Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors
True Hot-Plug, Blind-Mating Mixed Signal and Power Connectors
Product Facts
■
Wide variety of contact sizes
and styles from 1 Amp
signals up to power contacts
rated at up to 200 Amps each
Sequenced contacts for
“mate-first-break-last”
operation
Floating panel-mount
connectors float up to
+/- 2 mm
High durability specific
products ranging from
100 to 1000 mate/un-mate
cycles
Customizable products
allow the freedom to add or
remove power or signal
contacts to meet specific
application requirement
Most products recognized
to US and Canadian
requirements under the
Component Recognition
program of Underwriters
Laboratories File No.
E28476
AND
®
R
■
Cable Mounted Products
■
■
■
■
C
US
Typical Applications
■
■
■
■
■
■
■
Low noise power supplies
Switch-mode power
supplies (SMPS)
Power factor-correcting
(PFC) power supplies
Systems requiring mounting
to backplane or chassis
Redundant (N + 1) power
systems
“Live” hot-plug power
supplies
All ELCON drawer
connectors in this section
are RoHS compliant
Tyco Electronics offers a
wide selection of blind-
mateable “drawer” connec-
tors to suit modular
equipment designs. The
term “drawer connector”
was created to describe a
cabinet drawer where the
connector is installed at the
back of the drawer and is
mated by closing the
drawer. Since the “drawer”
is often times made with a
somewhat loose fit — to
enable easy opening and
closing, the drawer connec-
tor must provide sufficient
self-alignment and ideally a
floating connection to the
cabinet or drawer to keep
the connection from binding.
The power drawer connec-
tors in this catalog are
divided into two separate
categories: high power
drawers and low power
drawers. Specifically, the
product line names in these
two categories are:
High Power Drawer Connectors
■
ELCON Drawer Series
Connectors
Low Power Drawer Connectors
■
AMP Drawer Series
Connectors
■
Mini Power Drawer
■
Blind-mate Drawer
Connectors
■
Hybrid Mini Drawer
Connectors
Some of the benefits of the
power drawer connectors
from Tyco Electronics are
the robustness of the
housing designs and the
durability of the contacts.
High-end applications such
as networking switches and
servers want the lowest
possible voltage drop
across the connector.
For these applications the
high conductivity screw-
machined contacts with
either gold or silver plating
offer the best performance.
The contacts are the core
of the ELCON drawer
series connectors. For cost
sensitive applications the
different hybrid drawer
connectors offer a wide
variety of shapes and sizes
aimed at keeping cost mini-
mized and still providing a
reliable separable interface.
Regardless of the applica-
tion, Tyco Electronics offers
a wide variety of power &
signal blind-mateable
drawer connectors.
Need more information?
Call Technical Support at
the numbers listed below.
Technical Support is staffed
with specialists well versed
in all Tyco Electronics
products. They can provide
you with:
■
Technical Support
■
Catalogs
■
Technical Documents
■
Product Samples
■
Tyco Electronics
Authorized Distributor
Locations
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Technical Documents
Product Specification
108-2285
Application Specification
114-13206
62
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors
True Hot-Plug, Blind-Mating Mixed Signal and Power Connectors
(Continued)
Probe-proof Double
CROWN BAND Contacts
The size #0 contacts used
in the Top Drawer, Double
Drawer, DualPower and
QuadPower connectors
are also available in a
probe-proof double
CROWN BAND version.
These contacts are spe-
cially suited for operator-
serviced power supplies
that require extra safety
protection.
Signal/Power Sequencing
All signal and some power
contacts are available in
various lengths to allow
multiple levels of sequenc-
ing, thus giving the engineer
further design flexibility.
Mating Polarization
To provide for positive
housing mating of
connectors, polarization
is provided in the form of
molded-in guide posts or
pre-installed guide pins.
Regulatory Agency
Certifications
Tyco Electronics ELCON
drawer series connectors
have been evaluated and
found to comply with the
UL1977 standard and the
CSA standard C22.2 No.
182.3-M1987.
Tyco Electronics can also
work with the customer to
obtain application-specific
regulatory certifications if
needed.
®
Cable Mounted Products
3 mm Diameter Test Probe in
Accordance with IEC 435
Protective Cap (insulator)
C
US
Wide Array of
Standard Contacts
ELCON drawer connectors
support various termination
styles, including crimp for
cable, solder tail and com-
pliant press-fit for mounting
to PCB, and internal/
external threads for termina-
tion to lugs and/or busbars.
