Freescale Semiconductor, Inc.
Data Sheet: Technical Data
KV10P48M75
Rev 4, 02/2015
Kinetis V Series KV10, 32/16 KB
Flash
75 MHz Cortex-M0+ Based Microcontroller
The Kinetis V Series KV1x MCU family is the entry point into the
V Series and provides a high-performance, cost-competitive
solution for 3-phase sensorless BLDC and PMSM motor control.
Built upon the ARM® Cortex®-M0+ based core running at 75
MHz with hardware square root and divide capability, it delivers a
35% increase in performance versus comparable MCUs allowing
it to target BLDC as well as PMSM motors.
Additional features include:
• dual 16-bit analog-to-digital controllers (ADCs) sampling at
up to 1.2 MS/s in 12-bit mode.
• multiple motor control timers, up to 32 KB of flash memory
and a comprehensive enablement suite from Freescale
• third-party resources including reference designs, software
libraries and powerful motor configuration tools
MKV10Z32VLC7
MKV10Z32VFM7
MKV10Z32VLF7
MKV10Z16VLC7
MKV10Z16VFM7
MKV10Z16VLF7
32 QFN
5 x 5 x 0.9 mm Pitch
0.5 mm
32 LQFP
7 x 7 x 1.4 mm Pitch
0.8 mm
48 LQFP
7 x 7 x 1.4 mm Pitch 0.5 mm
Performance
• Up to 75 MHz ARM Cortex-M0+ based core
Memories and memory interfaces
• Up to 32 KB of program flash memory
• Up to 8 KB of RAM
System peripherals
• Nine low-power modes to provide power optimization
based on application requirements
• 4-channel DMA controller
• SWD interface and Micro Trace buffer
• Bit Manipulation Engine (BME)
• External watchdog timer
• Advanced independent clocked watchdog
• Memory Mapped Divide and Square Root (MMDVSQ)
module
Clocks
• 32 to 40 kHz or 3 to 32 MHz crystal oscillator
• Multipurpose clock generator (MCG) with frequency-
locked loop referencing either internal or external
reference clock
Security and integrity modules
• 80-bit unique identification (ID) number per chip
• Hardware CRC module
Communication interfaces
• One 16-bit SPI module
• One I2C module
• Two UART modules
Timers
• Programmable delay block
• One 6-channel FlexTimer (FTM) for motor control/
general purpose applications
• Two 2-channel FlexTimers (FTM) with quadrature
decoder functionality
• 16-bit low-power timer (LPTMR)
Operating Characteristics
• Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): –40 to 105°C
Analog modules
• Two 16-bit SAR ADCs
• 12-bit DAC
• Analog comparator (CMP) containing a 6-bit DAC
and programmable reference input
Human-machine interface
• General-purpose I/O
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. © 2014–2015 Freescale
Semiconductor, Inc. All rights reserved.
Ordering Information
1
Part Number
Flash (KB)
MKV10Z32VLC7
MKV10Z32VFM7
MKV10Z32VLF7
MKV10Z16VLC7
MKV10Z16VFM7
MKV10Z16VLF7
32
32
32
16
16
16
Memory
SRAM (KB)
8
8
8
8
8
8
28
28
40
28
28
40
Maximum number of I\O's
1. To confirm current availability of ordererable part numbers, go to
http://www.freescale.com
and perform a part number
search.
Related Resources
Type
Selector
Guide
Product Brief
Reference
Manual
Data Sheet
Chip Errata
Package
drawing
Description
The Freescale Solution Advisor is a web-based tool that features
interactive application wizards and a dynamic product selector.
The Product Brief contains concise overview/summary information to
enable quick evaluation of a device for design suitability.
The Reference Manual contains a comprehensive description of the
structure and function (operation) of a device.
The Data Sheet includes electrical characteristics and signal
connections.
Resource
Solution Advisor
KV10PB
1
KV10P48M75RM
1
This document
The chip mask set Errata provides additional or corrective information for KV10Z_1N81H
1
a particular device mask set.
Package dimensions are provided in package drawings.
QFN 32-pin: 98ASA00473D
1
LQFP 32-pin: 98ASH70029A
1
LQFP 48-pin: 98ASH00962A
1
1. To find the associated resource, go to
http://www.freescale.com
and perform a search using this term.
2
Freescale Semiconductor, Inc.
Kinetis V Series KV10, 32/16 KB Flash, Rev4, 02/2015.
Figure 1. KV10 block diagram
Kinetis V Series KV10, 32/16 KB Flash, Rev4, 02/2015.
3
Freescale Semiconductor, Inc.
