KPT/KPSE
CONNECTORS
KP-6/898
KPT/KPSE
Contents
Introduction............................................................. 2
Standard Data........................................................ 3
Series KPT............................................................. 4
Series KPSE........................................................... 6
Contact arrangements............................................ 9
Wall mounting receptacles....................................13
Cable connecting plugs...........................................14
Box mounting receptacles......................................15
Thru-bulkhead receptacles....................................15
Straight plugs.......................................................16
Jam nut receptacles.............................................17
Right angle plugs.................................................18
Special versions
Connectors with grounding continuity.................19
Receptacles with straight solder pins................. 22
Panel cutouts........................................................ 24
Dummy receptacle.............................................. 25
Protective caps..................................................... 26
Tools ..................................................................... 27
Assembly instructions ........................................ 28
Cross reference lists ........................................... 29
Product safety information................................... 31
Miniature circular connectors
Introduction
The miniature circular connectors series KPT and
KPSE from ITT Cannon are manufactured acc. to
MIL-C-26482 with three point bayonet coupling and
five-keyway polarization.They offer general purpose
solder connectors and high performance crimp
connectors. The broad product range provides the
most complete familiy of connectors conform to MIL-
C-26482, NFC 93422 HE 301 model, VG 95328 and
LN 29500 specifications.
The versatility of these connectors has been proven
by their usage in general as well as in high per-
formance environmental applications.
In addition to the basic series presented in this
catalogue, connectors for special applications are
available. They include corrosion resistant types,
filter connectors for electromagnetic compatability
and non-outgasing, radiation resistant versions.
All connectors conform to the above mentioned
specifications are fully intermateable and accept a
wide range of interchangeable accessories. Thereby
design modifications can be achieved more easily
and at lower cost with connectors of the KPT/KPSE
series.
2
Subject to changes
KPT/KPSE
Technical Data
KPT
Material and Finishes
Shell
Insulator
Grommet and Seal
Contacts
Mechanical Data
Shell styles
00 – Wall mounting receptacle
01 – Cable connecting plug
02 – Box mounting receptacle
8 thru 24
five keyways/three point bayonet
A – General duty
B – General duty with strain relief
E – Grommet seal
F – Grommet seal with strain relief
Miniature circular connectors
KPSE
Aluminum alloy, conductive olive drab chromate over cadmium finish per QQ-P-416
Polychloroprene
Polychloroprene
Polychloroprene
Polychloroprene
Copper alloy, gold plated
Copper alloy, gold plated
07 – Jam nut receptacle
08 – Plug with 90° termination assemblies
B – Thru-bulkhead receptacle (KPT only)
06 – Straight plug
Shell sizes
Polarisation/Coupling
Service classes
E – Grommet seal
G – Gland seal for jacketed cable
J – Gland nut with strain relief for jacketed cable
P – for potting
see also pages 5 and 8
Water tightness
Operating temperature
Durability
Vibration
Acc. to VG 95319 Part 2, Test No. 5.9.2
For styles A to E and J to W, Z1, Z2 and Z3 and gaskets style A and B only
Test pressure 0,2 bar overpressure
Test duration 48 h
Test temperature 25
±
3°C
The connector shall be free of moisture
– 55 / 125°C
min. 500 mating cycles
200 m/s
2
at 10 to 2000 Hz
Electrical Data
Number of contacts
Wire size AWG
Contact termination
Contact rating
2 thru 61
16 thru 24
Solder
Size AWG
20
16
⊕
5000 MW
Test voltage
Sea level
21336 m
(70 000 ft.)
Rated current A
7,5
22,0
Test current A
7,5
13,0
3 thru 61
12 thru 24
Crimp
Millivolt drop mV
less than 55
less than 50
Insulation resistance
Service rating
Exception
Service rating between the
central contact and the housing
of the coaxial contact
Service class
1
2
1
2
Vrms
1500
2300
375
550
VDC
2100
3200
535
770
With scoop proof connectors
operating voltages
acc. to MIL-C-26482 and
VG 96912 are
permitted
Operating voltage
Service class
1
2
Operating voltage and connector usage
VG 95328
140 VDC/100 VAC
165 VDC/115 VAC
MIL-C-26482
850 VDC/600 VAC
1400 VDC/1000 VAC
Connectors are equipment which must not be separated or mated when used as per determination. As acc. to
specification the connectors are suitable for an operating voltage of 50 V (see Product Safety Information).
However, this is only valid when the connectors are free accessible during operation and consequently might
be touchable. When the connectors will be operated with line voltage, ITT Cannon offers a solution, too. Please
consult factory.
3
KPT/KPSE
KPT General purpose solder contact connectors
Miniature circular connectors
q
General purpose
q
Solder termination
q
Closed entry socket contacts
Series KPT from ITT Cannon offers general purpose
connectors, qualified for use in military applications
but also widely used in industrial applications calling
for a circular connector with fixed contacts for solder
termination.
The KPT series is MIL-C-26482 approved and is
intermateable with all connectors acc. to the above
mentioned specifications.
4
Subject to changes
KPT/KPSE
KPT General purpose solder contact connectors
How to order*
Miniature circular connectors
KPT 02 E 22 - 36 P W
Series Prefix
KPT – ITT Cannon Prefix
Shell style
ITT Cannon designation
00 – wall mounting receptacle
01 – cable connecting plug
02 – box mounting receptacle (class E only), not with
contact arrangement 14A4
06 – straight plug
07 – jam nut receptacle (hermetic version also available)
08 – 90° angle plug
B – thru-bulkhead receptacle (class E only)
Class
A – general duty with intermediate endbell
B – general duty with strain relief
(may be used for potting)
E – with a grommet seal, not for 02 and 3112 (MS Spec)
F – grommet seal with strain relief (MS Spec)
G – gland seal for jacketed cable
J – watertight gland seal with strain relief
for jacketed cable
P – for potting (MS Spec)
Shell sizes
8, 10, 12, 14, 16, 18, 20, 22 und 24
Contact arrangement
see page 9 – 11
Contact type
P – pin
S – socket
Alternate insert position
W, X, Y and Z (omit for normal)
see page 12
Modification code
DN – Shrink boot adapter for shell styles 00, 01, 06 and 07
DZ – Endbell for shielding braids and shrink boots.
Class E will always be used for these modifications.
Consult factory for other modifications. Omit first digit (0) of shell style
indication when using a modification code.
*Note:
The above mentioned order reference explanation refers only to the ITT Cannon
ordering system. For other order references according to a specification, please
consult the cross reference list on pages 29 – 30.
*
5
51单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
