r
r
TSL2560, TSL2561
LIGHT-TO-DIGITAL CONVERTER
TAOS059N − MARCH 2009
D
Approximates Human Eye Response
D
Programmable Interrupt Function with
D
D
User-Defined Upper and Lower Threshold
Settings
16-Bit Digital Output with SMBus (TSL2560)
at 100 kHz or I
2
C (TSL2561) Fast-Mode at
400 kHz
Programmable Analog Gain and Integration
Time Supporting 1,000,000-to-1 Dynamic
Range
Ripple
Low Active Power (0.75 mW Typical) with
Power Down Mode
RoHS Compliant
PACKAGE CS
6-LEAD CHIPSCALE
(TOP VIEW)
V
DD
1
ADDR SEL 2
GND 3
6 SDA
5 INT
4 SCL
D
Automatically Rejects 50/60-Hz Lighting
D
D
PACKAGE T
6-LEAD TMB
(TOP VIEW)
V
DD
1
ADDR SEL 2
GND 3
6 SDA
5 INT
4 SCL
Description
The TSL2560 and TSL2561 are light-to-digital
converters that transform light intensity to a digital
signal output capable of direct I
2
C (TSL2561) or
SMBus (TSL2560) interface. Each device com-
bines one broadband photodiode (visible plus
infrared) and one infrared-responding photodiode
on a single CMOS integrated circuit capable of
providing a near-photopic response over an
effective 20-bit dynamic range (16-bit resolution).
Two integrating ADCs convert the photodiode
currents to a digital output that represents the
irradiance measured on each channel. This digital
output can be input to a microprocessor where
illuminance (ambient light level) in lux is derived
using an empirical formula to approximate the
human eye response. The TSL2560 device
permits an SMB-Alert style interrupt, and the
TSL2561 device supports a traditional level style
interrupt that remains asserted until the firmware
clears it.
PACKAGE FN
DUAL FLAT NO-LEAD
(TOP VIEW)
V
DD
1
ADDR SEL 2
GND 3
6 SDA
5 INT
4 SCL
PACKAGE CL
6-LEAD ChipLED
(TOP VIEW)
SDA 5
INT 6
V
DD
1
4 SCL
3 ADDR SEL
2 GND
Package Drawings are Not to Scale
While useful for general purpose light sensing applications, the TSL2560/61 devices are designed particularly
for display panels (LCD, OLED, etc.) with the purpose of extending battery life and providing optimum viewing
in diverse lighting conditions. Display panel backlighting, which can account for up to 30 to 40 percent of total
platform power, can be automatically managed. Both devices are also ideal for controlling keyboard illumination
based upon ambient lighting conditions. Illuminance information can further be used to manage exposure
control in digital cameras. The TSL2560/61 devices are ideal in notebook/tablet PCs, LCD monitors, flat-panel
televisions, cell phones, and digital cameras. In addition, other applications include street light control, security
lighting, sunlight harvesting, machine vision, and automotive instrumentation clusters.
The
LUMENOLOGY
r
Company
Texas Advanced Optoelectronic Solutions Inc.
1001 Klein Road
S
Suite 300
S
Plano, TX 75074
S
(972) 673-0759
r
www.taosinc.com
1
r
Copyright
E
2009, TAOS Inc.
TSL2560, TSL2561
LIGHT-TO-DIGITAL CONVERTER
TAOS059N − MARCH 2009
Functional Block Diagram
Channel 0
Visible and IR
Integrating
A/D Converter
V
DD
= 2.7 V to 3.5 V
Channel 1
IR Only
ADDR SEL
Address Select
Command
Register
ADC
Register
Interrupt
INT
SCL
Two-Wire Serial Interface
SDA
Detailed Description
The TSL2560 and TSL2561 are second-generation ambient light sensor devices. Each contains two integrating
analog-to-digital converters (ADC) that integrate currents from two photodiodes. Integration of both channels
occurs simultaneously. Upon completion of the conversion cycle, the conversion result is transferred to the
Channel 0 and Channel 1 data registers, respectively. The transfers are double-buffered to ensure that the
integrity of the data is maintained. After the transfer, the device automatically begins the next integration cycle.
Communication to the device is accomplished through a standard, two-wire SMBus or I
2
C serial bus.
Consequently, the TSL256x device can be easily connected to a microcontroller or embedded controller. No
external circuitry is required for signal conditioning, thereby saving PCB real estate as well. Since the output
of the TSL256x device is digital, the output is effectively immune to noise when compared to an analog signal.
