D
IN
12
-Q
Q12 series
Ø12 mm panel mount LED indicators
DISTINCTIVE FEATURES
8 mm colored diffused epoxy lens or 8 mm water clear
super bright LEDs
2VDC - 220VAC
(2.8 x 0.8) solder lug/faston terminals, pins or (200mm long)
wire terminations
ENVIRONMENTAL SPECIFICATIONS
• IP67 sealing option (EN60529)
• Operating & Storage Temperature Range:
Rear plastic body:
-30 °C to +65° C ( –22 °F to +149 °F)
Rear epoxy body:
-40 °C to +85° C ( –40 °F to +185 °F)
GENERAL SPECIFICATIONS
• Max Reverse Voltage: 5 V
• Viewing Angle: 30–100° (dependant on model)
• Life Expectancy: 100,000 hours
• Torque: 4 cNm (dependent on option)
• Maximum panel thickness 7 mm
MATERIALS
• Plated brass bezel finished in bright chrome, black chrome or satin
grey and moulded polycarbonate rear body
MOUNTING
The company reserves the right to change specifications without notice.
All LED characteristics are dependent upon environmental conditions. Therefore published data
should be considered nominal and subject to variations.
1
LED INDICATORS
0
7-
-1
8
LED INDICATORS
Q12 series
Ø12 mm panel mount LED indicators
ELECTRICAL SPECIFICATIONS
STANDARD LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed
HE Red
Green
Yellow
Blue
White
Orange
Bi-color (Typical)
(Red/Green)
Tri-color (Typical)
(Red/Green/Yellow)
350 mcd
60 mcd
50 mcd
800 mcd
1,200 mcd
100 mcd
20/10 mcd
80/15/13 mcd
Flush
N/A
N/A
N/A
330 mcd
1.560 mcd
N/A
N/A
N/A
Forward Voltage
2.0 V
2.2 V
2.1 V
3.3 V (Flush : 3.1 V)
3.3 V (Flush : 3.1 V)
2.2 V
2.0 V/2.2 V
2.0 V/2.2 V/2.1 V
Voltage
Operating Voltage
(Min to Max)
Operating Current
(Typical All
Types)
20 mA max
20 mA
20 mA
20 mA
20 mA
6 mA
3 mA
02 (No Resistor)
6 VDC
12 VDC
24 VDC
28 VDC
110 VAC
220 VAC
1.8 to 3.3 VDC
5.4 to 6.6 VDC
10.8 to 13.2 VDC
21.6 to 26.4 VDC
25.2 to 30.8 VDC
99 to 121 VAC
207 to 235 VAC
* Customer to supply resistor for desired operating
current.
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is
produced.
SUPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed
HE Red
Green
Yellow
Blue
White
Orange
3,000 mcd
8,000 mcd
1,100 mcd
1,500mcd
1,200 mcd
2,000 mcd
Flush
N/A
N/A
N/A
N/A
N/A
N/A
Forward Voltage
2.2 V
3.3 V
2.0 V
3.3 V
3.3 V
2.2 V
HYPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed
HE Red
Green
Yellow
Orange
N/A
N/A
N/A
N/A
Flush
1,120 mcd
1,560 mcd
1,120 mcd
1,120 mcd
Forward Voltage
2.2 V
3.3 V
2.0 V
2.2 V
• The operating voltage must not be exceeded by more that
10% as this will result in reduced life expectancy
• Luminous intensity is measured at 20 mA on a discrete led
unless otherwise stated.
• Luminous intensities and color shades of white LEDs may
vary within a batch.
• Luminous intensity will be reduced with lower operating
current.
