3
*
ST Connectors and Accessories
1
The 3M™ ST* Connector product line provides high
repeatability and low light loss for premises, LAN and telco
applications. The improved connector design is compatible
with the AT&T ST* connector product line as well as
Systimax* components and other ST* connector products.
The 3M products are supplied with a high quality PC
finish on zirconia ceramic ferrules.
3
Crimplok™ ST* Connector, Bayonet
Multimode/Single-mode
2
Hot Melt ST* Connector, Bayonet
Multimode/Single-mode
The 3M™ Hot Melt ST* Fiber Optic Connector is a keyed
bayonet-style multimode/single-mode connector, which
incorporates 3M’s hot melt adhesive and pre-radiused PC
zirconia ceramic ferrule technologies. The result is a quick
mount fiber optic connector that delivers low light loss, solid
intermateability and mechanical stability, while costing less
to install.
ST* Hot Melt Bayonet Connector for
Multimode/Single-mode
Features
Pre-loaded Hot Melt adhesive
The 3M™ Crimplok™ ST* Connector multimode/single-
mode connector combines the speed of non-adhesive
connectors with the performance characteristics of epoxy
and hot melt connectors. Crimplok connectors are the ideal
solution for emergency restoration work or for quickly
making fiber connections at the desk. Their time-saving
features are also valuable in larger network applications
where average installation time is less than 2 minutes per
connector. Crimplok connectors are faster to install than
epoxy connectors since there is no set-up or curing time.
And Crimplok connectors do not require special heating
tools or ovens, so time spent searching for electrical outlets
is eliminated. The Crimplok connector is ideal for fiber-to-
the-desk and other applications where a few connectors are
installed at a time.
Benefits
No epoxy to mix; no syringe
needed; shorter set-up time;
fewer consumables; no shelf life;
no mess; no waste
Short heat and cool cycle; saves
time
Eliminates outdated epoxy
inventory and stock rotation
requirements
Fewer tools; saves time
Assured contact of fibers;
consistent performance
Durability; stability through
temperature change; quality
performance
Ability to reterminate with same
connector; saves time and money
Crimplok ST* Connectors
Features
Non-adhesive design
No set-up required
No electricity required
Meets TIA-568 specifications
Benefits
Clean and simple terminations
Saves time and money
Installation anywhere
Rugged, reliable performance
Fast cure time
Unlimited adhesive shelf life
No crimping required
Pre-radiused PC ferrule
Zirconia ceramic ferrule
6
5
2
1
4
3
7
Re-usable Connector
ST* Connector
1. Dust cap
2. Ferrule
3. Backbone
4. BAYONET
5. Spring
6. C-Ring
7. Boot
ST* Connector, Epoxy Bayonet Multimode/
Single-mode
The Epoxy ST* Connector is bayonet style for quick
interconnect and high repeatability.
ST* Epoxy Bayonet Connector for
Multimode/Single-mode
Features
Bayonet design
Keyed connector
Pre-radiused PC ferrule
Zirconia ceramic ferrule
Benefits
Quick interconnect
Assures high repeatability
Assures contact of fibers; low
reflection, consistent performance
Durability; stability through
temperature change; quality
performance
4
Specifications for ST* Bayonet Connectors
Hot Melt Bayonet
Multimode
Single-mode
Product number
Connector type
Fiber size µm
Attenuation (dB)
@ 1300 nm field mount
Reflection (dB)
field mount
Connector durability (dB)
500 matings
Operating temperature
Storage temperature
Material
Connector ferrule
Connector housing
Boot
Flame retardancy
Identification
Crimplok
Multimode
Single-mode
6901
Crimplok
125
<0.2 typical
<-25 typical
<0.3 change
-10° to 60°C
(-14° to 140°F)
-40° to 85°C
(-40° to 185°F)
Epoxy Bayonet
Multimode
Single-mode
6105
Epoxy
125
<0.2 typical
(62.5/125 µm fiber)
≤-25
typical
<0.2 change/
1000 matings
-40° to 80°C
(-40° to 176°F)
-40° to 85°C
(-40° to 185°F)
Zirconia ceramic
Nickle plated zinc
UL-94 V-0
Black backbone
126
6100
Hot Melt
125
<0.2 typical
(62.5/125 µm fiber)
<-25 typical
<0.2 change
-40° to 60°C
(-40° to 140°F)
-40° to 85°C
(-40° to 185°F)
Zirconia ceramic
Nickle plated zinc
UL-94 V-0
Blue dot on end of
ferrule, white boot
8100YS
Hot Melt
126
0.2 typical
(62.5/125 µm fiber)
-30 typical
<0.2 change
-40° to 60°C
(-40° to 140°F)
-40° to 85°C
(-40° to 185°F)
Zirconia ceramic
Nickle plated zinc
UL-94 V-0
Blue dot on
end of ferrule,
yellow boot
6355 HM
6351 HM
8901
Crimplok
126
<0.2 typical
(62.5/125 µm fiber)
-40 typical
<0.3 change
-10° to 60°C
(-14° to 140°F)
-40° to 85°C
(-40° to 185°F)
8106
8107
Epoxy
127
0.3 typical
(62.5/125 µm fiber)
≤-45
typical
<0.2 change
-40° to 80°C
(-40° to 176°F)
-40° to 85°C
(-40° to 185°F)
Zirconia ceramic
Nickle plated zinc
Thermoplastic elastomer
Zirconia ceramic
Zirconia ceramic
Thermoplastic polymer Thermoplastic polymer
UL-94 V-0
Black body
beige shell
grey boot
6955
(no power needed)
Thermoplastic elastomer Thermoplastic elastomer
Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer
UL-94 V-0
Black body
beige shell
blue boot
6955
UL-94 V-0
Silver backbone
Field Termination Kit
120V
230V
6355 HM
6351 HM
8365
8361
8365
8361
Connector Accessories
Couplings
3M Couplings are compatible with Hot Melt, Bayonet, and
Crimplok™ connectors and cable assemblies from 3M, as
well as other major ST* connector vendors. These single-
mode and multimode couplings are available in threaded or
simplex housings, and a duplex coupling with 0.5" industry
standard spacing. The duplex threaded coupling is mounted
on the panel with a single nut and provides high density
capability.
