Document Revision History for Intel MAX 10 FPGA Device Datasheet........................................................................................ 66
Intel
®
MAX
®
10 FPGA Device Datasheet
2
M10-DATASHEET | 2017.12.15
Intel
®
MAX
®
10 FPGA Device Datasheet
This datasheet describes the electrical characteristics, switching characteristics, configuration specifications, and timing for
Intel MAX
®
10 devices.
Table 1.
Intel MAX 10 Device Grades and Speed Grades Supported
Device Grade
Commercial
•
•
•
•
•
•
–C7
–C8 (slowest)
–I6 (fastest)
–I7
–A6
–A7
Speed Grade Supported
Industrial
Automotive
Note:
The –I6 and –A6 speed grades of the Intel MAX 10 FPGA devices are not available by default in the Intel Quartus
®
Prime
software. Contact your local Intel sales representatives for support.
Related Links
Device Ordering Information, Intel MAX 10 FPGA Device Overview
Provides more information about the densities and packages of devices in the Intel MAX 10.
Electrical Characteristics
The following sections describe the operating conditions and power consumption of Intel MAX 10 devices.
Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Arria, Cyclone, Enpirion, MAX, Nios, Quartus and Stratix words and logos are trademarks of Intel
Corporation or its subsidiaries in the U.S. and/or other countries. Intel warrants performance of its FPGA and semiconductor products to current specifications in
accordance with Intel's standard warranty, but reserves the right to make changes to any products and services at any time without notice. Intel assumes no
responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in writing by
Intel. Intel customers are advised to obtain the latest version of device specifications before relying on any published information and before placing orders for
products or services.
*Other names and brands may be claimed as the property of others.
ISO
9001:2008
Registered
Intel
®
MAX
®
10 FPGA Device Datasheet
M10-DATASHEET | 2017.12.15
Operating Conditions
Intel MAX 10 devices are rated according to a set of defined parameters. To maintain the highest possible performance and
reliability of the Intel MAX 10 devices, you must consider the operating requirements described in this section.
Absolute Maximum Ratings
This section defines the maximum operating conditions for Intel MAX 10 devices. The values are based on experiments
conducted with the devices and theoretical modeling of breakdown and damage mechanisms. The functional operation of the
device is not implied for these conditions.
Caution:
Conditions outside the range listed in the absolute maximum ratings tables may cause permanent damage to the device.
Additionally, device operation at the absolute maximum ratings for extended periods of time may have adverse effects on the
device.
Single Supply Devices Absolute Maximum Ratings
Table 2.
Absolute Maximum Ratings for Intel MAX 10 Single Supply Devices
Symbol
V
CC_ONE
V
CCIO
V
CCA
Parameter
Supply voltage for core and periphery through on-die voltage
regulator
Supply voltage for input and output buffers
Supply voltage for phase-locked loop (PLL) regulator and analog-to-
digital converter (ADC) block (analog)
Min
–0.5
–0.5
–0.5
Max
3.9
3.9
3.9
Unit
V
V
V
Dual Supply Devices Absolute Maximum Ratings
Table 3.
Absolute Maximum Ratings for Intel MAX 10 Dual Supply Devices
Symbol
V
CC
V
CCIO
V
CCA
Parameter
Supply voltage for core and periphery
Supply voltage for input and output buffers
Supply voltage for PLL regulator (analog)
Min
–0.5
–0.5
–0.5
Max
1.63
3.9
3.41
Unit
V
V
V
continued...
Intel
®
MAX
®
10 FPGA Device Datasheet
4
Intel
®
MAX
®
10 FPGA Device Datasheet
M10-DATASHEET | 2017.12.15
Symbol
V
CCD_PLL
V
CCA_ADC
V
CCINT
Parameter
Supply voltage for PLL regulator (digital)
Supply voltage for ADC analog block
Supply voltage for ADC digital block
Min
–0.5
–0.5
–0.5
Max
1.63
3.41
1.63
Unit
V
V
V
Absolute Maximum Ratings
Table 4.
Absolute Maximum Ratings for Intel MAX 10 Devices
Symbol
V
I
I
OUT
T
STG
T
J
DC input voltage
DC output current per pin
Storage temperature
Operating junction temperature
Parameter
Min
–0.5
–25
–65
–40
Max
4.12
25
150
125
Unit
V
mA
°C
°C
Maximum Allowed Overshoot During Transitions over a 11.4-Year Time Frame
During transitions, input signals may overshoot to the voltage listed in the following table and undershoot to –2.0 V for input
currents less than 100 mA and periods shorter than 20 ns.
The maximum allowed overshoot duration is specified as a percentage of high time over the lifetime of the device. A DC signal
is equivalent to 100% duty cycle.
For example, a signal that overshoots to 4.17 V can only be at 4.17 V for ~11.7% over the lifetime of the device; for a device
lifetime of 11.4 years, this amounts to 1.33 years.
Table 5.
Maximum Allowed Overshoot During Transitions over a 11.4-Year Time Frame for Intel MAX 10 Devices
1 Introduction
In the mid-1960s, American scientist Maas conducted extensive experimental research on the charging process of open-cell batteries and proposed an acceptable charging curve for ...[详细]
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
