July 2007
HY[B/I]18T1G400B[F/C](L)
HY[B/I]18T1G800B[F/C](L)
HY[B/I]18T1G16[0/7]B[F/C](L/V)
1-Gbit Double-Data-Rate-Two SDRAM
DDR2 SDRAM
RoHS Compliant Products
Internet Data Sheet
Rev. 1.3
Internet Data Sheet
HY[B/I]18T1G[40/80/16]0B[C/F](L/V)
1-Gbit Double-Data-Rate-Two SDRAM
HY[B/I]18T1G400B[F/C](L), HY[B/I]18T1G16[0/7]B[F/C](L/V), HY[B/I]18T1G800B[F/C](L)
Revision History: 2007-07, Rev. 1.3
Page
All
Subjects (major changes since last revision)
Adapted internet edition
Added PG-TFBGA-92
HYB18T1G167BF-3.7, HYB18T1G167BF-3S, HYB18T1G167BF-3, HYB18T1G167BF-2.5,
HYB18T1G167BF-25F, HYB18T1G160BFV-3.7, HYB18T1G160BFV-3S
Previous Revision: 2007-05, Rev. 1.2
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
techdoc@qimonda.com
qag_techdoc_rev400 / 3.2 QAG / 2006-07-21
03062006-ZNH8-HURV
2
Internet Data Sheet
HY[B/I]18T1G[40/80/16]0B[C/F](L/V)
1-Gbit Double-Data-Rate-Two SDRAM
1
Overview
This chapter gives an overview of the 1-Gbit Double-Data-Rate-Two SDRAM product family and describes its main
characteristics.
1.1
Features
The 1-Gbit Double-data-Rate SDRAM offers the following key features:
• Off-Chip-Driver impedance adjustment (OCD) and On-
• 1.8 V
±
0.1 V Power Supply
1.8 V
±
0.1 V (SSTL_18) compatible I/O
Die-Termination (ODT) for better signal quality
• DRAM organizations with 4, 8 and 16 data in/outputs
• Auto-Precharge operation for read and write bursts
• Double Data Rate architecture: two data transfers per
• Auto-Refresh, Self-Refresh and power saving Power-
clock cycle four internal banks for concurrent operation
Down modes
• Programmable CAS Latency: 3, 4, 5 and 6
• Average Refresh Period 7.8
µs
at a
T
CASE
lower than
• Programmable Burst Length: 4 and 8
85 °C, 3.9
µs
between 85 °C and 95 °C
• Differential clock inputs (CK and CK)
• Programmable self refresh rate via EMRS2 setting
• Programmable partial array refresh via EMRS2 settings
• Bi-directional, differential data strobes (DQS and DQS) are
transmitted / received with data. Edge aligned with read
• DCC enabling via EMRS2 setting
• Full and reduced Strength Data-Output Drivers
data and center-aligned with write data
• DLL aligns DQ and DQS transitions with clock
• 1K page size for
×4
&
×8,
2K page size for
×16
• Package: P(G)-TFBGA-68 , P(G)-TFBGA-84
• DQS can be disabled for single-ended data strobe
operation
and PG-TFBGA-92
• RoHS Compliant Products
1)
• Commands entered on each positive clock edge, data and
data mask are referenced to both edges of DQS
• All Speed grades faster than DDR2–400 comply with
DDR2–400 timing specifications when run at a clock rate
• Data masks (DM) for write data
• Posted CAS by programmable additive latency for better
of 200 MHz.
command and data bus efficiency
TABLE 1
Performance Tables for –2.5(F)
Product Type Speed Code
Speed Grade
Max. Clock Frequency
@CL6
@CL5
@CL4
@CL3
Min. RAS-CAS-Delay
Min. Row Precharge Time
Min. Row Active Time
Min. Row Cycle Time
–2.5F
DDR2–800D 5–5–5
–2.5
DDR2–800E 6–6–6
400
333
266
200
15
15
45
60
Unit
—
MHz
MHz
MHz
MHz
ns
ns
ns
ns
f
CK6
f
CK5
f
CK4
f
CK3
t
RCD
t
RP
t
RAS
t
RC
400
400
266
200
12.5
12.5
45
57.5
1) RoHS Compliant Product: Restriction of the use of certain hazardous substances (RoHS) in electrical and electronic equipment as defined
in the directive 2002/95/EC issued by the European Parliament and of the Council of 27 January 2003. These substances include mercury,
lead, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers.
