WIREMOLD
®
®
Pancake Overfloor Raceway
Steel Pancake Overfloor Raceway
Pancake
®
Overfloor Steel Raceway is ideal
for open space wiring of workstations and
desk areas in high traffic sites. Both the
1500 and 2600 Series Raceways mount
directly to the floor and provide safe load
bearing strength for normal office use.
Both raceway models offer a full
complement of fittings and device boxes for
power and communication wiring. Pancake
Overfloor Raceway comes unpainted with a
paintable galvanized finish.
®
Both 1500 and 2600 Series
Overfloor Raceway provide
solutions for bringing power
or communication services
to open space designs.
FEATURES & BENEFITS
n
Installs in open space areas.
Brings power or telephone
and signal wiring to away-from-wall locations.
n
Flat profile.
Unobtrusive, low-profile appearance.
n
Galvanized steel.
Assures durability.
n
2600 Series withstands approximately 150 lbs./sq in.
Provides safe load bearing strength for normal office traffic.
n
1500 Series withstands approximately 200 lbs./sq in.
Provides safe load strength for normal office traffic.
n
Full line of fittings.
Provides a complete and safe
installation.
n
Unpainted.
Paintable to match decor.
n
UL Listed and CSA certified.
File E4376 Guide RJBT
fittings. File 41751 Guide RJPR. CSA File 350.
n
UL5.
Raceway is compliant with UL5 specifications.
1500 and 2600 Series Overfloor
Raceway can be installed over floor
coverings to provide either permanent
or temporary access to services.
ED536R4 – Updated July 2013 – For latest specs visit www.legrand.us/wiremold
1500 Series Overfloor Raceway System Layout
2400
Conduit or
Armored Cable
1585
V1517B
1500
1518
2642D
1546B
1546A
1528
NOTE: Illustration is for
showing product
applications only.
1517
1511
1500
2686FO
2600
V500
V1517B
1528
1585
1546A
1546B
1511
1517
1518
2642D
2686FO
2600
2400
V500
—
1500
Adapter Fitting
Utility Box
Combination Connector
Single Receptacle Box
Duplex Receptacle Box
90° Flat Elbow
Internal Elbow
External Elbow
Junction Box
Transition Feed Fitting
2600 Series Pancake
Overfloor Steel Raceway
2400 Series Raceway
500/700 Series Raceway
1/2" Conduit or
Armored Cable
1500 Series Overfloor Raceway System Wire Fill Capacity Charts
1500 Series Overfloor Raceway Wire Fill Capacities for Power
WIRE SIZE
THHN/THWN
O.D.
inches
[mm]
40% FILL
POWER WIRING
14 AWG
12 AWG
10 AWG
0.111
0.130
0.164
[2.8]
[3.3]
[4.2]
9
6
4
1500 Series Overfloor Raceway Wire Fill Capacities for Communications
CABLE/WIRE SIZE
O.D. (Approx. Dia.)
Inches
[mm]
40% FILL
UNSHIELDED
TWISTED PAIR
4-pair,
4-pair,
4-pair,
4-pair,
25-pair,
RG6/U
24 AWG, Cat 3
24 AWG, Cat 5e
24 AWG, Cat 6
24 AWG, Cat 6a*
24 AWG
0.190
0.210
0.250
0.354
0.410
0.270
0.118 x 0.236
0.187
0.256
[4.8]
[5.3]
[6.3]
[9.0]
[10.4]
[6.9]
[3 x 6]
[4.8]
[6.5]
3
2
1
0
0
1
3
3
1
COAXIAL
FIBER
ZipCord
Round 4 Strand Fiber
Round 6 Strand Fiber
NOTE: For additional information, refer to the Technical Section.
* Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed
cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.
2
1500 Series Overfloor Raceway System Ordering Information
Catalog No./Item
1500-10
11/32"
[9mm]
Description/Specifications
Base and Cover
– .040" [1mm]
galvanized steel. Packed ten (10)
10' [3.05m] lengths per carton.
Base has 9/32" [7.1mm] mounting
holes on 8" [203mm] centers.
Catalog No./Item
1528
5/8"
[15.9mm]
Description/Specifications
Utility Box
– Cover has 1/2" trade
size KO. May be used as a cross,
tee, straight through, or to
terminate run. Two 1500WC wire
clips included. No knockouts on
base of unit.
1 21/32"
[42mm]
1 9/16"
[40mm]
3 1/4"
[82mm]
1542D
1500WC
3/8"
[9.5mm]
Wire Clip
– For holding conductors
in place. Not UL Listed.
23/32"
[18mm]
4" dia.
[102mm]
Junction Box
– May be used as a
cross, tee, or elbow. Base has
1/2" and 3/4" trade size concentric
KOs. Cover has 1/2" trade size KO.
Two 1500WC wire clips included.
1502
Fiber Bushing
– Protects wires
from abrasion. Slips into open end
of 1500 Series Raceway where it
enters a fitting.
656
8 1/4"
[210mm]
Cover Removal Tool –
For removing cover of 1500 and
2600 Series Overfloor Raceways.
1504
1/2"
[13mm]
Strap
– Two-hole strap. Use to
fasten 1500 Series Raceway to
surfaces at any point desired.
1543GL
5 1/16"
[129mm]
1 5/16"
[33mm]
1511
2 5/8"
[6.7mm]
ea. leg
90° Flat Elbow
– For right angle
turns on the same surface.