5
Specifications for ST* Couplings
Multimode
Product Number
Description
Single-mode
8113
Duplex
Threaded
Coupling
6112
Threaded
Coupling
6113
Duplex
Threaded
Coupling
8119
Threaded
Coupling
Operating temperature
Material
Housing
Sleeve
-40° to 85°C (-40° to 185°F)
Nickel plated zinc
Beryllium copper
-40° to 85°C (-40° to 185°F)
Nickel plated zinc
Zirconia ceramic
One-Step Polishing Machine
The 6850 One-Step Polishing Machine features a dry,
single-paper technology for polishing the ferrule of a single
Hot Melt Connector. It is a 12-volt DC unit that provides
hands-free operation and delivers consistent performance.
Because no wet paper is used, no water is necessary and no
clean up is required.
3M also offers connector termination kits utilizing the
one-step polishing procedure for a variety of Hot Melt
Connectors. The 6355 and 6351 Termination Kits contain all
materials necessary to terminate Hot Melt Bayonet
Connectors (compatible with the ST* Connector). The 3M
polishing machine includes the polishing unit, 110-volt AC
to 12-volt DC converter, and 100 sheets of polishing film.
There are also adapters to polish FC and SC connectors.
6
Specifications for One-Step Polishing Machine
Size H x W x D cm (in.)
13.2 x 19.1 x 12.7 (5.2 x 7.5 x 5.0)
Weight kg (lbs.)
Net: 2.2 (4.9)
Shipping: 3.2 (7.0)
Ordering Information
Product Name
Multimode Connectors
6100-W Hot Melt Bayonet ST* Connector MM, 125 um, white boot
6100-R Hot Melt Bayonet ST* Connector MM, red boot
6100-B Hot Melt Bayonet ST* Connector MM, black boot
6105-B Bayonet ST* Connector MM, 125 um Epoxy, black boot
6901 Crimplok™ MM ST* Connector
6100-W5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, white boot
6100-R5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, red boot
6100-B5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, black boot
6100-W1K Hot Melt Bayonet ST* Connector MM, 125 um, white boot, 1,000 Bulk
6100-R1K Hot Melt Bayonet ST* Connector MM, 125 um, red boot, 1,000 Bulk
6100-B1K Hot Melt Bayonet ST* Connector MM, 125 um, black boot, 1,000 Bulk
6105-R Bayonet ST* Connector MM, 125 um Epoxy, red boot
6105-B1K Bayonet ST* Connector MM, 125 um Epoxy, black boot, 1,000 Bulk
6105-R1K Bayonet ST* Connector MM, 125 um Epoxy, red boot, 1,000 Bulk
6105-B10K Bayonet ST* Connector MM, 125 um Epoxy, black boot, 10,000 Bulk
6105-R10K Bayonet ST* Connector MM, 125 um Epoxy, red boot, 10,000 Bulk
Multimode Couplings
6112 ST* Coupling MM, Threaded
6113 ST* Coupling MM Duplex, Threaded
6112-1K ST* Coupling MM Threaded 1,000 Bulk
Single-mode Connectors
8100YS Hot Melt Bayonet ST* Connector SM
8106 ST* Bayonet Connector SM 126 µm, epoxy
8107 ST* Bayonet Connector SM 127 µm, epoxy
8901 Crimplok™ SM ST* Connector
8106-Y1K ST* Bayonet Connector SM 126 um, Epoxy 1,000 Bulk
Single-mode Couplings
8113 Coupling SM Duplex, Threaded
8119 Coupling SM, Threaded
Accessories
6192-A One Step Hot Melt Polishing Film (50 sheets/pkg.)
6192-B Polishing Film for 6850 One Step Polishing Machine
08-00882 Metal polishing jig available separate from kits
6192-AA Single-mode Hot Melt Polishing Film (.05µm) (50 sheets/pkg.)
SM Lapping film for Crimplok, 80-6110-1312-1 (50 sheets/pkg.)
One Step Crimplok Polishing Film, 80-6108-4532-5 (50 sheets/pkg.)
ST-B ST* Boot Bulk Pack, Black
ST-R ST* Boot Bulk Pack, Red
ST-U ST* Boot Bulk Pack, Blue
Polishing Machines/Portable Heaters
6850-A Polishing Machine with 110V converter, one step
Terminating Kits
6355 HM Hot Melt Termination Kit 120V for all Hot Melt Connectors
6351 HM Hot Melt Termination Kit 230V for all Hot Melt Connectors
6955 Universal Crimplok Termination Kit for all Crimplok Connectors
8361 ST*/FC/SC Universal Kit 230V (epoxy) for ST* Bayonet, SC and FC style connectors
8365 ST*/FC/SC Universal Kit 120V (epoxy) for ST* Bayonet, SC and FC style connectors
Shipping Unit
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
60/cs.
1 each
1 each
1 pkg.
1 pkg.
(50 sheets/pkg.)
1 each
1 pkg.
1 pkg.
1 pkg.
500/cs
500/cs
500/cs
1/cs.
1
1
1
1
1
kit
kit
kit
kit
kit
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