The TSL256x devices also support an interrupt feature that simplifies and improves system efficiency by
eliminating the need to poll a sensor for a light intensity value. The primary purpose of the interrupt function is
to detect a meaningful change in light intensity. The concept of a
meaningful change
can be defined by the user
both in terms of light intensity and time, or persistence, of that change in intensity. The TSL256x devices have
the ability to define a threshold above and below the current light level. An interrupt is generated when the value
of a conversion exceeds either of these limits.
Available Options
DEVICE
TSL2560
TSL2560
TSL2560
TSL2560
TSL2561
TSL2561
TSL2561
TSL2561
INTERFACE
SMBus
SMBus
SMBus
SMBus
I
2
C
I
2
C
I
2
C
I
2
C
PACKAGE − LEADS
Chipscale
TMB-6
Dual Flat No-Lead − 6
ChipLED-6
Chipscale
TMB-6
Dual Flat No-Lead − 6
ChipLED-6
PACKAGE DESIGNATOR
CS
T
FN
CL
CS
T
FN
CL
ORDERING NUMBER
TSL2560CS
TSL2560T
TSL2560FN
TSL2560CL
TSL2561CS
TSL2561T
TSL2561FN
TSL2561CL
Copyright
E
2009, TAOS Inc.
r
r
The
LUMENOLOGY
r
Company
2
www.taosinc.com
TSL2560, TSL2561
LIGHT-TO-DIGITAL CONVERTER
TAOS059N − MARCH 2009
Terminal Functions
TERMINAL
NAME
ADDR SEL
GND
INT
SCL
SDA
V
DD
CS, T, FN
PKG
NO.
2
3
5
4
6
1
CL
PKG
NO.
3
2
6
4
5
1
O
I
I/O
TYPE
DESCRIPTION
I
SMBus device select — three-state
Power supply ground. All voltages are referenced to GND.
Level or SMB Alert interrupt — open drain.
SMBus serial clock input terminal — clock signal for SMBus serial data.
SMBus serial data I/O terminal — serial data I/O for SMBus.
Supply voltage.
Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted)
†
Supply voltage, V
DD
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8 V
Digital output voltage range, V
O
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 3.8 V
Digital output current, I
O
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −1 mA to 20 mA
Storage temperature range, T
stg
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 85°C
ESD tolerance, human body model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 V
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltages are with respect to GND.
Recommended Operating Conditions
MIN
Supply voltage, V
DD
Operating free-air temperature, T
A
SCL, SDA input low voltage, V
IL
SCL, SDA input high voltage, V
IH
2.7
−30
−0.5
2.1
NOM
3
MAX
3.6
70
0.8
3.6
UNIT
V
°C
V
V
Electrical Characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
Active
I
DD
V
OL
I
LEAK
Supply current
INT,
INT SDA output low voltage
Leakage current
Power down
3 mA sink current
6 mA sink current
0
0
−5
TEST CONDITIONS
MIN
TYP
0.24
3.2
MAX
0.6
15
0.4
0.6
5
UNIT
mA
μA
V
V
μA
The
LUMENOLOGY
r
Company
r
r
www.taosinc.com
Copyright
E
2009, TAOS Inc.
3
TSL2560, TSL2561
LIGHT-TO-DIGITAL CONVERTER
TAOS059N − MARCH 2009
Operating Characteristics, High Gain (16), V
DD
= 3 V, T
A
= 255C, (unless otherwise noted) (see
Notes 2, 3, 4, 5)
PARAMETER
f
osc
Oscillator frequency
Ch0
Dark ADC count value
E
e
= 0 T
int
= 402 ms
0,
T
int
> 178 ms
Full scale ADC count
value (Note 6)
T
int
= 101 ms
T
int
= 13.7 ms
13 7
λ
p
= 640 nm, T
int
= 101 ms
E
e
= 36.3
μW/cm
2
λ
p
= 940 nm, T
int
= 101 ms
E
e
= 119
μW/cm
2
ADC count value
λ
p
= 640 nm, T
int
= 101 ms
E
e
= 41
μW/cm
2
λ
p
= 940 nm, T
int
= 101 ms
E
e
= 135
μW/cm
2
ADC count value ratio:
t l
ti
Ch1/Ch0
λ
p
= 640 nm T
int
= 101 ms
nm,
λ
p
= 940 nm T
int
= 101 ms
nm,
λ
p
= 640 nm T
int
= 101 ms
nm,
R
e
Irradiance responsivity
λ
p
= 940 nm T
int
= 101 ms
nm,
Fluorescent light source:
T
int
= 402 ms
R
v
Illuminance responsivity
Incandescent light source:
T
int
= 402 ms
ADC count value ratio:
Ch1/Ch0