See table below for details.
Termination
Contact Size
#20
#16
#12
#8
#4
#0
PC Tail
•
•
•
•
Press-fit
•
•
•
•
Crimp
•
•
•
•
•
•
Threaded
Internal
External
•
•
•
•
•
•
Application-Specific Designs
If none of our standard
drawer connectors
satisfies your requirements,
Tyco Electronics can
develop an ELCON con-
nector design specific to
your application. We will
Concept
Tyco Electronics engineers
work closely with the cus-
tomer to fully understand
the design requirements.
work closely with your engi-
neers to fully understand
the design requirements
and develop an intercon-
nect solution that meets
your stated needs. After the
concept and design stages,
Design
A sketch drawing of the
design concept is created
for customer review, and the
design is finalized only when
it fully meets the require-
ments of the customer.
Tyco Electronics produces
prototypes that perform
both electrically and
mechanically the same as
production parts. These
machined parts are used
for testing, regulatory
Prototypes
The design is frozen and
work on the mold tools starts.
Meanwhile, Tyco Electronics
builds prototypes that are
identical to the production
parts.
agency evaluations and
even as pre-production
components, allowing the
shortest lead time from
concept to manufacturing
in the industry.
Production
By the time the customer
is ready for production, all
requirements for release
to production, such as
qualification and regulatory
agency approval, have
been cleared.
63
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
How to Tailor Your ELCON Drawer Connector
If you selected a standard drawer connector for your appli-
cation, before placing an order you need to specify your
application-specific requirements, such as housing type,
contact loading, and termination style. Layout forms for all
standard drawer connectors, such as the one shown below,
are available online at http://www.tycoelectronics.com or
can be obtained from Tyco Electronics customer service for
Pin Assembly
1. Choose one housing from the
Pin Housing Selection Menu
table. Place
an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each pin contact you require
for each pin
assembly
in the
Qty
column of the
Pin Contact Selection Menu
table.
3. Crimp contacts are shipped uninstalled. Threaded and PCB tail
contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the
drawing: e.g., if you need a size #20 premate PCB tail standard con-
tact to be installed in contact position #10, write “Q” in circle #10.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
this purpose. Complete a form for the pin and socket side
of your connector as indicated in the instructions and fax it
to your Tyco Electronics sales engineer. We will issue a
unique part number specific to your configuration, which
you can then use to place orders. Samples and customer
drawings are also available upon request.
ENTER CUSTOMER INFORMATION
Company
Contact Name
Telephone
Email Address
I am:
❏
End user
❏
Contract manufacturer (end user:
Signature
Today’s Date
Annual Quantity Required
Location
Title
Fax
Cable Mounted Products
)
Submit to your local Tyco Electronics Sales Engineer.
G1
G2
Pin Housing Selection Menu
Part Number
1648183-1
Description
Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
Check
One
1
2
Size #0
Pin Contact Selection Menu
Ref. Part Number
Termination Style & Pin Length
Qty.
A = 1766811-1
Crimp
B = 1766819-1
Probe Proof, crimp
C = 1766230-1
1/4-20 Internal Thread
D = 1766274-1
M6 x 1 Internal Thread
E = 1766269-1
Probe Proof, 1/4-20 Internal Thread
#0
F = 1766275-1
Probe Proof, M6 x 1 Internal Thread
G = 1766268-1
1/4-20 External Thread
H = 1766231-1
M6 x 1 External Thread
J = 1766270-1
Probe Proof, 1/4-20 External Thread
K = 1766276-1
Probe Proof, M6 x 1 External Thread
L = 1650155-1
Crimp, standard
M = 1650161-1
Crimp, premate
N = 1650162-2
Crimp, postmate
#20
P = 1650283-1
PCB tail, standard
Q = 1650065-1
PCB tail, premate
R = 1650226-1
PCB tail, postmate
S = 1766196-1
Crimp, standard
T = 1766198-1
Crimp, premate
U = 1766199-2
Crimp, postmate
#16
V = 1766222-1
PCB tail, standard
W = 1766223-1
PCB tail, premate
X = 1766818-1
PCB tail, postmate
Y = 1766193-1
Crimp, standard
Z = 1766195-1
Crimp, premate
AA = 1766196-1
Crimp, postmate
#12
AB = 1766245-1
PCB tail, standard
AC = 1766250-1
PCB tail, premate
AD = 1766249-1
PCB tail, postmate
AE = 1650153-2
Crimp, standard, Hot-Plug
AF = 1650156-2
Crimp, premate, Hot-Plug
#12 Hot-
Plug
AG = 1650060-2
PCB tail, standard, Hot-Plug
AH = 1650074-3
PCB tail, premate, Hot-Plug
Crimp and Threaded contacts are removable. PCB tail contacts are non-removable.
