ILLUMINATION
LUXEON CoB with
CrispWhite Technology (Gen 2)
Fashion retail lighting that makes an impact,
revealing the whitest whites
The second generation of LUXEON CoB with CrispWhite Technology
creates the most impactful retail lighting ever available by revealing
the whitest whites. LUXEON CoB with CrispWhite Technology delivers
a natural crisp whiteness by activating Fluorescent Whitening Agents
(FWAs) in paints and fabrics to attractively display merchandise in
retail shops; ideal for CDM/CMH replacement.
FEATURES AND BENEFITS
Lumen packages from 500 to 5,000 lumens for a range of options
Industry’s smallest Light Emitting Surface (LES) for highest flux densities
Up to 4x lower thermal resistance than competitors enabling smaller
heatsinks and higher lumens
Contains violet LEDs and does NOT contain UV LEDs for minimal amount
of damage, much lower than any traditional CDM shop lighting
Mouse bites for M2 and M3 make it easy to work with
PRIMARY APPLICATIONS
Downlights
High Bay & Low Bay
Lamps
Spotlights
DS168 LUXEON CoB with CrispWhite Technology (Gen 2) Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved.
No. E352519
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Forward Current Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Packaging and Labeling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tube Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Inner Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Outer Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DS168 LUXEON CoB with CrispWhite Technology (Gen 2) Product Datasheet 20161030 ©2016 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON CoB with CrispWhite Technology (Gen 2) LEDs are tested and binned with a DC drive current specified below at a
junction temperature, T
j
, of 85°C:
200mA
200mA
300mA
450mA
600mA
900mA
–
–
–
–
–
–
LUXEON CoB 1202s
LUXEON CoB 1202
LUXEON CoB 1203
LUXEON CoB 1204
LUXEON CoB 1205
LUXEON CoB 1208
LUXEON CoB 1211
1200mA –
Part Number Nomenclature
Part numbers for LUXEON CoB with CrispWhite Technology (Gen 2) follow the convention below:
L 2 C 5 – 3 0 9 0
A A A A
E
B B
C 0
Where:
A A A A
– designates product configuration (1202, 1203, 1204, 1205, 1208, 1211)
B B
– designates Light Emitting Surface (LES) size (06=6mm, 09=9mm, 13=13mm, 15=15mm, 19=19mm)
Therefore, the following part number is used for a LUXEON CoB 1203 with a 9mm LES:
L 2 C 5 – 3 0 9 0
1 2 0 3
E
0 9
C 0
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-
term performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. The second
generation of LUXEON CoB with CrispWhite Technology is compliant to the European Union directives on the restriction of
hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006.
Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
DS168 LUXEON CoB with CrispWhite Technology (Gen 2) Product Datasheet 20161030 ©2016 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1 . Product performance of LUXEON CoB with CrispWhite Technology (Gen 2) at test current, T
j
=85°C .
PRODUCT
LUXEON
CoB 1202s
LUXEON
CoB 1202
LUXEON
CoB 1203
LUXEON
CoB 1204
LUXEON
CoB 1205
LUXEON
CoB 1208
LUXEON
CoB 1211
NOMINAL
CCT
3000K
3000K
3000K
3000K
3000K
3000K
3000K
MINIMUM
CRI
[1, 2]
90
90
90
90
90
90
90
LUMINOUS FLUX
[1, 3]
(lm)
MINIMUM
586
611
905
1421
1845
2750
3794
TYPICAL
651
679
1006
1579
2050
3056
4215
TYPICAL LUMINOUS
EFFICACY (lm/W)
93
97
96
99
97
97
100
TEST
CURRENT
(mA)
200
200
300
450
600
900
1200
LES
[4]
(mm)
6
9
9
13
13
15
19
PART NUMBER
L2C5-30901202E06C0
L2C5-30901202E09C0
L2C5-30901203E09C0
L2C5-30901204E13C0
L2C5-30901205E13C0
L2C5-30901208E15C0
L2C5-30901211E19C0
Notes for Table 1:
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
3. Maximum luminous flux is 10% above typical luminous flux.
4. Light Emitting Surface (LES) is the inner diameter (phosphor area) inside the dam.
Optical Characteristics
Table 2 . Optical characteristics for LUXEON CoB with CrispWhite Technology (Gen 2) at test current, T
j
=85°C .
PART NUMBER
L2C5-309012xxExxC0
TYPICAL TOTAL INCLUDED ANGLE
[1]
135°
TYPICAL VIEWING ANGLE
[2]
115°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
DS168 LUXEON CoB with CrispWhite Technology (Gen 2) Product Datasheet 20161030 ©2016 Lumileds Holding B.V. All rights reserved.
3
Electrical and Thermal Characteristics
Table 3 . Electrical and thermal characteristics for LUXEON CoB with CrispWhite Technology (Gen 2) at test current, T
j
=85°C .
PART NUMBER
L2C5-30901202E06C0
L2C5--30901202E09C0
L2C5--30901203E09C0
L2C5--30901204E13C0
L2C5--30901205E13C0
L2C5--30901208E15C0
L2C5--30901211E19C0
FORWARD VOLTAGE
[1]
(V
f
)
MINIMUM
33.0
33.0
33.0
33.0
33.0
33.0
33.0
TYPICAL
35.0
35.0
35.0
35.3
35.3
35.1
35.2
MAXIMUM
38.0
38.0
38.0
38.0
38.0
38.0
38.0
TYPICAL TEMPERATURE
COEFFICIENT OF FORWARD
VOLTAGE
[2]
(mV/°C)
-16
-16
-16
-16
-16
-16
-16
TYPICAL THERMAL
RESISTANCE—JUNCTION
TO CASE
[3]
(°C/W)
0.98
0.91
0.70
0.53
0.45
0.29
0.23
Notes for Table 3:
1. Lumileds maintains a tolerance of ±2% on forward voltage measurements.
2. Measured between 25°C and 85°C for coefficient forward voltage.
3. Thermal resistance is measured between junction and the bottom of the LUXEON CoB substrate.
Absolute Maximum Ratings
Table 4 . Absolute maximum ratings for LUXEON CoB with CrispWhite Technology (Gen 2) .
PARAMETER
DC Forward Current
[1, 2]
LED Junction Temperature
[1]
(DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature
[1]
LED Storage Temperature
Allowable Reflow Cycles
Reverse Voltage (V
reverse
)
MAXIMUM PERFORMANCE
2x test current
125°C
Class 3B
-40°C to 105°C
-40°C to 120°C
3
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. At 10% duty cycle with pulse width of 10ms.
DS168 LUXEON CoB with CrispWhite Technology (Gen 2) Product Datasheet 20161030 ©2016 Lumileds Holding B.V. All rights reserved.
4
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
