MW155
• 100-240 VAC Universal Input
• PFC Corrected
• Low Life-Cycle Operation Cost
• Desktop Style
• Complies with EMI/RFI Regulations
120 Watt Medical Adapter Series
• CE compliant (LVD, EMC, WEEE, RoHS)
• Impact Resistant, Non-vented Polycarbonate Enclosure
• IPX1 Compliant
• Modified and Custom Designs also Available
• eets ENERGY STAR Criteria Level IV and
M
EISA Requirements — see reverse side for details
International Safety Standard Approvals
Specifications
Output Specifications
Line and Load
Voltage Regulation
Ripple
Transient Response
Excluding Cord
±1%
1% Vp-p max.
5
ms max. for 50% load
change, slew rate of
0.1A/µs
C
ycle-by-cycle current
limiting, automatic
recovery for overload or
short circuit; active latch-
off OTP; active latch-off
OVP
Environmental Specifications
Thermal Performance Operating Temperature 0° C to 40° C
with no Derating
Cooling
Relative Humidity
Altitude
Storage Temp
Convectional
Non-condensing
Non-ventilated Enclosure
5% to 95%
0-10,000 feet
-20° C to +85° C
Protection
General Specifications
Topology
Efficiency
Certifications
Hold-up Time
MTBF
Weight
Case and Dimension
Case Material
Cord
T
wo stage power conver-
sion, current-mode control
Energy Star Level IV
U
L60601-1, TUV-EN60601-1,
IEC 60601-1
1
6.7ms min.
200,000 Hours
24 oz (684 g)
6.6L X 3.2W X 1.6H (in)
167L X 82W X 40H (mm)
9
4V-0 Polycarbonate, Black
6
ft (1.8m), 4-conductor,
18AWG standard
Input Specifications
Voltage
Line Frequency
Input Current
Protection
100-240VAC nominal
47-63Hz
2.0A max.
Input fuse
SL Power Electronics Corp
•
6050 King Drive
•
Ventura, CA 93003
•
Phone:805.486.4565
•
Fax:805.487.8911
•
Email:info@slpower.com
•
www.slpower.com
MW155
Ault Part Number
MW155RA1251F01
MW155RA1551F01
MW155RA1851F01
MW155RA2451F01
120 Watt Medical Adapter Series
For the most current data and application support visit www.slpower.com
Output
Voltage
12 V
15 V
18 V
24 V
Output Currents
Min
0.00 A
0.00 A
0.00 A
0.00 A
Max
9.17 A
7.33 A
6.67 A
5.00 A
Max
Watts
110.0 W*
110.0 W
120.0 W
120.0 W
*12V model rated 100W with input voltages rated 100-110VAC, 110W with input voltages rated 110VAC-240VAC
Ault Part Number Key
MW155
Product
Family
Name
R
Manufacturing
Location
A
Type
Revision
24
Output
Voltage
51
Output
Connector
Style
F
Input
Connector
Style
01
Standard Item
(other numbers
for custom)
General Specifications (continued from p. 1)
EMI Compliance
EN55011 and FCC conducted and radiated Class B
IEC 61000-3-2 Class D
IEC 61000-4-2 (ESD), CD level 2 and AD level 3, criterion B
IEC 61000-4-3 (RFS), level 2, criterion A
IEC 61000-4-4 (EFT), level 2, criterion A
IEC 61000-4-5 (Surge), level 3, criterion B
Output Connectors
Input Connectors
Ault #51 Minifit over molded connector standard
IEC320
w/ground
C14
(F)
IEC320
w/o ground
C18
(Q)
N. America/
Japan
(B)
Europe
(M)
United
Kingdom
(G)
Australian
(E)
Shaver
C8
(N)
2007 Energy Independence and Security Act – EISA
T
he Energy Independence and Security Act of 2007 was passed in December of
2007 and addresses minimum efficiency standards and standby levels for Class
A external power supplies that are 250 watts and under. This law stipulates
that external power supplies manufactured on July 1, 2008 and beyond meet
certain minimum efficiency and standby criteria as defined below.
Minimum Efficiency Criteria
A
ctive mode is defined as when a power supply’s input is connected to line
voltage AC and its output is connected to a DC or AC load drawing a portion
of the product’s power output. Depending on the power rating for the power
supply, it must meet the minimum efficiency criteria outlined below.
E
nergy-Efficiency Criteria for Active Mode:
output power on
minimum average
adapter label
efficiency percentage
≥ 0.50 * output power on adapter label
0 to ≤ less than 1 watt
≥ [0.09 * Ln (output power on adapter
> 1 to ≤ 51 watts
label )] + 0.50
≥ 0.85
> 51 watts
T
he power supply must also meet a requirement for when its input is
connected to a line voltage AC but its output is not connected to a load.
Depending on the power output of the supply, it must keep its energy
consumption below the following values.
Energy Consumption Criteria for No Load Mode:
output power on
maximum power consumption
adapter label
in no-load mode
≤ 0.5 watts
0 to < 250 watts
Optional Features
V
arious output cord wire gauges and connector styles available. See Ault
connector style sheets for connector options
“Power-on” LED
Active, Latch-off over temperature protection circuit
Synchronous rectification
Private label marking
SL Power Electronics Corp
•
6050 King Drive
•
Ventura, CA 93003
•
Phone:805.486.4565
•
Fax:805.487.8911
•
Email:info@slpower.com
•
www.slpower.com
Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication.
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
Rev.6/9/08
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
