To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FAN5646 — Programmable Indicator ―Soft‖ LED Blinker with TinyWire™ Interface
May 2013
FAN5646
Programmable Indicator ―Soft‖ LED Blinker with TinyWire™
Single-Wire Interface
Features
LED “Soft” Blink: with Logarithmic Fade Up and Fade
Down for Power Savings
Follow or Repeat Pattern Mode for Blinking when
Applications Processor is Powered Down
Default Pattern Optionally Modified using TinyWire™
Single-Wire Digital Control for:
–
LED Current Rise / Fall Time
–
t
ON
and t
OFF
for Up to Two Pulses
High-Side Constant Current LED Driver:
–
20 mA Maximum Output Current
–
80 mV Drop-out at 20 mA I
OUT
–
External R
SET
(SC70 only) or Internal Current
Programming
35
A
Operating Quiescent Current
Short-Circuit, Under-Voltage, and Thermal Protections
Wide Input Range: 2.7 to 5.5 V
4-Bump WLCSP, 0.4 mm pitch or
5-Lead SC70 (EIAJ SC88)
2.7 to 5.5V
0.1
Description
The FAN5646 is a flexible and compact solution for a blinking
or “breathing” LED indicator. The internal programmable blink
algorithm eliminates any need for continual system processor
control. This means longer battery life for a hand-held system
because the system processor is not awakened from sleep
mode to blink an LED.
Very low dropout of 80 mV allows driving an LED without any
inductors or switch capacitors. LED blink rate, rise and fall
time, and CTRL line behavior can be programmed by a
TinyWire™ single-wire digital interface. The on-time and time
between pulses can be set for up to two different pulse widths.
The default for FAN5646 option 01 is “follow” mode, where the
LED turns on with the programmed rise time, then stays on as
long as CTRL remains HIGH. When CTRL falls, the LED turns
off at the programmed fall time. For option 00; when CTRL is
HIGH continuously, the LED repeats the programmed pattern.
The FAN5646 is available in a four-pin wafer-level chip-scale
package with 0.4 mm pitch or a five-lead SC70 package.
VIN
GND
ISET
1
2
3
5
LED+
Applications
Cell Phone
Pocket PCs and Digital Cameras
Bluetooth Headsets PMP and MP3 players
®
4
CTRL
R=24.3kW
Figure 1. Typical Application
Ordering Information
Part Number
FAN5646UC00X
FAN5646S700X
FAN5646UC01X
FAN5646S701X
Option Follow Bit Default Temperature Range
00
00
01
01
0
0
1
1
-40 to 85°C
-40 to 85°C
-40 to 85°C
-40 to 85°C
Package
WLCSP-4, 0.4mm Pitch
WLCSP-4, 0.4mm Pitch
Packing
Tape and Reel
Tape and Reel
5-Lead SC70, EIAJ SC88 Tape and Reel
5-Lead SC70, EIAJ SC88 Tape and Reel
Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
Important:
Contact a Fairchild Semiconductor sales representative for additional performance information and specifications.
引 言 MAX6636是一个多通道的精密温度监测器，它不仅能监测本地温度，并且外部最多能接6个二极管。每一通道都具有可编程过低温度报警，1、4、5和6通道还具有可编程过高温度报警。当某一通道测得的温度达到其预先设定的极限值时，状态寄存器的相应位就会被置位。MAX6636最显著的优点是采用了微型20引脚TSS OP 封装，能够监测 CPU 和其他4个位置的温度，主要应用于台式电脑、笔记...[详细]
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
