
–
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Option
00: Bulk
02: Tape & Reel, Straight Leads
DD: Ammo Pack
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Viewing Angle
25: 25 degrees
45: 40 degrees
Color Options
B: Blue 462 nm
Package Options
D: T-1 3/4 (5 mm)
K: T-1 (3 mm)
Absolute Maximum Ratings at T
A
= 25˚C
Parameter
Peak Forward Current
DC Current
[1]
Reverse Voltage (I
R
= 100
µA)
Transient Forward Current
[2]
(10
µsec
Pulse)
LED Junction Temperature
Operating Temperature
Storage Temperature
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
Blue
70
30
5
350
115
–20 to +80
–30 to +100
Units
mA
mA
V
mA
˚C
˚C
˚C
260°C for 5 seconds
Notes:
1. Derate linearly from 50
°C
as shown in Figure 6.
2. The transient peak current is the maximum non-recurring peak current that can be
applied to the device without damaging the LED die and wirebond. It is not
recommended that this device be operated at peak currents above the Absolute
Maximum Peak Forward Current.
3
Optical Characteristics at T
A
= 25˚C
Luminous
Intensity
I
V
(mcd)
@ I
F
= 20 mA
Min.
Typ.
40
30
100
45
Color,
Dominant
Wavelength
λ
d[1]
(nm)
Typ.
462
462
Peak
Wavelength
λ
PEAK
(nm)
Typ.
426
426
Viewing
Angle
2θ
1/2 [2]
Degrees
Typ.
25
40
Part Number
HLMP-DB25-B00xx
HLMP-KB45-A00xx
Notes:
1. The dominant wavelength,
λ
d
, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
2.
θ
1/2
is the off-axis angle at which the luminous intensity is half of the axial luminous intensity.
Electrical Characteristics at T
A
= 25˚C
Forward
Reverse
Voltage
Breakdown
V
F
(Volts)
V
R
(Volts)
@ I
F
= 20 mA @ I
R
= 100
µ
A
Typ. Max.
Min.
Typ.
4.0
4.0
5.0
5.0
5.0
5.0
30
30
Thermal
Resistance
Capacitance Rθ
J-PIN
(
°
C/W)
C (pF), V
F
= 0, Junction to
f = 1 MHz
Cathode Lead
Typ.
Typ.
97
97
260
290
Part
Number
HLMP-DB25-B00xx
HLMP-KB45-A00xx
Speed
Response
τ
s
(ns)
Typ.
500
500
1.0
I
F
– FORWARD CURRENT – mA
60
50
40
30
20
10
0
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
1.6
RELATIVE INTENSITY
1.4
0.5
1.2
0
350 400 450 500 550 600 650 700
WAVELENGTH – nm
0
1
2
3
4
5
1.0
20
30
40
50
60
70
80
V
F
– FORWARD VOLTAGE – V
I
P
– PEAK FORWARD CURRENT – mA
Figure 1. Relative Intensity vs.
Wavelength.
Figure 2. Forward Current vs.
Forward Voltage.
Figure 3. Relative Intensity vs. Peak
Forward Current (300
µ
s pulse
width, 10 ms period).
4
RATIO OF PEAK CURRENT TO
TEMPERATURE DERATED DC CURRENT
10
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
I
F
– FORWARD CURRENT – mA DC
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
35
30
25
20
15
10
5
0
0
10 20 30 40 50 60 70 80 90
T
A
– AMBIENT TEMPERATURE – °C
100
300
10
z
KH
1K
Hz
3K
Hz
Hz
RE
FR
HR
ES
AT
E
Hz
1
1.00E-06 1.00E-05 1.00E-04 1.00E-03 1.00E-02
0
5
10
15
20
25
30
35
PULSE WIDTH (SECONDS)
I
F
– DC FORWARD CURRENT – mA
Figure 4. Forward Current vs.
Forward Voltage.
Figure 5. Relative Luminous Intensity
vs. Forward Current.
Figure 6. Maximum DC Forward
Current vs. Ambient Temperature.
Derating Based on T
J
Max. = 115
°
C.
20°
30°
40°
50°
10°
0°
1.0
.8
.6
60°
70°
80°
90°
.4
.2
10° 20° 30° 40° 50° 60° 70° 80° 90°100°
Figure 7. Relative Luminous Intensity vs. Angular Displacement
for HLMP-DB25.
20°
30°
40°
50°
10°
0°
1.0
.8
.6
60°
70°
80°
90°
.4
.2
10° 20° 30° 40° 50° 60° 70° 80° 90°100°
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride,
trichloroethylene, carbon
tetrachloride, etc.) are not
recommended for cleaning LED
parts. All of these various
solvents attack or dissolve the
encapsulating epoxies used to
form the package of plastic LED
parts.
For information on soldering
LEDs, please refer to Application
Note 1027.
Figure 8. Relative Luminous Intensity vs. Angular Displacement
for HLMP-KB45.
5
Intensity Bin Limits
Bin
A
B
C
D
E
F
G
H
J
K
L
M
N
Intensity Range (mcd)
Min.
Max.
30.0
40.0
40.0
50.0
50.0
65.0
65.0
85.0
85.0
110.0
110.0
140.0
140.0
180.0
180.0
240.0
240.0
310.0
310.0
400.0
400.0
520.0
520.0
680.0
680.0
880.0
Color Bin Limits
(nm at 20 mA)
Blue
Bin ID
1
2
3
4
5
nm @ 20 mA
Min.
Max.
460.0
464.0
464.0
468.0
472.0
476.0
468.0
472.0
476.0
480.0
Tolerance for each bin limit will be
±
0.5nm.
Mechanical Option Matrix
Mechanical Option Code
00
02
DD
Definition
Bulk Packaging, minimum increment 500 pcs/bag
Tape & Reel, straight leads, minimum increment 1300 pcs/bag
Ammo Pack, straight leads with minimum increment
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
Microchip MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
