Card information
The PT MCU CARD 2 is shown on
Figure 1.
It contains
PIC32MX460F512L
microcontroller with on-chip peripherals and is a great choice for both beginners and professionals.
After testing and building the final program, this card can also be taken out of the board socket and used in your final device.
1
PIC32MX460F512L
has
80MHz
maximum frequency,
512K bytes
of program
memory (flash),
32K bytes
of data memory. It has
USB
(OTG, Host, Device),
85 General purpose
I/O pins,
5
16-bit timers,
10-bit
ADC
(16 ch), 2
UARTs,
internal 8 MHz and 32kHz oscillators, internal Real time clock (RTC), 2
I2C,
2
SPI
controllers. It also contains 2
analog comparators
and programming and
debugging interface.
2
1
2
3
8MHz crystal oscillator.
We carefully chose the most convenient crystal
value that provides clock frequency which can be used directly, or with the PLL
multipliers to create higher MCU clock value. MCU card also contains 32.768 kHz
crystal oscillator which provides external clock waveform for RTCC module.
3
USB communications lines.
These two jumpers, when in USB position, connect
D+ and D- lines of the on-board USB connector with RG2 and RG3 microcontroller
pins. Since
PIC32MX460F512L
supports USB, jumpers are in USB position.
Figure 1: MCU card with PIC32MX460F512L
page 2
v7
If you want to learn more about our products, please visit our website at
www.mikroe.com
If you are experiencing some problems with any of our products or just need additional
information, please place your ticket at
www.mikroe.com/esupport
If you have any questions, comments or business proposals,
do not hesitate to contact us at
office@mikroe.com
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