Rev. 1.3, 2007-07
03062006-ZNH8-HURV
3
Internet Data Sheet
HY[B/I]18T1G[40/80/16]0B[C/F](L/V)
1-Gbit Double-Data-Rate-Two SDRAM
TABLE 2
Performance Table for –3(S)
Product Type Speed Code
Speed Grade
Max. Clock Frequency
@CL5
@CL4
@CL3
Min. RAS-CAS-Delay
Min. Row Precharge Time
Min. Row Active Time
Min. Row Cycle Time
–3
DDR2–667C 4–4–4
–3S
DDR2–667D 5–5–5
333
266
200
15
15
45
60
Unit
—
MHz
MHz
MHz
ns
ns
ns
ns
f
CK5
f
CK4
f
CK3
t
RCD
t
RP
t
RAS
t
RC
333
333
200
12
12
45
57
TABLE 3
Performance table for –3.7
Product Type Speed Code
Speed Grade
Max. Clock Frequency
@CL5
@CL4
@CL3
Min. RAS-CAS-Delay
Min. Row Precharge Time
Min. Row Active Time
Min. Row Cycle Time
–3.7
DDR2–533C 4–4–4
Unit
—
MHz
MHz
MHz
ns
ns
ns
ns
f
CK5
f
CK4
f
CK3
t
RCD
t
RP
t
RAS
t
RC
266
266
200
15
15
45
60
TABLE 4
Performance Table for –5
Product Type Speed Code
Speed Grade
Max. Clock Frequency
@CL5
@CL4
@CL3
Min. RAS-CAS-Delay
Min. Row Precharge Time
Min. Row Active Time
Min. Row Cycle Time
–5
DDR2–400B 3–3–3
Units
—
MHz
MHz
MHz
ns
ns
ns
ns
f
CK5
f
CK4
f
CK3
t
RCD
t
RP
t
RAS
t
RC
200
200
200
15
15
40
55
Rev. 1.3, 2007-07
03062006-ZNH8-HURV
4
Internet Data Sheet
HY[B/I]18T1G[40/80/16]0B[C/F](L/V)
1-Gbit Double-Data-Rate-Two SDRAM
1.2
Description
latched at the cross point of differential clocks (CK rising and
CK falling). All I/Os are synchronized with a single ended
DQS or differential DQS-DQS pair in a source synchronous
fashion.
A 17-bit address bus for
×4
and
×8
organised components
and a 16 bit address bus for
×16
components is used to
convey row, column and bank address information in a RAS-
CAS multiplexing style.
The DDR2 device operates with a 1.8 V
±
0.1 V power
supply. An Auto-Refresh and Self-Refresh mode is provided
along with various power-saving power-down modes.
The functionality described and the timing specifications
included in this data sheet are for the DLL Enabled mode of
operation.
The DDR2 SDRAM is available in P(G)-TFBGA-68 and P(G)-
TFBGA-84 packages.
The 1-Gbit DDR2 DRAM is a high-speed Double-Data-Rate-
Two CMOS Synchronous DRAM device, containing
1,073,741,824 bits and internally configured as anoctal
quadbank DRAM. The 1-Gbit device is organized as either
32 Mbit
×4
I/O
×8
banks, 16 Mbit
×8
I/O
×8
banks or 8 Mbit
×16
I/O
×8
banks chip. These devices achieve high speed
transfer rates starting at 400 Mb/sec/pin for general
applications.
The device is designed to comply with all DDR2 SDRAM key
features:
1. Posted CAS with additive latency,
2. Write latency = read latency - 1,
3. Normal and weak strength data-output driver,
4. Off-Chip Driver (OCD) impedance adjustment
5. On-Die Termination (ODT) function.
All of the control and address inputs are synchronized with a
pair of externally supplied differential clocks. Inputs are
TABLE 5
Ordering Information for Lead-Free Products (RoHS Compliant)
Product Type
HYB18T1G400BF-2.5F
HYB18T1G800BF-2.5F
HYB18T1G160BF-2.5F
HYB18T1G167BF-2.5F
HYB18T1G400BF-2.5
HYB18T1G800BF-2.5
HYB18T1G160BF-2.5
HYB18T1G167BF-2.5
HYB18T1G400BF-3
HYB18T1G800BF-3
HYB18T1G160BF-3
HYB18T1G167BF-3
HYB18T1G400BF-3S
HYB18T1G400BFL-3S
HYB18T1G800BF-3S
HYB18T1G800BFL-3S
HYB18T1G160BF-3S
HYB18T1G160BFL-3S
HYB18T1G160BFV-3S
HYB18T1G167BF-3S
Org. Speed
×4
×8
×16
×16
×4
×8
×16
×16
×4
×8
×16
×16
×4
×4
×8
×8
×16
×16
×16
×16
PG-TFBGA-92
PG-TFBGA-84
DDR2-667D 5-5-5
333
PG-TFBGA-84
PG-TFBGA-92
PG-TFBGA-68
DDR2-667C 4-4-4
333
PG-TFBGA-84
PG-TFBGA-92
PG-TFBGA-68
DDR2-800E 6-6-6
400
PG-TFBGA-84
PG-TFBGA-92
PG-TFBGA-68
CAS-RCD-RP Latencies
1)2)3)
Clock (MHz) Package
400
PG-TFBGA-68
Note
4)
Standard Temperature Range (0
°C
- +70
°C)
DDR2-800D 5-5-5
Rev. 1.3, 2007-07
03062006-ZNH8-HURV
5
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
