Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Specification
Parameter
Min
General Performance
Operating Frequency
Gain
Output Voltage
OIP3 at Mid-Band
P1dB at Mid-Band
P3dB at Mid-Band
Noise Figure at Mid-Band
Input Return Loss
Output Return Loss
Supply Current
Supply Voltage
DC
8
3
24
14.5
16.5
5.0
12
12
80
5
50
GHz
dB
V
P-P
dBm
dBm
dBm
dB
dB
dB
mA
V
DC
20GHz
20GHz
20GHz
DC to 50GHz
DC to 50GHz
3dB BW
Unit
Typ
Max
Condition
T
A
= +25°C, V
DD
= +5V
DC,
V
G2
= +2.2V
DC
,
I
DD
= 80mA*
*Adjust V
TI
between -1.5V
DC
to +0.2V
DC
to achieve I
DD
= 80mA typical.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS140210
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 8
SDA-6000
Typical Performance
(See section at the end of the data sheet for measurement comments)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS140210
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 8
SDA-6000
Typical Performance (Continued)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS140210
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 8
SDA-6000
Application Schematic
Die Drawing
(Dimensions in microns)
Notes:
1.
2.
3.
4.
5.
6.
No connection required for unlabeled bond pads
Die thickness is 0.102mm (4mil)
Typical bond pad is 0.100mm square
Backside metallization: gold
Backside metal is ground
Bond pad metallization: gold
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or
customerservice@rfmd.com.
DS140210
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
