Wiha Quality Tools
106
Go To
Image Index
Go To
Numerical Index
Toll Free: (800) 494-6104
Wiha Insulated Pliers & Cutters
Insulated High Leverage Diagonal Cutters
328
High Leverage Diagonal Cutters. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E,
up to 1000 volt. Individually Tested. DIN ISO 5749
Semi-circular. Low wear lap joint, riveted and able to withstand high
levels of load. Lightweight action, clean cutting. Long term cutting is
achieved through additional inductive hardening to approx. 64 HRC.
C 60 special tool steel hardened and tempered to high quality. For soft,
hard and piano wire, lay-on joint, optimized power transmission.
Item
No.
328 35
Z16016006
328 36
Z16018006
328 38
Z16020006
mm
160
180
200
Inch
6.3
7.0
8.0
Cutting Capacity
Copper AWG
1000volt
SHOP
#6
#5
#4
Pkg.
1
1
1
wt.
.54
.57
.64
Insulated Electrician’s Diagonal Cutters
328
Diagonal Cutters W/Stripping Holes. Insulation According
to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E,
up to 1000 volt. Individually Tested.
Drop-forged from special tool steel, cutters additionally induction
hardened (approx. 60 HRC), chrome-nickel plated, mirror-polished.
Ergonomic comfort grip with slip guard. Holes in the cutting edge for
stripping copper wire of Ø 1.5 and 2.5. Strips AWG sizes #10 & #14.
Item
No.
328 61
Z14016006
mm
160
Inch
6.3
Cutting Capacity
Copper AWG
Pkg. wt.
1000volt
I
N
D
E
X
SHOP
#6
1
.54
Insulated Cable Cutters
Cable Cutters. Insulation According to VDE 0682/part 201,
EN/IEC 60900, ASTM F-1505-01, NFPA70E,
up to 1000 volt.
Individually Tested.
Drop-forged from durable CV steel, cutters
additionally induction hardened, chrome & nickel plated, Mirror-polished.
For copper and aluminum cables (not for steel wires), integrated release
spring, one-hand locking, adjustable joint, anti-squeeze feature.
Item
No.
328 46
Z50023006
328 48
Z50017006
mm
210
170
Inch
8.3
6.5
Min
mm
17
10
Max
mm Pkg.
40 1
60 1
wt.
.98
.67
328
SHOP
1000volt
Insulated Long Nose Pliers
328
Long Nose Pliers With Cutters. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E,
up to 1000 volt. Individually Tested.
Drop-forged from special tool
steel, cutters additionally induction hardened (approx. 60 HRC), chrome-
nickel plated, mirror-polished, ergonomic comfort grip with slip guard,
half-round jaws, serrated gripping surface.
Item
No.
328 06
Z05016006
328 08
Z05020006
mm
160
200
Inch
6.3
8.0
Cutting Capacity
Copper AWG
Pkg. wt.
1000volt
SHOP
Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation
Inspect insulation prior to each use of any insulated tool
If you doubt the integrity of the insulation destroy the tool or have it retested
Use insulated tools where the ambient temperature is between -20 to +70
O
C
Have a qualified safety technician inspect and re-certify tools annually for safe use
#10
#8
1
1
.32
.42
Warning!
Insulated tools are not intended for use on live or energized circuits. Always disconnect
and de-energize all equipment & circuits.
NEVER!
work on live or energized circuits or equipment.
PREVIOUS
NEXT
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