Size
3
11
19
27
4
12
20
28
5
13
21
29
6
14
22
30
7
15
23
31
8
16
24
32
9
17
25
33
10
18
26
34
Size #20
35
36
37
38
39
40
Size #16
41
42
43
44
45
46
47
48
49
Size #12 or
#12HP
50
51
52
G3
G4
Float-Mount Shoulder Screw
Top Assembly Part Number
Assigned by Tyco Electronics
Part Number
1650399-1
1650401-1
Description
Screw, No 10-32 UNC 2A
Screw, M5 x 0.8
Qty.
64
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
ELCON Drawer Connector Mounting
All ELCON drawer series connectors can be fix-mounted or float-mounted using the designated shoulder screws to allow
improved gatherability for blind-mating of the connector. Panel cut out dimensions are shown on the customer drawing
specific to your ELCON drawer connector.
Panel Float Mounting
When float-mounting to a panel or chassis, use the stainless steel shoulder screws specified in the layout sheet or
customer drawing specific to your ELCON drawer connector. Shown in the sketch below is an example of how the
Top Drawer connector is float-mounted to a panel.
Cable Mounted Products
Float-Mount of Top Drawer (Example)
Mounting
Flange
Panel (Ref)
Shoulder
Screw
Guide Pin
Screw Description
#10-32 UNF 2A Thread
M5 x 0.8 Metric Thread
#8-32 UNF 2A Thread
#6-32 UNF 2A Thread
M4 x 0.7 Metric Thread
Part Number
1650399-1
1650401-1
1650402-1
1650106-1
1650589-1
Used On
Top and Double Drawer, Dual and QuadPower,
In-Line QuadPower, W5 Drawer
All Other Drawers
Panel Fix Mounting
As a rule of thumb, ELCON drawer connectors can be fix-mounted to a panel, in two ways: (1) by attaching a screw
through the top and bottom mounting flange of the housing; or (2) by attaching a screw into a threaded guide pin (for
those connectors that have one). An example of each case is shown in the sketches below.
Screw Through Mounting Flange of Housing
Fix to the panel by attaching a commercially available
screw and a washer through the top and bottom mounting
flange of the housing.
Screw Into Thread of Guide Pin (When Applicable)
You can optionally fix-mount housings that have a guide
pin by attaching a commercially available screw and
washer into the thread on the back of the guide pin, as
shown in the figures below.
Commercially
available screw
and washer
Commercially
available screw
and washer
Internally threaded
(6-32) guide pin
Guide pin
#6-32 or
M3 x 0.5 screw
.25
[6.35]
Note:
All part numbers are RoHS compliant.
65
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Power Connectors & Interconnection Systems
ELCON Drawer Connector Mounting
(Continued)
Strain Relief and Wire Dress
If required, wires can be bundled together and supported
with cable ties. Wires must not be stretched or confined in
any way that would restrict the floating action of the con-
nectors. Therefore, the wires must remain perpendicular to
the connector and avoid an excessively sharp bend
radius. The minimum recommended distance for the cable
tie, and the minimum bend radius of a wire bundle are
shown in the figure to the right.
Cable Mounted Products
PCB Fix Mounting
When mounting to a PC board, the connector standoffs must be seated on the board. Hold-downs are recommended to
provide stability during the soldering procedure. PCB-mount hole patterns are shown on the customer drawing specific
to your ELCON drawer connector.
Flush PCB-Mount Drawer Connectors
.020 [0.51]
Drawer Connectors with Cabled AC IN
PC Board (Ref)
Wire
Connector
Standoffs
.020 [0.51]
Connector Engagement
To provide for proper mating of the connector when the power supply unit is fully engaged into the system, the gap
between the pin and socket (shown as dimension “A” in the sketch below) must be within the limit specified in the
customer drawing for your ELCON drawer connector. Failure to meet this requirement may compromise contact wipe.
Refer to the customer drawing for details. ELCON drawer connectors are polarized and will only mate in the correct
orientation (see sketch below).
Rib in Guide
Post Cavity
Notch in
Guide Post
66
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
