Registered Quality System
ISO 9001
QMI File #004008
Burlington, Ontario, Canada
Material Safety Data Sheet
Revision Date
Prepared by
February 3, 2011
Hetal Shah
Head Office
9347 - 193 Street, Surrey, B.C., V4N 4E7
Technical Information
1-800-201-8822 or
support@mgchemicals.com
Emergency
Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from
www.mgchemicals.com
or fax requests to 1-800-708-9888
Section 1: Product Identification
MSDS Code: 419C - Aerosol
Name: Acrylic Conformal Coating
Related Part Numbers: 419-340G
Use: It provides an all round protective coating for printed circuit board against
moisture, corrosion, weather, and thermal shock.
Section 2: Hazardous Ingredients
CAS#
811-97-2
141-78-6
67-64-1
142-82-5
108-65-6
Chemical Name
1,1,1,2-tetrafluoroethane
Ethyl acetate
Acetone
N-Heptane
PGMEA
Percentage by weight
44-49
26-30
8-9
6-7
5-6
ACGIH TWA
100 ppm
400 ppm
500 ppm
400 ppm
100 ppm
Osha Pel
N/A
N/A
750 ppm
500 ppm
N/A
Osha Stel
N/A
N/A
N/A
500 ppm
N/A
Section 3: Hazards Identification
Eyes:
Skin:
Inhalation:
Ingestion:
Chronic:
Causes severe eye irritation.
May cause skin irritation with pain and stringing, especially when skin is abraded.
Solvents may cause respiratory tract irritation, headaches and possible dizziness.
May cause respiratory and digestive tract irritation.
Prolonged and repeated exposure may cause dermatitis, defatting of the skin, liver and kidney
damage, and adverse central nervous system effects.
Section 4: First Aid Measure
Eyes:
Skin:
Inhalation:
Ingestion:
Remove contact lenses. Flush with water or saline. Get medical aid.
Wash skin with large quantities of soap and water. Get medical aid if symptoms persist.
Immediately remove from exposure to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen. Get medical aid.
Do not induce vomiting. If conscious, give 1 to 2 glasses of water. Get medical aid.
Section 5: Fire Fighting Measures
Autoignition Temperature:
N/A
Extinguishing Media:
General Information:
Flash Point:
-20 °C [-4 °F]
LEL / UEL:
N/A
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Will burn if involved in a fire. Flash back along vapor trail is possible.
Section 6: Accidental Release Measures
Spill Procedure:
Remove all sources of ignition. Provide adequate ventilation. Wear appropriate personal protection.
Sprinkle absorbent compound onto spill, then sweep into a plastic or metal container. Wipe up
further residue with paper towel and place in container. Wash spill area with soap and water.
PAGE 1 / 4
MSDS Code: 419C-Aerosol
Registered Quality System
ISO 9001
QMI File #004008
Burlington, Ontario, Canada
Section 7: Handling and Storage
Handling:
Storage:
Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or
inhale. Do not expose container to heat or flame.
Keep away from sources of ignition. Store in cool, dry, and well-ventilated area, away from
incompatible substances. Keep from freezing.
Section 8: Exposure Controls
Routes of entry:
Ventilation:
Personal Protection:
Eyes, ingestion, inhalation and skin
Use adequate general or local exhaust ventilation to keep airborne concentrations below
exposure limits.
Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate
protective clothing to prevent skin contact. Use a NIOSH approved respirator when
necessary.
