Factory Installed Panel Mount
Models RT12/RJ12, 3057/3059
HEX NUT AND
LOCKWASHER
10.31
(.406)
MAX.
20.32
(.80)
TRIMPOT
®
POTENTIOMETER
PANEL MOUNTING OPTIONS AND
HARDWARE
Many Trimpot Potentiometers are
available for panel mount application.
®
Models 3005/3006/3009
6.35
(.25)
#10-32 UNF-2A THD.
This product option provides for
maximum design flexibility.
To order Trimpot
®
Potentiometers with
panel mount hardware attached by the
factory, simply add an “M” or “Z”
suffix to the Bourns part number per
Table I.
Example:
3006P-1-100Z
To order military Trimpot
®
Potentiom-
eters with panel mount hardware
attached by the factory, order the
military part number and add “with panel
mount attached.”
Example:
RT12C2PRC, with panel mount
attached.
To order panel mounting accessories for
customer installation, simply use the part
number per Table II.
Example:
H83P
NOTE: For complete product specifica-
tions, see data sheet for the trimmer
model.
Torque - Apply maximum 8 in. lbs.
on mounting nut when mounted on
panel.
5.94
(.234)
7.95
(.313)
2.54
(.100)
33.35
(1.31)
6.35
(.25)
ADJ. SLOT
2.54 LONG
(.100 )
.508
(.020) WIDE
.762
(.030) DEEP
BUSHING
10-32
NF-2 THD
6.76
±
.38
(.266
±
.015)
1.52 TO 3.30
(.06 TO .13)
3.81
(.150)
ADJ. SLOT
2.54 LONG
(.100)
.635
(.020) WIDE
.762
(.030) DEEP
7.92
(.312)
PANEL
3.30
MAX.
(0.13)
Notes:
1. Provided with lockwasher and
NOTES:
1.
mounting
lockwasher and mounting nut.
Provided with
nut.
2. Recommend panel holes. #10 drill (.194).
Notes:
NOTES:
1. Provided
lockwasher and mounting nut.
with lockwasher and
1. Provided with
2.
mounting nut.
size .200 dia. (#7 drill).
Recommend panel hole
2. Recommended panel holes. #7 drill
.200
(.008)
2. Recommended panel holes. #10 drill
.194
(.008)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at
www.bourns.com/legal/disclaimer.pdf.
Factory Installed Panel Mount
3292
RT22/RTR22/RJ22 3250/3252
RT24/RTR24/3290
H and W Styles - 3290
X & W Styles-RT24/RTR24
6.10
(.240)
4.06
(.160)
7.62
(.300)
3.05
(.120)
6.10
(.240)
X, L and W Styles
3.05
(.120)
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTI-
ROTATION TAB
ADJ. SLOT
.243 LONG
(.010)
.064
(.003) WIDE
.064
(.003) DEEP
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTI-
ROTATION TAB
ADJ. SLOT
.243 LONG
(.010)
.064
(.003) WIDE
.064
(.003) DEEP
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTI-
ROTATION TAB
ADJ. SLOT
.243 LONG
(.010)
.064
(.003) WIDE
.064
(.003) DEEP
6.35
(.250)
10.92
(.430)
11.68
(.460)
6.35
(.250)
13.97
(.550)
6.35
(.250)
11.43
(.450)
14.99
(.590)
11.68
(.460)
.826
±
.038
(.033
±
.020)
PANEL
3.3
(.130)
MAX
11.43
(.450)
PANEL
3.3
(.130)
MAX
.826
±
.038
(.033
±
.020)
PANEL
3.3
(.130)
MAX
PANEL LAYOUT
7.37
(.290)
.200
= 7 DRILL
(.008)
10.16
(.400)
PANEL LAYOUT
PANEL LAYOUT
.200
= 7 DRILL
(.008)
7.37
(.290)
.200
= 7 DRILL
(.008)
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
NOTES:
1. Provided with lockwasher and mounting nut.
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
Notes:
1. Provided with lockwasher and
mounting nut.
