Installation Instructions for the
700 Series Platinum RTD Temperature
Sensors
CAUTION
IMPROPER HANDLING
•
Do not remove the sensor from its original protective
packaging until it is ready to be installed.
Failure to comply with these instructions may result
in product damage.
GENERAL INFORMATION
The 700 Series is RoHS (Restriction of Hazardous
Substances) compliant (EU Directive 2002/95/EC).
LEADS
Catalog
Listing
700-*
701-*
702-*
703-*
ISSUE 1
50010925
Lead Material/Soldering Connection
Pt-clad Ni wire
End termination galvanic Sn-plated with
Ni barrier layer
SOLDERING/ASSEMBLY
For catalog listings 702-* and 703*- face-up-mounting:
Reflow soldering or wave soldering, e.g. double wave
soldering,<8 s at 235 °C.
MOUNTING DIMENSIONS (for reference only mm/[in])
700-*
701-*
1,7 ±0,15
[0.067 ±0.0059]
2,3 ±0,15
[0.091 ±0.0059]
A
B
8 ±1
[0.315 ±0.0394]
10 ±1
[0.394 ±0.0394]
10 ±1
[0.394 ±0.0394]
Ø 0,2 ±0,02
[0.008 ±0.0008]
Ø 0,2 ±0,02
[0.008 ±0.0008]
2,1 ±0,2
[0.083 ±0.0079]
0,9
+0,3
-0,2
[0.035
+0.0118]
-0.0079]
1,2 ±0,2
[0.047 ±0.0079]
0,9
+0,3
-0,2
[0.035
+0.0118]
-0.0079]
.
A
B
Applies to the following 700
-
* listings only:
700-102AAB-B00
700-102AAC-B00
Applies to all other 700
-
* listings.
Sensing and Control
700 Series Platinum RTD Temperature
Sensors
702-*
0,35 ±0,2
[0.014 ±0.0079]
0,52 ±0,05
[0.020 ±0.0020]
Issue 1
50010925
703-*
0,5 ±0,2
[0.020 ±0.0079]
0,6 ±0,05
[0.024 ±0.0020]
2,3 ±0,15
[0.091 ±0.0059]
3,25 ±0,15
[0.128 ±0.0059]
0,35 ±0,2
[0.014 ±0.0079]
1,4 ±0,15
[0.055 ±0.0059]
0,5 ±0,2
[0.020 ±0.0079]
1,65 ±0,15
[0.065 ±0.0059]
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency
stop devices or in any other application where failure
of the product could result in personal injury.
Failure to comply with these instructions could
result in death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being
free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless
agreed to otherwise by Honeywell in writing; please refer
to your order acknowledgement or consult your local
sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at its option,
without charge those items it finds defective.
The
foregoing is buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including
those of merchantability and fitness for a particular
purpose. In no event shall Honeywell be liable for
consequential, special, or indirect damages.
While we provide application assistance personally,
through our literature and the Honeywell web site, it is up
to the customer to determine the suitability of the product
in the application.
Specifications may change without notice. The
information we supply is believed to be accurate and
reliable as of this printing. However, we assume no
responsibility for its use.
SALES AND SERVICE
Honeywell serves its customers through a worldwide
network of sales offices, representatives and distributors.
For application assistance, current specifications, pricing
or name of the nearest Authorized Distributor, contact
your local sales office or:
E-mail:
info.sc@honeywell.com
Internet:
www.honeywell.com/sensing
Phone and Fax:
Asia Pacific
+65 6355-2828
+65 6445-3033 Fax
Europe
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
+1-815-235-6545 Fax
Automation and Control Solutions
Sensing and Control
Honeywell
11 West Spring Street
Freeport, Illinois 61032
www.honeywell.com/sensing
50010925-1-EN IL50 GLO Printed in USA
July 2005
© 2005 Honeywell International Inc.
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
