To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FOD8318 — 2.5 A Output Current, IGBT Drive Optocoupler with Active Miller Clamp, Desaturation Detection, and Isolated Fault Sensing
December 2012
FOD8318
2.5 A Output Current, IGBT Drive Optocoupler
with Active Miller Clamp, Desaturation Detection, and
Isolated Fault Sensing
Features
High noise immunity characterized by common mode
Description
The FOD8318 is an advanced 2.5 A output current
IGBT drive optocoupler capable of driving most
1200 V / 150 A IGBTs. It is ideally suited for fast-switch-
ing driving of power IGBTs and MOSFETs used in motor
control inverter applications and high-performance
power systems. It consists of an integrated gate drive
optocoupler featuring low R
DS(ON)
CMOS transistors to
drive the IGBT from rail to rail and an integrated high-
speed isolated feedback for fault sensing. The FOD8318
has an active Miller clamp fuction to shut off the IGBT
during a high dv/dt situation without the need of a nega-
tive supply voltage. It offers critical protection features
necessary for preventing fault conditions that lead to
destructive thermal runaway of IGBTs.
It utilizes Fairchild’s proprietary Optoplanar
®
coplanar
packaging technology and optimized IC design to
achieve high noise immunity, characterized by high
common mode rejection and power supply rejection
specifications.
The device is housed in a compact 16-pin small outline
plastic package that meets the 8 mm creepage and
clearance requirements.
rejection
– 35 kV / µs Minimum Common Mode Rejection
(Vcm = 1500 V
peak
)
2.5 A peak output current driving capability for most
1200 V / 150 A IGBT
Optically isolated fault sensing feedback
Active Miller clamp to shut off the IGBT during high
dv/dt without needing a negative supply voltage
“Soft” IGBT turn-off
Built-in IGBT protection
– Desaturation detection
– Under-voltage lock out (UVLO) protection
Wide supply voltage range from 15 V to 30 V
– Use of P-Channel MOSFETs at output stage
enables output voltage swing close to the supply
rail (rail-to-rail output)
3.3 V / 5 V, CMOS/TTL-compatible inputs
High Speed
– 500 ns max. propagation delay over full operating
temperature range
Extended industrial temperate range, -40°C to 100°C
temperature range
Safety and regulatory approvals
– UL1577, 4,243 V
RMS
for 1 min.
– DIN EN/IEC 60747-5-5,1,414 V
peak
working
insulation voltage, 8000 V
peak
transient isolation
voltage ratings
R
DS(ON)
of 1
(typ.) offers lower power dissipation
User configurable: inverting, non-inverting, auto-reset,
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
