HCPL-2400, HCPL-2430
20 MBd High CMR Logic Gate Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-2400 and HCPL-2430 high speed opto-cou-
plers combine an 820 nm AlGaAs light emitting diode
with a high speed photodetector. This combina-tion re-
sults in very high data rate capability and low input cur-
rent. The totem pole output (HCPL-2430) or three state
output (HCPL-2400) eliminates the need for a pull up re-
sistor and allows for direct drive of data buses.
The detector has optical receiver input stage with built-
in Schmitt trigger to provide logic compatible wave-
forms, eliminating the need for additional waveshaping.
The hysteresis provides differential mode noise immuni-
ty and minimizes the potential for output signal chatter.
The electrical and switching characteristics of the HCPL-
2400 and HCPL-2430 are guaranteed over the tempera-
ture range of 0°C to 70°C.
Functional Diagram
HCPL-2400/11
1 NC
2
3
4 NC
V
CC
8
7
6
5
ANODE 1 1
CATHODE 1 2
CATHODE 2 3
ANODE 2 4
HCPL-2430
8 V
CC
7 V
O1
6
V
O2
Features
• High speed: 40 MBd typical data rate
• High common mode rejection:
HCPL-2400: 10 kV/µs at V
CM
= 300 V (typical)
• AC performance guaranteed over temperature
• High speed AlGaAs emitter
• Compatible with TTL, STTL, LSTTL, and HCMOS logic
families
• Totem pole and tri state output (no pull up resistor
required)
• Safety approval
– UL recognized – 3750 V rms for 1 minute per
UL1577
– IEC/EN/DIN EN 60747-5-2 approved with
V
IORM
= 630 V
peak
(Option 060) for HCPL-2400
– CSA approved
• High power supply noise immunity
• MIL-PRF-38534 hermetic version available
(HCPL-5400/1 and HCPL-5430/1)
Applications
• Isolation of high speed logic systems
• Computer-peripheral interfaces
• Switching power supplies
GND
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED
ON
OFF
ON
OFF
ENABLE
L
L
H
H
OUTPUT
L
H
Z
Z
TRUTH TABLE
(POSITIVE LOGIC)
LED
OUTPUT
ON
L
OFF
H
• Isolated bus driver (networking applications)
• Ground loop elimination
• High speed disk drive I/O
• Digital isolation for A/D, D/A conversion
• Pulse transformer replacement
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
HCPL-2400 Functional Diagram
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
These optocouplers are compatible with TTL, STTL, LSTTL, and HCMOS logic families. When Schottky type TTL devices
(STTL) are used, a data rate performance of 20 MBd over temperature is guaranteed when using the application cir-
cuit of Figure 13. Typical data rates are 40 MBd.
Selection Guide
8-Pin DIP (300 Mil)
Minimum CMR
Single
Dual
Channel
Channel
dV/dt
Package
Package
(V/µs)
HCPL-2400
1000
HCPL-2430
1000
500
500
500
V
CM
(V)
300
50
50
50
50
Minimum Input
On Current
(mA)
4
4
6
6
6
Maximum
Propagation Delay
(ns)
60
60
60
60
60
Hermetic
Package
HCPL-540X*
HCPL-543X*
HCPL-643X*
*Technical data for the Hermetic HCPL-5400/01, HCPL-5430/31, and HCPL-6430/31 are on separate Avago publications.
Ordering Information
HCPL-2400 and HCPL-2430 are UL Recognized with 3750 Vrms for 1 minute per UL1577.
Option
Part
number
RoHS
Compliant
-000E
HCPL-2400
-300E
-500E
-060E
-360E
-000E
-300E
HCPL-2430
-500E
-020E
-060E
Non RoHS
Compliant
No option
#300
#500
#060
-360
No option
#300
#500
-
-
300mil
DIP-8
X
X
X
X
X
X
X
300mil
DIP-8
X
X
X
X
X
X
X
X
X
Package
Surface
Mount
Gull
Wing
Tape
& Reel
UL 5000 Vrms/1 IEC/EN/DIN EN
Minute rating
60747-5-2
Quantity
50 per tube
50 per tube
1000 per reel
50 per tube
50 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-2430-500E to order product of Gull Wing Surface Mount package in Tape in RoHS compliant.
Example 2:
HCPl-2400 to order product of 8-Pin DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use ‘-XXXE‘.
2
Package Outline Drawings
8-Pin DIP Package (HCPL-2400, HCPL-2430)
9.65 ± 0.25
(0.380 ± 0.010)
TYPE NUMBER
8
7
6
5
OPTION CODE*
DATE CODE
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
A XXXXZ
YYWW RU
1
1.19 (0.047) MAX.
2
3
4
UL
RECOGNITION
1.78 (0.070) MAX.
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
5° TYP.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
*MARKING CODE LETTER FOR OPTION NUMBERS.
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
8-Pin DIP Package with Gull Wing Surface Mount Option 300
(HCPL-2400, HCPL-2430)
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
8
7
6
5
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1
2
3
4
1.27 (0.050)
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
2.0 (0.080)
1.19
(0.047)
MAX.
3.56 ± 0.13
(0.140 ± 0.005)
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.130
2.54
(0.025 ± 0.005)
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.25
(0.025 ± 0.010)
12° NOM.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
4
Solder Reflow Thermal Profile
300
PREHEATING RATE 3°C + 1°C/–0.5°C/SEC.
REFLOW HEATING RATE 2.5°C ± 0.5°C/SEC.
PEAK
TEMP.
245°C
PEAK
TEMP.
240°C
TEMPERATURE (°C)
200
160°C
150°C
140°C
PEAK
TEMP.
230°C
2.5°C ± 0.5°C/SEC.
30
SEC.
3°C + 1°C/–0.5°C
30
SEC.
SOLDERING
TIME
200°C
100
PREHEATING TIME
150°C, 90 + 30 SEC.
50 SEC.
TIGHT
TYPICAL
LOOSE
ROOM
TEMPERATURE
0
0
50
100
150
200
250
TIME (SECONDS)
Note: Non-halide flux should be used.
Recommended Pb-Free IR Profile
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
t
p
T
p
T
L
TEMPERATURE
260 +0/-5 °C
217 °C
RAMP-UP
3 °C/SEC. MAX.
150 - 200 °C
T
smax
T
smin
RAMP-DOWN
6 °C/SEC. MAX.
t
s
PREHEAT
60 to 180 SEC.
25
t
L
60 to 150 SEC.
t 25 °C to PEAK
TIME
NOTES:
THE TIME FROM 25 °C to PEAK TEMPERATURE = 8 MINUTES MAX.
T
smax
= 200 °C, T
smin
= 150 °C
Note: Non-halide flux should be used.
Regulatory Information
The HCPL-24XX has been approved by the following organizations:
VDE
Approved according to VDE 0884/06.92 (Option 060
only).
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884
Teil 2):2003-01.
(Option 060 only)
5
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
