STEVAL-ISA126V1
5 V-2 A, 115 kHz flyback with temporary extra-power
management based on the VIPER28HN
Data brief
Description
This document describes a 5 V-2 A application
with 3.3 A peak current capability for 1.9 sec,
using VIPer28H, a new off-line high voltage
converter from STMicroelectronics.
In some applications an SMPS, normally
supposed to deliver a certain amount of power,
from time to time undergoes load peaks that can
be even two or more times as much, but only for
a time interval which is short if compared to the
thermal time constants of the power components.
Typical examples of such loads are printers and
audio systems.
In these cases, it is more cost-effective to
thermally design the system for the maximum
continuous power and not for the peak power
demand, which will be sustained only for a limited
time window.
Such a design is possible thanks to the EPT
function of VIPER28H, which allows the designer
to fix the maximum time window during which the
converter is able to manage the peak power still
maintaining output voltage regulation. If the
overload lasts more than this time window, the
converter is automatically shut down in auto-
restart mode, in order to avoid the damaging of
the power components.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Input Voltage range: 90 V
RMS
to 265 V
RMS
Output Voltage: 5 V
Max Output Current: I
OUTmax
2 A
Peak Output Current: I
OUTpk
3 A
Precision of output regulation: ΔV
OUT_LF
±5%
High Frequency output Voltage ripple:
ΔV
OUT_HF
50 mV
Max ambient operating temperature: TA 60
ºC
800 V avalanche rugged power section
PWM operation , at 115 kHz with frequency
jittering for lower EMI
Limiting current with adjustable set point
On-board soft-start
Safe auto-restart after a fault condition, low
stand-by power (< 50 mW at 265 Vac)
Adjustable and accurate over voltage
protection, thermal shutdown with
hysteresis, delayed overload protection
RoHS compliant
December 2013
DocID025423 Rev 1
1/4
www.st.com
For further information contact your local STMicroelectronics sales
office
STEVAL-ISA126V1
Please Read Carefully
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries
("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and
services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST
assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If
any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use
of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the
use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT
LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR
EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS
LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY
REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR
(D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE,
THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR
"AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL" INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN
SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN
AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall
immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in
any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy
- Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United
States of America
www.st.com
4/4
DocID025423 Rev 1
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