Notes:
NOTES:
1. Provided with lockwasher and mounting nut.
1. Provided with lockwasher and
mounting nut.
Notes:
NOTES:
1.
Provided with lockwasher and
1.
Provided with lockwasher and mounting nut.
mounting nut.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at
www.bourns.com/legal/disclaimer.pdf.
Customer Installed Panel Mount - Unsealed
H-58P Panel Mount
SEE TABLE II FOR PANEL MOUNT PART NUMBER
H-65P Panel Mount
1/2 Inch Square
Multiturn Models
4.06
(.160)
7.62
(.300)
H-83P Panel Mount
1-1/4 Inch Rectangular
Multiturn Modules
10.31
(.406)
MAX.
Adapter for Models 3005 and 3006
The H-83P Adapter is used with Models
3005 and 3006. Order separately and
simply snap fit the trimmer in the plastic
case. The H-83P with lockwasher and
mounting nut is available in 50-piece
lots.
HEX NUT AND
LOCKWASHER
BUSHING
10-32 UNF-2A
THD.
7.95
(.313)
33.35
(1.31)
6.35
(.250)
6.35
(.250)
OPT. BEND
DOWN ANTI-
ROTATION TAB
ADJ. SLOT
.243 LONG
(.010)
.064
(.003) WIDE
.064
(.003) DEEP
BUSHING
10-32
NF-2 THD
13.97
(.550)
22.10
(.870)
7.62
(.300)
5/16-32
UNEF
THREAD
11.43
(.450)
5.54
(.218)
14.99
(.590)
10.0
(.394)
1.52
3.30
TO
(.060)
(.130)
PANEL
3.30
MAX.
(0.13)
PANEL LAYOUT
ADJ. SLOT
2.54 LONG
(.100)
.635
(.250) WIDE
.762
(.030 ) DEEP
10.16
(.400)
.200
= 7 DRILL
(.008)
ADJ. SHAFT
RECESSED 5/16
9.53
(.375)
9.53
(.375)
5.94
(.234)
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
Notes:
1. Provided with lockwasher and
NOTES:
1. Provided with lockwasher and mounting nut.
mounting nut.
2. Recommend panel holes. #10 drill (.194).
NOTES:
1. Provided with lockwasher and
1. Provided with lockwasher and mounting nut.
mounting nut.
2. Drawings shown with trimmer. Order part separately.
Notes:
Notes:
1. Drawings shown with trimmer. Order
part separately.
NOTES:
1. Drawings shown with trimmer. Order part separately.
2. Recommended panel holes. #10 drill
.194
(.008)
*Specify H82 if panel seal is required.
2. Drawings shown with trimmer. Order
part separately.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at
www.bourns.com/legal/disclaimer.pdf.
Customer Installed Panel Mount
H-114P/115P/116P Panel Mount
H-117P Panel Mount
3/8 Inch Square Multiturn Models
4.06
(.160)
3/8 Inch Square Multiturn Models
6.10
(.240)
3.05
(.120)
TABLE I
FACTORY INSTALLED
PANEL MOUNTS
STANDARD P/N
3005P-1-(RC)
3006P,Y, or W-1-(RC)
3009P or Y-1-(RC)
3057L,J,P, or Y-1-(RC)
3059L,J,P, or Y-1-(RC)
3250L or W-1-(RC)
3252L or W-1-(RC)
3290 H or W-1-(RC)
3292L,W, or X-1-(RC)
3296W or X-1-(RC)
P/N WITH
PANEL MOUNT
3005P-1-(RC) Z
3006P,Y, or W-1-(RC) Z
3009P or Y-1-(RC) Z
3057L,J,P, or Y-1-(RC) M
3059L,J,P, or Y-1-(RC) M
3250L or W-1-(RC) M
3252L or W-1-(RC) M
3290H or W-1-(RC) M
3292L,W, or X-1-(RC) M
3296W or X-1-(RC) M
6.86
(.270)
BUSHING
10-32 UNF-2A
THD.
OPT. BEND
DOWN ANTI-
ROTATION TAB
ADJ. SLOT
.244
LONG
(.096)
.0635
WIDE
(.025)
.0635
DEEP
(.025)
BUSHING
10-32 UNF-2A
THD.