Section 9: Physical and Chemical Properties
Physical State:
Aerosol
Boiling Point:
≥66
°C [150 °F]
Odor:
Ether-like, gasoline
and minty
Specific Gravity:
0.874
Solubility in Water:
Partial
Vapor Pressure:
N/A
Evaporation Rate:
Slower than ether
Vapor Density:
Heavier then Air
pH:
N/A
Section 10: Stability and Reactivity
Stability:
Conditions to avoid:
Incompatibilities:
Polymerization:
Decomposition:
Stable at normal temperatures and pressures
Temperatures over 40 °C [104 °F], ignition sources, and incompatible substances
Strong oxidizers, hydrogen peroxide, Lewis or mineral acids
Will not occur
Carbon monoxide, carbon dioxide, nitrogen oxides
Section 11: Toxicological Information
Sensitization:
(effects of repeated exposure)
Carcinogenicity:
(risk of cancer)
Teratogenicity:
(risk of malformation in an unborn fetus)
Reproductive Toxicity:
(risk of sterility)
Mutagenicity:
(risk of heritable genetic effects)
Lethal Exposure
Concentrations:
1,1,1,2 Tetrafluoro ethane
Ethyl Acetate
Acetone
N-Heptane
PGMEA
Ingestion
(LD50):
N/E
4100 mg/kg
mouse
3000 mg/kg
mouse
N/E
8532 mg/kg
rat
Inhalation
(LC50):
Prolonged or repeated skin contact may cause
dermatitis
No
No
No
No
Skin
(LD50):
Inhalation
(TCLo):
50000 ppm/6H/2Y
rat
200 ppm/6M
mouse
12.63 ppm
rabbit
420 mg/m3/12H/2w
rat
N/A
1500 gm/m3/4H rat N/E
45 gm/m3/2H
mouse
44 mg/m3
mouse
>20 ml/kg
rabbit
9400 uL/kg
guinea-pig
103 mg/m3/2H Rat N/E
N/A
>5000 mg/kg
rabbit
PAGE 2 / 4
MSDS Code: 419C-Aerosol
Registered Quality System
ISO 9001
QMI File #004008
Burlington, Ontario, Canada
Section 12: Ecological Information
Volatile Organic compounds, % by weight:
Volatile Organic compounds, grams per liter:
37.8%
330 g/L
Section 13: Disposal Information
General
Information:
Dispose of in accordance with all local, provincial, state, and federal regulations. Water runoff
can cause environmental damage.
Section 14: Transportation Information
Ground:
(all sizes 4 liter and smaller)
Classified as
Consumer Commodity/ORM-D.
Ground:
(all sizes larger than 4 liter)
Shipping Name:
PAINT RELATED MATERIAL,
UN number:
1263,
Class:
3,
Packing Group:
II,
Flash Point: -20 °C.
Shipper must be trained and certified. Refer to TDG regulations (Canada);
Refer to CFR 49 regulations (USA).
Air: Shipper must be trained and certified. Refer to IATA Dangerous Goods Regulations.
Shipping Name:
PAINT RELATED MATERIAL,
UN number:
1263,
Class:
3,
Packing Group:
II,
Flash Point: -20 °C. Subsidiary Risk – nil; Recommend using original MG Chemicals certified outer cartons.
Tape all seams on the carton. Hazard Label required – Flammable Liquid. A double arrow orientation label is
required and is already printed on the original outer carton.
Sea: Shipper must be trained and certified. Refer to IMDG regulations.
Shipping Name:
PAINT RELATED MATERIAL,
UN number:
1263,
Class:
3,
Packing Group:
II,
Flash Point: -20 °C. Storage category “A”, segregation as for class 9 but away from sources of heat and
separated from goods of class 1 except for those in division 1.4.
Section 15: Regulatory Information
CANADA
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
DSL
All ingredients in this product are listed on the Domestic Substances List
WHMIS
This product belongs to the following categories:
B2 Flammable
D2B Toxic Material causing other toxic effects, Skin irritation
Industry and Science Canada
MG Labels products intended for the workplace to conform to WHMIS labeling regulations. Product identification,
net quantity declaration, minimum printing type size heights, and packaging of this product are in compliance.
CAA
(Clean Air Act, USA)
This product does not contain any class 1 ozone depleting substances.
This product does not contain any class 2 ozone depleting substances.
This product does not contain any chemicals listed as hazardous air pollutants.
Health Canada
Products produced by MG Chemicals intended for retail display conform to the Canadian Consumer Labeling
Regulations.
USA
SARA
(Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
None of the chemicals in this product have a reportable quantity.
PAGE 3 / 4
MSDS Code: 419C-Aerosol
Registered Quality System
ISO 9001
QMI File #004008
Burlington, Ontario, Canada
EPCRA
(Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product does not contain any chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372.
TSCA
(Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
California Proposition 65
(Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product does not contain any chemicals listed.
HMIS RATING
HEALTH:
FLAMMABILITY:
PHYSICAL HAZARD:
PERSONAL PROTECTION:
NFPA CODES
3
2
0
1
2
3
1
0
EUROPE
RoHS
This product does not contain any lead, cadmium, mercury, hexavalent chromium, PBB’s, or PBDE’s, and complies
with European RoHS regulations.
WEEE
This product is not a piece of electrical or electronics equipment, and is therefore not governed by this regulation.
Section 16: Other Information
Definitions:
N/A = not applicable, N/E = not established
Disclaimer:
This material safety data sheet is provided as an information resource only. M.G. Chemicals believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of the
user to verify its validity. The buyer assumes all responsibility of using and handling the product in
accordance with federal, state, and local regulations.
PAGE 4 / 4
MSDS Code: 419C-Aerosol
NXP MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
