CLD-DS112 Rev 1L
Product family data sheet
Cree
®
XLamp
®
MHD-E LEDs
ProDuCt DEsCriPtion
The XLamp
®
MHD-e LeD is a new
generation of high-power LeD that
delivers a more effective way to achieve
low-cost systems than mid-power (MP)
LeDs. Built using Cree’s high-reliability
ceramic-package technology, the XLamp
MHD-e LeD is able to operate at higher
temperatures than MP LeDs with no
reduction in rated lifetime, enabling
an impressive 60% reduction in heat
sink size and cost. Using many times
fewer LeDs than MP LeDs to achieve
the same performance, the XLamp
MHD-e LeD is optimized to simplify
LeD system designs for directional and
semi-directional applications.
FEAturEs
•
Flexible 9-v, 18-v or 36-v options
• Maximum drive current: 1400 mA
(9 V), 700 mA (18 V), 350 mA (36 V)
• Viewing angle: 115°
• Available in 70‑CRI, 80‑CRI and 90‑CRI
options
• Unlimited floor life at ≤ 30 ºC/85% RH
• Reflow solderable ‑ JEDEC
J‑STD‑020C
•
electrically neutral thermal path
• RoHS and REACh compliant
•
UL
®
recognized component (e349212)
tAbLE oF ContEnts
Characteristics .......................................... 2
Flux Characteristics, easyWhite
®
Order
Codes and Bins ‑ 9 V/18 V
........................ 3
Flux Characteristics, easyWhite
®
Order
Codes and Bins ‑ 36 V
...............................
5
Relative Spectral Power Distribution .......
7
Relative Flux vs. Junction Temperature
...
7
electrical Characteristics .......................... 8
Relative Flux vs. Current ........................... 9
Relative Chromaticity vs. Current........... 11
Relative Chromaticity vs. Temperature .. 12
Typical Spatial Distribution..................... 13
Thermal Design ....................................... 13
Performance Groups – Luminous Flux..
15
Performance Groups – Chromaticity.....
15
Cree’s Standard White Chromaticity
Regions Plotted on the 1931 CIE Curve
. 16
Bin and Order Code Format ....................
17
Reflow Soldering Characteristics
........... 18
Notes ....................................................... 19
Mechanical Dimensions ......................... 21
Electrical Configuration
.......................... 23
Tape and Reel .......................................... 24
Packaging ................................................
25
WWW.CREE.Com/XLAmp
Copyright © 2015-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, XLamp
®
and
EasyWhite
®
are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp
®
mHD-E LED
CHArACtEristiCs
MHD‑E 9‑V/18‑V LEDs are tested and binned in production in the 18‑V configuration. MHD‑E 36‑V LEDs are tested and binned in production
in the 36‑V configuration. See the Mechanical Dimensions section on page 21 for pad layout options.
Characteristics
Thermal resistance, junction to solder point
viewing angle (FWHM)
Temperature coefficient of voltage (9 V)*
Temperature coefficient of voltage (18 V)
Temperature coefficient of voltage (36 V)
eSD withstand voltage (HBM per Mil-Std-883D)
DC forward current (9 V)*
DC forward current (18 V)
DC forward current (36 V)
Reverse current (9 V, 18 V, 36 V)*
Forward voltage (9 V, @ 800 mA, 85 °C)*
Forward voltage (18 V, @ 400 mA, 85 °C)
Forward voltage (36 V, @ 200 mA, 85 °C)
LeD junction temperature
unit
°C/W
degrees
mV/°C
mV/°C
mV/°C
v
mA
mA
mA
mA
v
v
v
°C
9.1
18.2
36.3
Minimum
typical
3.2
115
‑3.75
‑7.5
‑15
8000
1400
700
350
-0.1
10
20
40
150
Maximum
* Data for the 9‑V configuration is calculated and for reference only.
Copyright © 2015-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, XLamp
®
and EasyWhite
®
are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
2
XLamp
®
mHD-E LED
FLuX CHArACtEristiCs, EAsyWHitE
®
Order COdes and Bins - 9 V/18 V
The following table provides order codes for XLamp MHD-e LeDs. For a complete description of the order code nomenclature, please see
the Bin and Order Code Formats section (page 17).
Test condition: T
J
= 85 °C, 18 V, I
F
= 400 mA
Reference condition: T
J
= 85 °C, 9 V, I
F
= 800 mA
nominal
CCt
Cri
Min
Minimum Luminous Flux
Group
H2
70
H4
6500 K
G4
80
H2
H2
70
H4
5700 K
G4
80
H2
H2
70
H4
G4
5000 K
80
H2
F4
90
G2
780
873
900
730
1007
817
50G
970
840
1085
940
50G
MHDeWT-0000-
000C0HG450G
MHDeWT-0000-
000C0HH250G
MHDeWT-0000-
000C0UF450G
MHDeWT-0000-
000C0UG250G
900
900
1007
1007
50E
840
940
57E
970
1085
900
900
1007
1007
57E
840
940
65E
970
1085
Flux (lm)
@ 85 °C
900
Flux (lm)
@ 25 °C*
1007
65E
Group
2-step
order Code
Group
3-step
order Code
Group
5-step
order Code
MHDeWT-0000-
000C0BH265E
MHDeWT-0000-
000C0BH465E
MHDeWT-0000-
000C0HG465E
MHDeWT-0000-
000C0HH265E
MHDeWT-0000-
000C0BH257E
MHDeWT-0000-
000C0BH457E
MHDeWT-0000-
000C0HG457E
MHDeWT-0000-
000C0HH257E
MHDeWT-0000-
000C0BH250E
MHDeWT-0000-
000C0BH450E
MHDeWT-0000-
000C0HG450E
MHDeWT-0000-
000C0HH250E
MHDeWT-0000-
000C0UF450E
MHDeWT-0000-
000C0UG250E
50E
50E
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 19).