Fluorescent light source:
T
int
= 402 ms
Incandescent light source:
T
int
= 402 ms
Fluorescent light source:
T
int
= 402 ms
Incandescent light source:
T
int
= 402 ms
Fluorescent light source:
T
int
= 402 ms
Incandescent light source:
T
int
= 402 ms
Ch0
Ch1
Ch0
Ch1
0.65
0.60
Ch0
Ch1
Ch0
Ch1
Ch0
Ch1
Ch0
Ch1
Ch1
Ch0
Ch1
Ch0
Ch1
Ch0
Ch1
Ch0
Ch1
Ch0
Ch1
Ch0
Ch1
Ch0
Ch1
0.15
0 15
0.69
0 69
0.20
0 20
0.82
0 82
27.5
5.5
8.4
6.9
36
4
144
72
0.11
0.5
05
2.3
0.25
9
4.5
1
1
1.35
1.40
0.65
0.60
0.25
0 25
0.95
0 95
0.14
0 14
0.70
0 70
700
700
750
1000
200
1000
820
750
1000
190
1000
850
0.19
0 19
0.85
0 85
24.4
4.6
7.4
6.3
35
3.8
129
67
0.11
0.52
0 52
2.2
0.24
8.1
4.2
1
1
1.35
1.40
counts/
lux
counts/
lux
counts/
(μW/
cm
2
)
0.24
0 24
1
1300
counts
1250
1300
counts
TEST CONDITIONS
CHANNEL
TSL2560T, FN, & CL
TSL2561T, FN & CL
MIN
690
0
0
TYP
735
MAX
780
4
4
65535
65535
37177
37177
5047
5047
1250
TSL2560CS, TSL2561CS
MIN
690
0
0
TYP
735
MAX
780
4
4
65535
65535
37177
37177
5047
5047
counts
counts
kHz
UNIT
R
v
Illuminance responsivity,
low gain mode (Note 7)
(Sensor Lux) /
(actual Lux) high gain
Lux),
mode (Note 8)
Copyright
E
2009, TAOS Inc.
r
r
The
LUMENOLOGY
r
Company
4
www.taosinc.com
TSL2560, TSL2561
LIGHT-TO-DIGITAL CONVERTER
TAOS059N − MARCH 2009
NOTES: 2. Optical measurements are made using small-angle incident radiation from light-emitting diode optical sources. Visible 640 nm LEDs
and infrared 940 nm LEDs are used for final product testing for compatibility with high-volume production.
3. The 640 nm irradiance E
e
is supplied by an AlInGaP light-emitting diode with the following characteristics: peak wavelength
λp
= 640 nm and spectral halfwidth
Δλ½
= 17 nm.
4. The 940 nm irradiance E
e
is supplied by a GaAs light-emitting diode with the following characteristics: peak wavelength
λp
= 940 nm and spectral halfwidth
Δλ½
= 40 nm.
5. Integration time T
int
, is dependent on internal oscillator frequency (f
osc
) and on the integration field value in the timing register as
described in the
Register Set
section. For nominal f
osc
= 735 kHz, nominal T
int
= (number of clock cycles)/f
osc
.
Field value 00: T
int
= (11
×
918)/f
osc
= 13.7 ms
Field value 01: T
int
= (81
×
918)/f
osc
= 101 ms
Field value 10: T
int
= (322
×
918)/f
osc
= 402 ms
Scaling between integration times vary proportionally as follows: 11/322 = 0.034 (field value 00), 81/322 = 0.252 (field value 01),
and 322/322 = 1 (field value 10).
6. Full scale ADC count value is limited by the fact that there is a maximum of one count per two oscillator frequency periods and also
by a 2-count offset.
Full scale ADC count value = ((number of clock cycles)/2 − 2)
Field value 00: Full scale ADC count value = ((11
×
918)/2 − 2) = 5047
Field value 01: Full scale ADC count value = ((81
×
918)/2 − 2) = 37177
Field value 10: Full scale ADC count value = 65535, which is limited by 16 bit register. This full scale ADC count value is reached
for 131074 clock cycles, which occurs for T
int
= 178 ms for nominal f
osc
= 735 kHz.
7. Low gain mode has 16
y
lower gain than high gain mode: (1/16 = 0.0625).
8. The sensor Lux is calculated using the empirical formula shown on p. 22 of this data sheet based on measured Ch0 and Ch1 ADC
count values for the light source specified. Actual Lux is obtained with a commercial luxmeter. The range of the (sensor Lux) / (actual
Lux) ratio is estimated based on the variation of the 640 nm and 940 nm optical parameters. Devices are not 100% tested with
fluorescent or incandescent light sources.
The
LUMENOLOGY
r
Company
r
r
www.taosinc.com
Copyright
E
2009, TAOS Inc.
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
