Dissipative Vinyl
Top Layer
Conductive
Grid Mesh
Inner Layer
Specifications
ANSI/ESD S20.20
Standard Document
Electrical Properties
.125"
Charge Decay:
Rtt Resistance:
Rtg Resistance:
Meets Requirements of:
Worksurface
Typical Values
<0.01sec.
1 x 10
6
to < 1 x 10
9
ohms
1 x 10
6
to < 1 x 10
9
ohms
Heat fused vinyl composite
0.125” (3.2mm)
Blue, Grey, Black
Light Embossing
45 Shore “A”
>300 psi
>80 lbs/inch
>80%
>750 cycles
Test Procedures/Method
FTMS 101C, M 4046
ANSI/ESD S4.1 and ESD TR53
ANSI/ESD S4.1 and ESD TR53
Dissipative Vinyl
Bottom Layer
Physical Properties
Construction:
Thickness:
Color:*
Texture:*
Hardness:
Tensile Strength:
Tear Strength:
Elongation:
Abrasion Resistance:
Blue, Grey, Black
If the material is used on top of an already properly
grounded surface,
grounding hardware
may not be
necessary. Where no properly grounded surface is
available,
grounding hardware
is required to provide a
path-to-ground. Rtg compliance verification measurements
must be made as outlined in ESD TR53 with a
surface
resistance meter.
See Tech Bulletin
TB-7000
for Reztore
®
Surface & Mat
Cleaner Application Instructions.
Grounding & Cleaning
ASTM-D412
ASTM-D412
ASTM-D624
ASTM-D412
Tabor-CS17
Other Properties
Heat Resistance:
Chemical Resistance:
Does not melt or burn when coming into contact with hot solder and soldering irons.
Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic
hydrocarbons, mineral oil, aldehydes, and amines
Tolerances:
Desco warrants for one year that Statfree
®
matting products will be
free of defects in materials and workmanship and will guarantee
dissipative/conductive mat properties for the life of the mat.
Damage to matting caused by misuse of any kind, including using
inappropriate cleaners is not covered by
Desco Limited Warranty.
Limited Lifetime Warranty:
Width ± 0.250”
Length ± 0.250” every 1 linear foot of running material.
Thickness ±10%
Matting materials have a tendency to shrink slightly when first unrolled. In applications where length is critical,
allow the material to relax for at least 4 hours before cutting to size. Always trim with a sharp knife or razor blade.
*Color and texture may vary between lots and mills.
For product listings,
Click Here.
RoHS 3, REACH, and Conflict Minerals Statement
See the Desco Industries RoHS 3, REACH, and Conflict
Minerals Statement:
http://www.descoindustries.com/ROHS.aspx
See the Desco Limited Warranty:
http://desco.descoindustries.com/Limited-Warranty.aspx
See the Desco Disclaimer:
http://desco.descoindustries.com/Disclaimer.aspx
Made in the
United States of America
Specifications and procedures subject to change without notice.
STATFREE
®
Z2™, VINYL, DISSIPATIVE, 3-LAYER, 0.125" (3.2MM)
DESCO WEST:
3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
Desco.com
PHONE (909) 627-8178
DESCO EAST:
ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
STATFREE Z2™
DRAWING PM-112
DATE:
July
2017
© 2017 DESCO INDUSTRIES INC.
Employee Owned
GD32 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