3 1/16"
[78mm]
Grounding Duplex
– Cover has
1500 and 2600 twistouts on all four
sides. Base has 1/2" and 3/4"
concentric trade size KOs. Two
1500WC Wire Clips included.
Gray finish.
1 3/4"
[44mm]
ea. leg
1546A
5 1/16"
[129mm]
1 5/16"
[33mm]
1517
Internal Elbow
– For internal
90° corners.
3 1/16"
[78mm]
2 1/2"
[64mm]
1.405" dia.
[36mm]
Single Receptacle Box
–
Accommodates commercially
available straight blade and locking
single receptacles with face
diameters of 1.38-1.40" [34.5-
35mm]. Base has concentric 1/2"
and 3/4" trade size KOs. Cover has
1500 and 2600 twistouts on
all four sides. Two 1500WC wire
clips included.
Duplex Receptacle Box
– Accom-
modates commercially available
15A or 20A duplex receptacles.
Base has concentric 1/2" and
3/4" trade size KOs. Cover has
1500 and 2600 twistouts on all four
sides. Two 1500WC wire clips
included. Side wiring recommended.
V1517B
2 15/16"
[75mm]
Adapter Fitting
– To feed to or
from 500 or 700 Series Raceway
on wall to 1500 Series Raceway
on the floor.
2 1/8"
[54mm]
1546B
5 1/16"
[129mm]
1 5/16"
[33mm]
3 1/16"
[78mm]
1518
External Elbow
– For external
90° corners.
2 1/2"
[64mm]
ea. leg
3
1500 Series Overfloor Raceway System Ordering Information
(continued)
Catalog No./Item
1546T
5 1/16"
[129mm]
1 5/16"
[33mm]
Description/Specifications
Telephone Outlet Box
– Furnished
with 1/2" [12.7mm] rubber stem.
Accepts modular connecting
blocks within the fitting. Cover has
1500 and 2600 twistouts on both
ends and both sides. Two 1500WC
wire clips included. Not UL Listed.
Catalog No./Item
1585
3/4"
[19mm]
Description/Specifications
Combination Connector
– For
connecting 1/2" trade size
conduit or armored cable to
1500 Series Raceway.
1 5/8"
[41mm]
3 1/16"
[78mm]
1 21/32"
[42mm]
3 1/4"
[83mm]
27/32"
[21.4mm]
4
2600 Series Overfloor Raceway System Layout
2642D
1543GL
500
1500
Flexible Conduit
V1517B
2400
Junction Box
Grounding Duplex
Receptacle & Cover
Single Receptacle Box
90° Flat Elbow
Transition Feed Fitting
Wiremold 2400 Series
Raceway
Wiremold 1500 Series
Raceway
Adapter Fitting
Wiremold 2600 Series
Overfloor Steel Raceway
Wiremold 200, 500 or 700
Series Raceway
1/2" [12.7mm] Flexible
Conduit
1/2" or 3/4" Conduit
to Underfloor Duct System
1546A
2611
2686FO
2400
1500
2642D
1543GL
2600
2642D
1546A
2686FO
2600
2611
V1517B
2600
500
NOTE: Illustration is for
showing product
applications only.
Conduit
Conduit
Conduit
2600 Series Overfloor Raceway System Wire Fill Capacity Charts
2600 Series Overfloor Raceway Wire Fill Capacities for Power
WIRE SIZE
THHN/THWN
O.D.
inches
[mm]
NO. OF CONDUCTORS
40% FILL
POWER WIRING
14 AWG
12 AWG
10 AWG
0.111
0.130
0.164
[2.8]
[3.3]
[4.2]
29
21
13
2600 Series Overfloor Raceway Wire Fill Capacities for Communications
CABLE/WIRE SIZE
O.D. (Approx. Dia.)
Inches
[mm]
40% FILL
UNSHIELDED
TWISTED PAIR
4-pair,
4-pair,
4-pair,
4-pair,
25-pair,
RG6/U
24 AWG, Cat 3
24 AWG, Cat 5e
24 AWG, Cat 6
24 AWG, Cat 6a*
24 AWG
0.190
0.210
0.250
0.354
0.410
0.270
0.118 x 0.236
0.187
0.256
[4.8]
[5.3]
[6.3]
[9.0]
[10.4]
[6.9]
[3 x 6]
[4.8]
[6.5]
10
8
5
2
2
5
10
10
5
COAXIAL
FIBER
ZipCord
Round 4 Strand Fiber
Round 6 Strand Fiber
NOTE: For additional information, refer to the Technical Section.
* Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed
cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.
2600 Series Overfloor Raceway System Ordering Information
Catalog No./Item
2600-10
23/32"
[18mm]
Description/Specifications
Base and Cover
– Cover: .050"
[1.25mm] galvanized steel. Base:
.040" [1mm] galvanized steel.
Packed (5) 10 ft. [3.050m] lengths
per carton. Base has 9/32" [7.1mm]
dia. mounting holes on centers of
approximately 8" [203mm].
Catalog No./Item
2600WC
Description/Specifications
Wire Clip
– For holding conductors
in place.
3/4"
[19mm]
2602
2 7/32"
[56mm]
Fiber Bushing
– Protects wires
from abrasion. Bushing slips into
open end of 2600 where it enters
a fitting.
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
