H
PVC-single cores, single wire, VDE 0281 approved
H07V-U coil 1x1,5 mm² BK Part no. 28785
Technical data
PVC single cores to
DIN VDE 0285-525-2-31/
DIN EN 50525-2-31 and IEC 60227-3
Temperature range
flexing -5°C to +70°C
fixed installation -30°C to +80°C
Nominal voltage
U
0
/U 450/750 V
Test voltage
2500 V
Insulation resistance
min. 10 MOhm x km
Minimum bending radius
fixed installation
core Ø ≤ 8 mm: 4x core Ø
core Ø > 8-1 2 mm: 5x core Ø
core Ø > 12 mm: 6x core Ø
Radiation resistance
up to 80x10
6
cJ/kg (up to 80 Mrad)
Cable structure
Bare copper conductor, to
DIN VDE 0295 cl.5, fine wire,
BS 6360 cl.5, IEC 60228 cl.5
Core insulation of PVC
compound type TI1 to
DIN VDE 0207-363-3 / DIN EN 50363-3
and IEC 60227-3
Core identification: see table below
Note
The following colours are recommended
(only single colour): black, white, blue, grey,
brown, red, orange, turquoise, violet and
pink. Two-coloured combinations are not
allowed, with exceptions of green-yellow.
Colours yellow, green, transparent only in
(H)07V-K available.
Two-coloured combination is only
permitted for (H)07V-K.
Application
These single cores are suitable for laying in tubes, under and surface mounting of plasters and also in closed installation
conduits. These are not allowed to install for direct laying on cable trays, channels or tanks. These types are permitted for the
inner wiring of equipment, distributor and switchboards and also for protective laying to the lightings with a nominal voltage up
to 1000 V alternating current or up to 750 V direct current against earth.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.
Downloads
Data sheet
Certificate of compliance
淘e淘
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
