the termination characteristics of the SCAATAS family of products
which provideswhich provides
for direct blind mate interconnection of disk drives to backplanes. both
plug and receptacle of the Serial-ATA connector series, with Tin/Lead plated terminals. A new product
specification for Serial-ATA connector series, with Lead-free plated terminal shall be stated otherwise.
3.0
GENERAL
Formatted:
Bullets and Numbering
Copyright FCI This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document
may be used in any way without the written consent of FCI Electronics.
This document is composed of the following sections:
Paragraph
1.0
2.0
3.0
4.0
5.0
5.1
5.2
5.3
5.4
6.0
7.0
8.0
9.0
9.1
9.2
9.3
9.4
9.5
9.6
FIGURE 1TABLE 1
FIGURE 2
FIGURE 3
Title
OBJECTIVE
SCOPE
GENERAL
APPLICABLE DOCUMENTS
REQUIREMENTS
Qualification
Material
Finish
Design and Construction
ELECTRICAL CHARACTERISTICS
MECHANICAL CHARACTERISTICS
ENVIRONMENTAL CHARACTERISTICS
QUALITY ASSURANCE PROVISIONS
Equipment Calibration
Inspection Conditions
Sample Quantity and Description
Acceptance
Qualification Testing
Re-qualification Testing
QUALIFICATION TESTING MATRIX
METHOD OF CONTACT RESISTANCE MEASUREMENT
INSERTION/ WITHDRAWAL TEST GAGE
Formatted:
Indent: First line: 0.04"
Formatted:
Indent: Left: 0.75", Hanging:
1.02", Outline numbered + Level: 1 +
Numbering Style: 1, 2, 3, … + Start at: 1 +
Alignment: Left + Aligned at: 2.11" + Tab
after: 3.13" + Indent at: 3.13"
Formatted:
Indent: Left: 0.75"
Formatted:
Indent: Left: 0.59", First line:
0.04"
Formatted:
Indent: Left: 0.63", First line:
0.04"
Formatted:
Indent: Left: 0.67", First line:
0.04"
Copyright FCI This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document
may be used in any way without the written consent of FCI Electronics.
Test Methods for Electronic Components, Lead-Free Soldering
Part Design Standards
Copyright FCI This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document
may be used in any way without the written consent of FCI Electronics.
Copyright FCI This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document
may be used in any way without the written consent of FCI Electronics.
Connectors furnished under this specification shall be capable of meeting the qualification test
requirements specified
herein.
Unless otherwise specified, all measurements shall be performed
within the following lab conditions ;
in the following clauses. As general, connectors furnished under this specification shall meet
functional requirements under operating conditions specified herein:
Temperature : 15 to 35°C
Relative Humidity : 20% to 80%
Atmospheric Pressure : 650mm to 800mm of Hg (86 ~106Kpa)
Temperature: 15°C ~ 35°C
Relative Humidity: 20 ~ 80%
Atmospheric Pressure: 86 ~ 106kPa (equivalent to 650 ~ 800mmHg)
5.2
Material
Material for each part shall be specified herein, or equivalent. Substitute material shall meet the
performance requirements of this specification.
5.2.1
Receptacle Terminal
.
.-
The base material shall be
C51000
/C5210phosphor-bronze
Formatted:
Bullets and Numbering
strip
or equivalent.
5.2.2
Plug Terminal..
-
The base material shall be
C51000 phosphor bronze2600/C2680 brass
or equivalent5100
phosphor-bronze.
5.2.3
Plug and Receptacle Insulator Housings.
.
-
The insulators for the
plug
connectors and
receptacle connectors
shall be molded of
liquid crystal polymer (LCP)glass filled high
performance polyplastic
that is rated UL94V-0 or better in accordance with UL-94.
See
applicable product drawing for material.The insulator for the receptacle connector shall
be molded of a High Temperature Nylon (HTN) or LCP that is rated UL94V-0 or better in
accordance with UL-94. See applicable product drawing for material.
Plug
ESD ClipClipHold-down
Terminal.
–
The base material shall be
C51000 phosphor
Formatted:
No underline
5.2.4
bronze.C2600/C2680 brass or equivalent.
Copyright FCI This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document
may be used in any way without the written consent of FCI Electronics.
据外媒报道，萨里大学（University of Surrey）的研究人员开发出一种无需依赖GPS即可在人口密集的城市地区精确定位设备位置的人工智能系统。该系统可将定位误差从734米缩小到22米以内，这对于自动驾驶汽车和救援车辆等技术的发展意义重大。 图片来源： 萨里大学 在发表于《IEEE Robotics and Automation Letters》的论文中，研究人员介绍了PEn...[详细]
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