Table of Contents
1 Ratings.................................................................................... 5
1.1 Thermal handling ratings................................................. 5
1.2 Moisture handling ratings................................................ 5
1.3 ESD handling ratings....................................................... 5
1.4 Voltage and current operating ratings............................. 5
2 General................................................................................... 6
2.1 AC electrical characteristics.............................................6
2.2 Nonswitching electrical specifications..............................7
2.2.1 Voltage and current operating requirements....... 7
2.2.2 LVD and POR operating requirements................8
2.2.3 Voltage and current operating behaviors.............9
2.2.4 Power mode transition operating behaviors........ 9
2.2.5 Power consumption operating behaviors............ 10
2.2.6 EMC radiated emissions operating behaviors..... 16
2.2.7 Designing with radiated emissions in mind..........17
2.2.8 Capacitance attributes.........................................17
2.3 Switching specifications...................................................17
2.3.1 Device clock specifications..................................17
2.3.2 General switching specifications......................... 18
2.4 Thermal specifications..................................................... 19
2.4.1 Thermal operating requirements......................... 19
2.4.2 Thermal attributes................................................19
3 Peripheral operating requirements and behaviors.................. 20
3.1 Core modules.................................................................. 20
3.1.1 SWD Electricals ..................................................20
3.2 System modules.............................................................. 21
3.3 Clock modules................................................................. 21
3.3.1 MCG specifications..............................................21
3.3.2 Oscillator electrical specifications........................23
3.4 Memories and memory interfaces................................... 25
3.4.1 Flash electrical specifications.............................. 25
3.5 Security and integrity modules........................................ 26
3.6 Analog............................................................................. 27
3.6.1
ADC electrical specifications............................... 27
3.6.2 CMP and 6-bit DAC electrical specifications....... 31
3.6.3 12-bit DAC electrical characteristics....................33
3.7 Timers..............................................................................36
3.8 Communication interfaces............................................... 36
3.8.1 DSPI switching specifications (limited voltage
range).................................................................. 36
DSPI switching specifications (full voltage
range).................................................................. 38
3.8.3 I2C....................................................................... 40
3.8.4 UART...................................................................40
Dimensions............................................................................. 40
4.1 Obtaining package dimensions....................................... 40
Pinout...................................................................................... 41
5.1 Signal Multiplexing and Pin Assignments........................ 41
5.2 KV10 Pinouts................................................................... 43
Ordering parts......................................................................... 46
6.1 Determining valid orderable parts....................................46
Part identification.....................................................................46
7.1 Description.......................................................................47
7.2 Format............................................................................. 47
7.3 Fields............................................................................... 47
7.4 Example...........................................................................47
Terminology and guidelines.................................................... 48
8.1 Definition: Operating requirement....................................48
8.2 Definition: Operating behavior......................................... 48
8.3 Definition: Attribute.......................................................... 48
8.4 Definition: Rating............................................................. 49
8.5 Result of exceeding a rating............................................ 49
8.6 Relationship between ratings and operating
requirements....................................................................50
8.7 Guidelines for ratings and operating requirements..........50
8.8 Definition: Typical value...................................................51
8.9 Typical Value Conditions................................................. 52
9 Revision history.......................................................................52
3.8.2
4
5
6
7
8
4
Freescale Semiconductor, Inc.
Kinetis V Series KV10, 32/16 KB Flash, Rev4, 02/2015.
Ratings
1 Ratings
1.1 Thermal handling ratings
Symbol
T
STG
T
SDR
Description
Storage temperature
Solder temperature, lead-free
Min.
–55
—
Max.
150
260
Unit
°C
°C
Notes
1
2
1. Determined according to JEDEC Standard JESD22-A103,
High Temperature Storage Life.
2. Determined according to IPC/JEDEC Standard J-STD-020,
Moisture/Reflow Sensitivity Classification for Nonhermetic
Solid State Surface Mount Devices.
1.2 Moisture handling ratings
Symbol
MSL
Description
Moisture sensitivity level
Min.
—
Max.
3
Unit
—
Notes
1
1. Determined according to IPC/JEDEC Standard J-STD-020,
Moisture/Reflow Sensitivity Classification for Nonhermetic
Solid State Surface Mount Devices.
1.3 ESD handling ratings
Symbol
V
HBM
V
CDM
I
LAT
Description
Electrostatic discharge voltage, human-body model
Electrostatic discharge voltage, charged-device
model
Latch-up current at ambient temperature of 105 °C
Min.
-2000
-500
-100
Max.
+2000
+500
+100
Unit
V
V
mA
Notes
1
2
1. Determined according to JEDEC Standard JESD22-A114,
Electrostatic Discharge (ESD) Sensitivity Testing Human
Body Model (HBM).
2. Determined according to JEDEC Standard JESD22-C101,
Field-Induced Charged-Device Model Test Method for
Electrostatic-Discharge-Withstand Thresholds of Microelectronic Components.
1.4 Voltage and current operating ratings
Kinetis V Series KV10, 32/16 KB Flash, Rev4, 02/2015.
5
Freescale Semiconductor, Inc.
模拟电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
