200621I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 30, 2013
1
DATA SHEET • SKY13299-321LF SPDT SWITCH
Table 1. SKY13299-321LF Signal Descriptions
Pin #
1
2
3
4
5
6
Note:
Name
VCTL1
GND
J1
GND
GND
GND
Ground
Description
DC control voltage.
RF port. Must be DC blocked.
Ground
Ground
Ground
Pin #
7
8
9
10
11
12
J2
GND
VCTL2
GND
RFC
GND
Name
Ground
Description
RF port. Must be DC blocked.
DC control voltage.
Ground
RF common port. Must be DC blocked.
Ground
Exposed pad must be grounded.
Table 2. SKY13299-321LF Absolute Maximum Ratings (Note 1)
Parameter
Control voltage range
RF input power @ 3.3 V, @ 25 °C (f > 700 MHz) (Note 2)
RF input power @ 5.0 V, @ 25 °C (f > 700 MHz) (Note 2)
Operating temperature
Storage temperature
V
CTL
P
IN
P
IN
T
OP
T
STG
–40
–65
Symbol
Minimum
2.75
Maximum
7
+39.5
+40.0
+85
+150
Units
V
dBm
dBm
°C
°C
Note 1:
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
Note 2:
Input power under matched conditions (50
Ω).
Defined as peak or CW. For high Peak-to-Average Ratio (PAR) signals, the highest peak should be below the maximum value shown
here.
CAUTION:
Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13299-321LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
The state of the SKY13299-321LF is determined by the logic
provided in Table 4.
Typical performance characteristics are illustrated in Figures 3 to