Model 73104
Do-It-Yourself Insulated BNC (M) Connector, 50 Ohm
Features
BNC connector is insulated for increased electrical protection
Connector accepts RG 58, 58C, 141, 141A coaxial cable types
Materials
Center Conductor: Nickel-plated Brass, Gold-plated Brass, Annealed Copper, Tinned Copper
Insulation: Polypropylene
Ratings
Voltage: CAT II 1000V / CAT III 600V
Current: 3 amperes
Impedance: 50 Ohm
Operating Temperature: +5°C to +40°C (+41°F to 104°F)
Ordering Information
Model: 73104-color
Color:
0=Black, 2=Red, 6=Blue
DIY Insulated BNC (M) Connector, 50 Ohm
USA:
Sales: 800-490-2361
Technical Support:
technicalsupport@pomonatest.com
Fax: 425-446-5844
Europe:
31-(0) 40 2675 150
International:
425-446-5500
Where to Buy:
www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2019
D2134440 rev.101
Page 1 of 2
Model 73104
Do-It-Yourself Insulated BNC (M) Connector, 50 Ohm
Assembly Instructions
Step 1:
Gather the following items.
1. 5 BNC connector parts (front insulator, contact pin, main metal part with knurled area, crimping
ferrule, main insulator)
2. Crimping tool with crimp die cavity hex size of 0.213” (5.4mm)
3. Coaxial cable
4. 80 watt maximum soldering iron
5. A piece of tin wire
Step 2:
Slip the main insulator on the coaxial wire and slip the crimping ferrule on the coaxial wire.
Step 3:
Strip the coaxial wire as shown below.
Step 4:
Solder the pin on the inner conductor of the coaxial wire. Insert the pin into the main metal part by
holding the coaxial wire and push it unti it locks into place.
Step 5:
Lay the braiding on the knurled area of the main metal part. Slip the crimping ferrule on the
braiding. Crimp the crimping ferrule with crimping tool and die cavity hex size of 0.213” (5.4mm).
Step 6:
Assemble the front insulator with the main insulator by taking care of the indexing plastic pin. Push
until it locks into place.
The BNC male connector is ready to use.
USA:
Sales: 800-490-2361
Technical Support:
technicalsupport@pomonatest.com
Fax: 425-446-5844
Europe:
31-(0) 40 2675 150
International:
425-446-5500
Where to Buy:
www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2019
D2134440 rev.101
Page 2 of 2
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
