STM32100E-EVAL
STM32100E-EVAL evaluation board
Data brief
Features
■
Three 5V power supply options:
– Power jack
– ST-LINK/V2 connector
– Daughterboard
Boot from user Flash, system memory or
SRAM
1 Gbyte (or more) MicroSD card
16 Mbytes of serial Flash memory
2 Mbytes of SRAM
64 Kbits of EEPROM
Embedded ST-LINK/V2 debugger and
programmer
I
2
C/SMBus compatible serial interface
temperature sensor
2-channel RS-232 communication interface
with RTS/CTS handshake support on one
channel
1-channel RS-485 communication interface
sharing the USART1 connector
Extension connector for daughterboard or
wrapping board
IrDA transceiver
IR receiver
Inductor motor control connector
HDMI with CEC connection
JTAG and SWD debug support
3.2" TFT color LCD with touch screen
Joystick with 4-direction control and selector
Reset, wakeup, tamper and user buttons
4 LEDs
Speaker
RTC with backup battery
HDMI with CEC connection
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Description
The STM32100E-EVAL evaluation board is
designed as a complete development platform for
the STMicroelectronics ARM
®
Cortex-M3 core-
based STM32F100 microcontroller.
A full range of hardware features helps you
evaluate all peripherals (HDMI CEC, SRAM,
motor control, LCD, MicroSD card, Serial Flash,
EEPROM, temperature sensor, speaker, IrDA,
RS-232 and RS-485 interfaces) and develop your
own applications.
Extension headers facilitate the connection of a
daughterboard or wrapping board for your specific
application.
The in-circuit ST-LINK/V2 tool can be easily used
for JTAG and SWD interface debugging and
programming.
March 2011
Doc ID 018496 Rev 1
1/3
www.st.com
3
For further information contact your local STMicroelectronics sales office.
STM32100E-EVAL evaluation board
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 018496 Rev 1
3/3
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
