SURFACE MOUNT PIN GRID ARRAYS
For Standard .100” Spacing
Male Pin Header & Female Socket
•
Series 599 SMT PGA headers and Series 514 SMT PGA sockets are
assembled with MM pin# 9976, and receptacle# 1434 respectively.
Each floats vertically within the insulator to compensate for uneven
solder paste on the PCB. Typical example illustrated.
1) “Floating” pin SMT Headers using
machined epoxy insulator.
2) Detail of “Floating” pins which
compensate for unevenly
screened solder paste.
3) PQFP device
4) Translator board
5) Existing motherboard
Series 599, 514
Ordering Information
HEADER TYPE 9976
FOR PGA MALE PIN HEADER
1. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the part number will be located under the pattern.
Series
Plating
Code
Window
5 9 9
-
1 0
-
No. of pins
-
Grid size
-
Pattern #
4 7 6
Determined from footprint pattern pages 107 to 111
SPECIFY PLATING CODE XX=
10
10µ” Au
Pin Plating
SMT RECEPTACLE
TYPE 1434
FOR PGA FEMALE SOCKET
1. Specify 2-digit plating code from chart at bottom of page.
2. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the part number will be located under the pattern.
Series
Plating
Code
Window
5 1 4
-
-
No. of pins
-
Grid size
91
-
Pattern #
93
30µ” Au
0 3 4
Determined from footprint pattern pages 107 to 111
SPECIFY PLATING CODE XX=
Sleeve (Pin)
Contact (Clip)
200µ” Sn/Pb 200µ” Sn/Pb
10µ” Au
w w w. m i l l - m a x . c o m
102
516-922-6000
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