ADJ. SLOT
2.44 DIA.
(.096)
.635
(.025) WIDE
.635
(.025) DEEP
6.35
(.250)
11.43
(.450)
(H-115P)
(H-116P)
10.92
(.430)
(H-114P)
6.10
(.240)
11.68
(.460)
11.68
(.460)
TABLE II
RETRO-FIT PANEL MOUNTS FOR
INSTALLATION BY CUSTOMER
STANDARD P/N
3005P-1-(RC)
3006P,Y, or W-1-(RC)
3057L,J,P, or Y-1-(RC)
3059L,J,P, or Y-1-(RC)
3250L, W, X-(RC)
3252L or W-1-(RC)
3252X-1-(RC)
3290 H or W-1-(RC)
3292L-1-(RC)
3292W OR X-1-(RC)
RT12P,Y,L
RJ12P,Y
RT22L,W, X,
RTR22L,W, X
RJ22L,W
RJ22X
RT24W /
RTR24W OR X
RJR24W OR X
ORDER PANEL MOUNT
P/N
H-83P
H-83P
H-58P* SCREW ASSY.
H-58P* SCREW ASSY.
H-65P-1*
H-65P-3*
H-65P-5*
H-114P*
H-115P*
H-116P*
H-58P* SCREW ASSY.
H-58P* SCREW ASSY.
H-65P-1*
H-65P-3*
H-65P-5*
H-114P*
H-117P*
11.68
(.460)
8.255
(.325)
(H-114P)
8.179
(.322)
(H-115P)
(H-116P)
PANEL
8.76
±
.38
(.345
±
.015)
REF.
2.54
(.100)
2.54
REF.
(.100)
3.30
MAX.
(0.13)
REF.
5.72
(.225)
PANEL LAYOUT
7.37
(.290)
5.08
= 7 DRILL
(.200)
7.62
(.300)
PANEL LAYOUT
5.08
DIA.
(.200)
.132 OPTIONAL FOR
(.005) ANTI-ROTATION NUB
1.32 OPTIONAL FOR
(.052) ANTI-ROTATION LUG
NOTES:
1. Provided with lockwasher and mounting nut.
2. Drawings
Notes:
shown with trimmer. Order part separately.
NOTES:
1. Provided with #10 spring lockwasher and hex nut.
2. Drawings shown with trimmer. Order part separately.
1. Provided with lockwasher and
mounting nut.
Notes:
1. Provided with lockwasher and
mounting nut.
*Specify H-82 if panel seal is required.
2. Drawings shown with trimmer. Order
part separately.
2. Drawings shown with trimmer. Order
part separately.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at
www.bourns.com/legal/disclaimer.pdf.
Hardware For Special Mounting Applications
H-82 Panel Seal
H-25/H-28 Stacking Straps
Models 3250, 3252 (H-25) and 3292
(H-28).
For all panel mounts with size 10-32
bushings.
4.83
(.190)
STAINLESS STEEL
CUP WASHER
A
13.21
TYP.
(.520)
B
9.35
(.368)
7.37
(.290)
1.02
(.040)
.381
(.015)
C
9.35
(.368)
.89
(.035)
4.83
(.190)
DIMENSIONS
A
B
RUBBER O RING
C
THICKNESS
H-25
.236
(.093)
.363
(.143)
1.321
(.520)
.51
(.02)
H-28
.178
(.070)
.318
(.125)
1.064
(.419)
12.70
(.500)
4.57
(.180)
23.62
(.930)
4 PLCS.
4.01
(.158)
6.35
(.250)
.325
(.013)
DIA.
2 PLCS.
To be used with the following to provide
panel seal:
H-58P
H-65P-1
H-65P-3
H-65P-5
H-114P
H-115P
H-116P
H-117P
6.35
(.250)
3.81
(.150)
15.88
(.625)
6.35
(.250)
REV. 11/17
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at
www.bourns.com/legal/disclaimer.pdf.
DIY/开源硬件专区
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