• Cree XLamp MHD‑E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, XLamp
®
and EasyWhite
®
are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
3
XLamp
®
mHD-E LED
FLuX CHArACtEristiCs, EAsyWHitE
®
Order COdes and Bins - 9 V/18 V - COntinued
nominal
CCt
Cri
Min
Minimum Luminous Flux
Group
G4
70
H2
H4
G2
4000 K
80
G4
H2
F2
90
F4
G2
80
G4
3500 K
F2
90
F4
G2
80
G4
3000 K
F2
90
F4
G2
80
G4
2700 K
e4
90
F2
680
761
635
710
27H
840
940
730
780
817
873
27H
680
761
30H
840
940
730
780
817
873
30H
680
761
35H
840
940
730
780
817
873
35H
840
900
680
940
1007
761
40H
40H
Flux (lm)
@ 85 °C
840
900
970
780
Flux (lm)
@ 25 °C*
940
1007
1085
873
MHDeWT-0000-
000C0HG240H
MHDeWT-0000-
000C0HG440H
MHDeWT-0000-
000C0HH240H
MHDeWT-0000-
000C0UF240H
MHDeWT-0000-
000C0UF440H
MHDeWT-0000-
000C0HG235H
MHDeWT-0000-
000C0HG435H
MHDeWT-0000-
000C0UF235H
MHDeWT-0000-
000C0UF435H
MHDeWT-0000-
000C0HG230H
MHDeWT-0000-
000C0HG430H
MHDeWT-0000-
000C0UF230H
MHDeWT-0000-
000C0UF430H
MHDeWT-0000-
000C0HG227H
MHDeWT-0000-
000C0HG427H
MHDeWT-0000-
000C0UE427H
MHDeWT-0000-
000C0UF227H
40G
MHDeWT-0000-
000C0HG240G
MHDeWT-0000-
000C0HG440G
MHDeWT-0000-
000C0HH240G
MHDeWT-0000-
000C0UF240G
MHDeWT-0000-
000C0UF440G
MHDeWT-0000-
000C0HG235G
MHDeWT-0000-
000C0HG435G
MHDeWT-0000-
000C0UF235G
MHDeWT-0000-
000C0UF435G
MHDeWT-0000-
000C0HG230G
MHDeWT-0000-
000C0HG430G
MHDeWT-0000-
000C0UF230G
MHDeWT-0000-
000C0UF430G
MHDeWT-0000-
000C0HG227G
MHDeWT-0000-
000C0HG427G
MHDeWT-0000-
000C0UE427G
MHDeWT-0000-
000C0UF227G
40e
Group
2-step
order Code
Group
3-step
order Code
Group
5-step
order Code
MHDeWT-0000-
000C0BG440e
MHDeWT-0000-
000C0BH240e
MHDeWT-0000-
000C0BH440e
40G
35G
35G
30G
30G
27G
27G
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 19).
• Cree XLamp MHD‑E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, XLamp
®
and EasyWhite
®
are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
4
XLamp
®
mHD-E LED
FLuX CHArACtEristiCs, EAsyWHitE
®
Order COdes and Bins - 36 V
The following table provides order codes for XLamp MHD-e LeDs. For a complete description of the order code nomenclature, please see
the Bin and Order Code Formats section (page 17).
Test condition: T
J
= 85 °C, 36 V, I
F
= 200 mA
nominal
CCt
Cri
Min
Minimum Luminous Flux
Group
H2
70
H4
6500 K
G4
80
H2
H2
70
H4
5700 K
G4
80
H2
H2
70
H4
G4
5000 K
80
H2
F4
90
G2
780
873
900
730
1007
817
50G
970
840
1085
940
50G
MHDeWT-0000-
000N0HG450G
MHDeWT-0000-
000N0HH250G
MHDeWT-0000-
000N0UF450G
MHDeWT-0000-
000N0UG250G
900
900
1007
1007
50E
840
940
57E
970
1085
900
900
1007
1007
57E
840
940
65E
970
1085
Flux (lm)
@ 85 °C
900
Flux (lm)
@ 25 °C*
1007
65E
Group
2-step
order Code
Group
3-step
order Code
Group
5-step
order Code
MHDeWT-0000-
000N0BH265E
MHDeWT-0000-
000N0BH465E
MHDeWT-0000-
000N0HG465E
MHDeWT-0000-
000N0HH265E
MHDeWT-0000-
000N0BH257E
MHDeWT-0000-
000N0BH457E
MHDeWT-0000-
000N0HG457E
MHDeWT-0000-
000N0HH257E
MHDeWT-0000-
000N0BH250E
MHDeWT-0000-
000N0BH450E
MHDeWT-0000-
000N0HG450E
MHDeWT-0000-
000N0HH250E
MHDeWT-0000-
000N0UF450E
MHDeWT-0000-
000N0UG250E
50E
50E
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 19).
• Cree XLamp MHD‑E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2015-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, XLamp
®
and EasyWhite
®
are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL
®
and the UR logo are registered trademarks of UL LLC.
5
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