2
Q12 series
Ø12 mm panel mount LED indicators
BUILD YOUR PART NUMBER
PROMINENT AND RECESSED BEZEL
Q
SERIES
MOUNTING HOLE
BEZEL STYLE
TERMINALS
BEZEL FINISH
Rear epoxy Wires
Short body Pins
Short body Wires
12
Ø12 mm
P
R
Prominent
Recessed
1
2
3
4
Solder Lug/ Fastons
(2.8 x 0.8)
Pins
Wires
Rear epoxy Pins
5
6
7
C
B
G
Bright Chrome
Black Chrome
Satin Grey
TYPE OF ILLUMINATION
LED COLOR
VOLTAGE
SEALING
XX
KK
YY
ZZ
Fixed Light
Flashing Light
(12 V – 28 VDC)
Bi-color
Tri-color
R
G
Y
B
W
O
HR
Red
Green
Yellow
Blue
White
Orange
Hyper Bright
Red
HG
HY
HO
SR
SG
SY
SB
Hyper Bright
Green
Hyper Bright
Yellow
Hyper Bright
Orange
Super Bright
Red
Super Bright
Green
Super Bright
Yellow
Super Bright
Blue
SW
SO
RG
RY
GY
RYG
Super Bright
White
Super Bright
Orange
Red/Green
Red/Yellow
Green/Yellow
Red/Yellow/
Green
02
06
12
12A
24
24A
28
28A
110
220
no resistor*
6 VDC
12 VDC
12 VAC/DC
24 VDC
24 VAC/DC
28 VDC
28 VAC/DC
110 VAC
220 VAC
(Blank)
E
Unsealed
IP67
* please refer to the
forward voltage in
electrical
specifications
ABOUT THIS SERIES
Notice:
please note that not all combinations of above numbers are available.
• Gold faston terminal denotes anode (+), silver terminal denotes
cathode (-)
• Standard wire length is 200 mm, 22 AWG UL1061, red wire
denotes anode (+), black wire denotes cathode (-) for other wire
lengths consult APEM
• Bi-color leds, by connecting the gold faston (+) one color
is produced, by reversing the supply voltage another color is
produced – bi-colors are available up to 28 VDC
• 110 VAC and 220 VAC, short body terminal options, 5, 6 and 7
please consult the factory
• We recommend using Hyperbright or Superbright LEDs for use
at 110 VAC and 220 VAC
• The Tri-color LED has red and green LEDs when both are
connected yellow is produced
• Standard tri-color faston terminals are two anodes (+) and one
cathode (-)
• Take care when soldering to the faston terminals (recommended • Tri-color wires are one red (+) and one green (+) anode and one
solder temperature 300 °C - 3 sec)
black (-) cathode
• Max voltage for pins and wires is 28 V
• Tri-color pins are center (–) cathode, shortest (+) anode pin
• Tri-color are not available with terminal option 1 and behind
panel epoxy sealed with wires (option 4) or pins (option 5).
green, longest (+) anode pin red
3
LED INDICATORS
LED INDICATORS
Q12 series
Ø12 mm panel mount LED indicators
BUILD YOUR PART NUMBER
FLUSH BEZEL
Q
SERIES
MOUNTING HOLE
BEZEL STYLE
TERMINALS
BEZEL FINISH
12
Ø12 mm
F
Flush
1
4
5
Solder Lug/ Fastons
(2.8 x 0.8)
Rear epoxy Pins
Rear epoxy Wires
C
B
G
Bright Chrome
Black Chrome
Satin Grey
TYPE OF ILLUMINATION
LED COLOR
VOLTAGE
SEALING
XX
Fixed Light
HR
HG
HY
B
W
HO
Red
Green
Yellow
Blue
White
Orange
02
06
12
12A
24
24A
28
28A
110
220
no resistor*
6 VDC
12 VDC
12 VAC/DC
24 VDC
24 VAC/DC
28 VDC
28 VAC/DC
110 VAC
220 VAC
(Blank)
E
Unsealed
IP67
ABOUT THIS SERIES
Notice:
please note that not all combinations of above numbers are available.
• Gold faston terminal denotes anode (+), silver terminal denotes cathode (-)
• Standard wire length is 200 mm, 22 AWG UL1061, red wire denotes anode (+), black wire denotes cathode (-) for other wire lengths
consult APEM
• For leds with alternative voltages please consult Apem
• Take care when soldering to the faston terminals (recommended solder temperature 300 °C - 3 sec)
• Max voltage for pins and wires is 28 V.
• 110VAC and 220VAC only available with solder lug/Faston terminals
4
Q12 series
Ø12 mm panel mount LED indicators
PROMINENT BEZEL
SOLDER LUG/FASTON
WIRES
PINS
REAR EPOXY WIRES
REAR EPOXY PINS
SHORT BODY WIRES
SHORT BODY PINS
5
LED INDICATORS
汽车电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
