Optoway
BTR-7640G / BTR-7640-SPG
FEATURES
l
l
l
l
l
l
l
l
l
l
l
l
l
l
BTR-7640G
1
***********************************************************************************************************************************************************************
1310 nm TX / 1550 nm RX , 3.3V / 1.25 Gb/s
RoHS Compliant
Single-Fiber Transceiver
**********************************************************************************************************************************************************************
DESCRIPTION
Single Fiber Bi-Directional Transceiver
1310 nm DFB LD Transmitter
1550 nm Receiver
20 dB Link Power Budget At Least
Link distance up to 40 km
Industry Standard 1 x 9 Footprint
Single +3.3 V Power Supply
RoHS Compliant
0 to 70
o
C Operating
LVPECL Differential Inputs and Outputs
LVPECL Signal Detect Output: BTR-7640G
LVTTL Signal Detect Output: BTR-7640CG
Wave Solderable and Aqueous Washable
Class 1 Laser International Safety Standard IEC-60825
Compliant
The BTR-7640G series is high performance module for
single fiber communications by using 1310 nm transmitter
and 1550 nm receiver. The transmitter section uses a
multiple quantum well 1310 nm DFB laser and is a class 1
laser compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated 1550
nm detector preamplifier (IDP) mounted in an optical
header and a limiting post-amplifier IC. A PECL logic
interface simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l
WDM 1.25 Gb/s Links
l
SONET/SDH Equipment Interconnect
l
Fibre Channel 1.063 Gb/s Links
ORDER INFORMATION
P/No.
Bit
Rate
(Gb/s)
1.25
1.25
Distance
(km)
TX
(nm)
RX
(nm)
Voltage
(V)
Package
Temp
( C)
o
TX
Power
(dBm)
RX
Sens.
(dBm)
Signal
Detect
RoHS
Compliant
BTR-7640CG
BTR-7640G
40
40
1310DFB
1310DFB
1550
1550
3.3
3.3
1X9
1X9
0 to 70
0 to 70
2 to -3
2 to -3
-23
-23
TTL
PECL
Yes
Yes
Note: 1. BTR-XXXXX is 1X9 SC receptacle type package.
2. BTR-XXXXX-APBBB is 1X9 pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
0
GND
0
Max
85
70
260
4.5
Vcc
30
Units
o
C
o
C
o
C
V
V
mA
Notes
10 seconds on leads only
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Power Supply Current
Symbol
Vcc
Topr
Icc
Min
3.13
0
Typ
3.3
1250
Max
3.47
70
1300
280
Units
V
o
C
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V2.0
Optoway
Transmitter Specifications (0
o
C < Topr < 70
o
C, 3.13V < Vcc < 3.47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Total Jitter
Electrical
Data Input Current
–
Low
Data Input Current
–
High
Differential Input Voltage
Data Input Voltage
–
Low
Data Input Voltage -- High
Symbol
Min
Typ
---
---
---
Max
2
1360
1
---
0.26
0.26
-120
0.227
Units
dBm
nm
nm
dB
dB
ns
ns
dB/Hz
ns
µA
µA
mV
V
V
Po
-3
1260
λ
---
∆λ
SMSR
30
E
R
9.0
Compliant with IEEE 802.3z
t
r
t
f
RIN
TJ
I
IL
I
IH
V
IH
- V
IL
V
IL
- V
CC
V
IH
- V
CC
-350
350
300
-2.0
-1.1
-1.58
-0.74
BTR-7640G
Notes
1
-20 dB Width
2
**********************************************************************************************************************************************************************
20% to 80% Values
20% to 80% Values
2
3
3
Notes: 1. Output power is power coupled into a 9/125
µm
single mode fiber.
2. Measured with a 2
7
-1 PRBS.
3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
Receiver Specifications (0
o
C < Topr < 70
o
C, 3.13 V < Vcc < 3. 47V)
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Optical Return Loss
Electrical
Data Output Voltage
–
Low
Data Output Voltage
–
High
SD Output Voltage -- Low
SD Output Voltage -- High
SD Output Voltage -- Low
SD Output Voltage -- High
Symbol
---
Pin
Pa
Pd
Min
---
-3
---
-40
1.0
1480
14
-2.0
-1.1
-2.0
-1.1
0
2.0
Typ
---
---
---
---
Max
-23
---
-23
---
1580
Units
dBm
dBm
dBm
dBm
dB
nm
dB
V
V
V
V
V
V
Notes
1
Transition: low to high
Transition: high to low
2
ORL
V
OL
- V
CC
V
OH
- V
CC
V
OL
- V
CC
V
OH
- V
CC
V
OL
V
OH
-1.58
-0.74
-1.58
-0.74
0.8
Vcc+0.3
3
3
BTR-7640G
BTR-7640CG
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 2
7
-1 PRBS.
2. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm.
3. These outputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V2.0
Optoway
CONNECTION DIAGRAM
Receiver Signal Ground 1 (Rx GND)
Receiver Data Out 2 (RD+)
Receiver Data Out Bar 3 (RD−)
Signal Detect 4 (SD)
Receiver Power Supply 5 (Rx Vcc)
Transmitter Power Supply 6 (Tx Vcc)
Transmitter Data In Bar 7 (TD−)
Transmitter Data In 8 (TD+)
Transmitter Signal Ground 9 (Tx GND)
N/C
BTR-7640G
3
**********************************************************************************************************************************************************************
TOP VIEW
N/C
PIN
1
2
3
4
5
6
7
8
9
Symbol
Rx GND
RD+
RD−
SD
Rx Vcc
Tx Vcc
TD−
TD+
Tx GND
Notes
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
See recommended circuit schematic
Active high on this indicates a received optical signal
+3.3V dc power for the receiver section
+3.3V dc power for the transmitter section
See recommended circuit schematic
See recommended circuit schematic
Directly connect this plan to the trransmitter ground plane
RECOMMENDED CIRCUIT SCHEMATIC
Vcc3.3V
Vcc3.3V
Vcc3.3V
C9
100nF
C10
100nF
L2
1uH
U2
TXGND
TD+
TD-
TXVCC
RXVCC
SD
RD-
RD+
RXGND
BTR-77XX(C)/76XX(C)
9
8
7
6
5
4
3
2
1
C2
100nF
L1
1uH
PHY DEVICE
C3
100nF
C4
10uF
Vcc3.3V
R3
NA
R2
NA
MICROSTRIP5
Z=50R
MICROSTRIP6
Z=5OR
TD-
LVPECL
TD+
R4
NA
R1
NA
C1
100nF
C8
10uF
RD+
Vcc3.3V
C12
100nF
R21
1K
MICROSTRIP7
Z=50R
MICROSTRIP8
R14
100R
RD-
LVPECL
C11 100nF Z=5OR
SD / LVPECL
The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power
supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx
Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V2.0
Optoway
PACKAGE DIAGRAM
Units in mm
1) Pigtail Type
BTR-7640G
4
**********************************************************************************************************************************************************************
BTR-7640-SP50G
Note: Length L is 50± 3 cm. Other pigtail’s length is available upon request.
2) Receptacle Type
BTR-7640G
Note:
Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2005 V2.0
stm32/stm8
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
