Simplifying System Integration
TM
73S1210F
Evaluation Board User Guide
August 18, 2009
Rev. 1.2
UG_1210F_035
73S1210F Evaluation Board User Guide
UG_1210F_035
© 2009 Teridian Semiconductor Corporation. All rights reserved.
Teridian Semiconductor Corporation is a registered trademark of Teridian Semiconductor Corporation.
Simplifying System Integration is a trademark of Teridian Semiconductor Corporation.
Microsoft, Windows and Vista are registered trademarks of Microsoft Corporation.
Signum is a trademark of Signum Systems Corporation.
Keil is a trademark of ARM® Ltd.
All other trademarks are the property of their respective owners.
Teridian Semiconductor Corporation makes no warranty for the use of its products, other than expressly
contained in the Company’s warranty detailed in the Teridian Semiconductor Corporation standard Terms
and Conditions. The company assumes no responsibility for any errors which may appear in this
document, reserves the right to change devices or specifications detailed herein at any time without
notice and does not make any commitment to update the information contained herein. Accordingly, the
reader is cautioned to verify that this document is current by comparing it to the latest version on
http://www.teridian.com or by checking with your sales representative.
Teridian Semiconductor Corp., 6440 Oak Canyon, Suite 100, Irvine, CA 92618
TEL (714) 508-8800, FAX (714) 508-8877, http://www.teridian.com
2
Rev. 1.2
UG_1210F_035
73S1210F Evaluation Board User Guide
Table of Contents
1
Introduction ................................................................................................................................... 4
1.1
Evaluation Kit Contents......................................................................................................... 5
1.2
Evaluation Board Features .................................................................................................... 5
1.3
Recommended Equipment and Test Tools ............................................................................ 5
2
Evaluation Board Setup................................................................................................................. 6
2.1
Connecting the Evaluation Board with an Emulation Tool ...................................................... 7
2.2
Loading User Code into the Evaluation Board ....................................................................... 8
3
Using the PCCID Application ...................................................................................................... 10
3.1
Host Demonstration Software Installation ............................................................................ 10
4
Evaluation Board Hardware Description .................................................................................... 11
4.1
Jumpers, Switches and Modules ......................................................................................... 11
4.2
Test Points ......................................................................................................................... 16
4.3
Schematic........................................................................................................................... 17
4.4
PCB Layouts....................................................................................................................... 18
4.5
Bill of Materials ................................................................................................................... 24
4.6
Schematic Information ........................................................................................................ 26
4.6.1 Reset Circuit.............................................................................................................. 26
4.6.2 Oscillator ................................................................................................................... 26
4.6.3 LCD .......................................................................................................................... 27
4.6.4 Smart Card Interface ................................................................................................. 28
5
Ordering Information ................................................................................................................... 29
6
Related Documentation ............................................................................................................... 29
7
Contact Information..................................................................................................................... 29
Revision History .................................................................................................................................. 30
Figures
Figure 1: 1210F Evaluation Board ............................................................................................................ 4
Figure 2: 73S1210F Evaluation Board Basic Connections ........................................................................ 6
Figure 3: 73S1210F Evaluation Board Basic Connections with ADM-51 ICE ............................................ 7
Figure 4: Emulator Window Showing RESET and ERASE Buttons........................................................... 9
Figure 5: Emulator Window Showing Erased Flash Memory and File Load Menu ..................................... 9
Figure 6: 73S1210F Evaluation Board Jumper, Switch and Module Locations ........................................ 15
Figure 7: 73S1210F Evaluation Board Electrical Schematic ................................................................... 17
Figure 8: 73S1210F Evaluation Board Top View (Silkscreen) ................................................................. 18
Figure 9: 73S1210F Evaluation Board Bottom View (Silkscreen) ............................................................ 19
Figure 10: 73S1210F Evaluation Board Top Signal Layer ...................................................................... 20
Figure 11: 73S1210F Evaluation Board Middle Layer 1 – Ground Plane................................................. 21
Figure 12: 73S1210F Evaluation Board Middle Layer 2 – Supply Plane ................................................. 22
Figure 13: 73S1210F Evaluation Board Bottom Signal Layer ................................................................. 23
Figure 14: External Components for RESET .......................................................................................... 26
Figure 15: Oscillator Circuit .................................................................................................................... 26
Figure 16: LCD Connections .................................................................................................................. 27
Figure 17: Smart Card Connections ....................................................................................................... 28
Tables
Table 1: Flash Programming Interface Signals ......................................................................................... 8
Table 2: Evaluation Board Jumper, Switch and Module Description ....................................................... 11
Table 3: Evaluation Board Test Point Description................................................................................... 16
Table 4: 73S1210F Evaluation Board Bill of Materials ............................................................................ 24
Rev. 1.2
3
73S1210F Evaluation Board User Guide
UG_1210F_035
1 Introduction
The Teridian Semiconductor Corporation (TSC) 73S1210F Evaluation Board is used to demonstrate the
capabilities of the 73S1210F Smart Card Controller devices. It has been designed to operate either as a
standalone or as a development platform.
The 73S1210F Evaluation Board can be programmed to run any of the Teridian turnkey applications or a
user-developed custom application. Teridian provides its USB CCID application preloaded on the board
and an EMV testing application on the CD.
Applications can be downloaded through the In-Circuit-Emulator (ICE) or through the TSC Flash
Programmer Model TFP2. As a development tool, the evaluation board can operate in conjunction with
an ICE to develop and debug 73S1210F based embedded applications.
The 73S1210F Evaluation Board uses the same PWB as the 73S1217F. The 73S1217F has
some features that the73S1210F does not contain. These include the 32 kHz oscillator and
USB interface. These features are depopulated on the 73S1210F Evaluation Board.
Figure 1: 1210F Evaluation Board
4
Rev. 1.2
UG_1210F_035
73S1210F Evaluation Board User Guide
1.1
•
•
•
•
•
Evaluation Kit Contents
The 73S1210F Evaluation Kit contains the following:
73S1210F Evaluation Board: 4-layer, rectangular PCB as shown in
Figure 1
(identification number
E1217FN12B1 Rev B), containing the 73S1210F with the preloaded Pseudo-CCID (PCCID) program.
5 VDC/1,000 mA universal wall transformer with 1.0 mm plug ID (CUI Inc. – EPAS-101W-05).
Serial cable: DB9, male/female, 2 meter length (Digi-Key AE1379-ND).
CD containing documentation (data sheet, and user guides), Software API libraries, evaluation code,
and utilities.
The 73S1210F Evaluation Board Lite Quick Start Guide document.
1.2
•
•
•
•
•
•
Evaluation Board Features
The 73S1210F Evaluation Board (see Figure 1) includes the following:
RS-232 interface
Dual smart card interface
ICE/Programmer interface
2 line x 16 character LCD module
6 x 5 Keypad
1 LED
1.3
Recommended Equipment and Test Tools
The following equipment and tools (not provided) are recommended for use with the 73S1210F
Evaluation Kit:
•
•
For functional evaluation: PC with Microsoft
®
Windows
®
XP or Vista
®
equipped with an RS232 (COM)
port with DB9 connector.
For software development (MPU code)
Signum™ ICE (In Circuit Emulator): ADM-51. Refer to
http://signum.temp.veriohosting.com/Signum.htm
.
Keil™ 8051 C Compiler Kit: CA51. Refer to
http://www.keil.com/c51/ca51kit.htm,
and
http://www.keil.com/product/sales.htm
Rev. 1.2
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
