PRODUCT SPECIFICATION
1.0 SCOPE
This specification is intended to define the mechanical, electrical and environmental requirements for
the SL .100” (2.54) pitch modular, single row wire-to-board and wire-to-wire system.
SL is designed for high density signal applications. The system includes: low profile latching vertical
and right angle headers; low profile housings for male and female crimp terminals; pre-assembled,
single piece pin and receptacle connectors for Insulation Displacement Technology (IDT); panel
mounts for modular wire-to-wire remote interconnections; and SL offers design flexibility and
automated harness-making capabilities when combined with our tooling.
2.0
PRODUCT DESCRIPTION:
2.1 The following Series are covered by this product specification:
70021, male, crimp terminal
70058, female box, crimp terminal
71851, female box, high force crimp terminal
70066 & 70107, single row, crimp housing
70450 & 74130, dual row, crimp housing
70400, female, single row, insulation displacement, connector assembly
70475 & 71178 ,male, single row, insulation displacement, connector assembly
Headers:
70541, single row, .120” pocket, wire-to-board, shrouded header, vertical, split peg
70543, single row, .120” pocket, wire-to-board, shrouded header, vertical
70545, single row, .120” pocket, wire-to-board, shrouded header, vertical, tri-peg
70546, single row, .120” pocket, wire-to-board, shrouded header, vertical, tri-peg
70551, single row, .120” pocket, wire-to-board, shrouded header, right angle, split peg
70553, single row, .120” pocket, wire-to-board, shrouded header, right angle
70555, single row, .120” pocket, wire-to-board, shrouded header, right angle, tri-peg
70556, single row, .120” pocket, wire-to-board, shrouded header, right angle, tri-peg
70563, single row, .180” pocket, wire-to-board, shrouded header, vertical
70564, single row, .180” pocket, wire-to-board, shrouded header, vertical
70566, single row, .180” pocket, wire-to-board, shrouded header, vertical, tri-peg
70571, single row, .180” pocket, wire-to-board, shrouded header, right angle, board snaps
70575, single row, .180” pocket, wire-to-board, shrouded header, right angle, tri-peg
70634, single row, .120” pocket, wire-to-board, shrouded header, right angle, tri-peg, SMT
71164, single row, .120” pocket, wire-to-board, shrouded header, voided circuits
74095, single row, .120” pocket, wire-to-board, shrouded header, vertical, compliant pin
74098, single row, .120” pocket, wire-to-board, shrouded header, right angle, split peg, SMT
74099, single row, .120” pocket, wire-to-board, shrouded header, vertical, SMT
74105, single row, .120” pocket, wire-to-board, shrouded header, right angle, SMT
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2013-1367
DATE:
2012/10/15
TITLE:
N
PRODUCT SPECIFICATION
SINGLE ROW – STACKABLE
LINEAR (SL) CONNECTOR SYSTEM
CHECKED BY:
SHEET No.
2
of
10
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-70400
MMSTROH
MKIPPER
FSMITH
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
PRODUCT SPECIFICATION
2.2 DIMENSIONS, MATERIALS AND SPECIFICATIONS:
2.2.1
Mating Pin Height
2.2.1.1
Maximum mating pin height: .320” (8.13 mm)
2.2.1.2
Minimum mating pin height: .200” (5.08 mm)
2.2.2
Centerline spacing (pitch): .100” (2.54 mm)
2.2.3
Wire Sizes:
For IDT: #22 - #28 AWG stranded wire, with an insulation diameter of .053”
(1.35 mm) max.
For Crimp: #22-#36 AWG wire. See Termination Application Specs for insulation
diameter requirements
2.2.4
Molex cable: 7307, 7767, 8996, 8997, 24226, 24241, 24369 and 24389.
2.2.5
Termination Method:
2.2.5.1
Crimp (70021, 70058, 71851)
2.2.5.2
IDT (70400, 70475)
2.2.5.3
Header
2.2.5.3.1
Thru Hole: Wave Solder
2.2.5.3.2
SMT: Reflow
2.2.5.3.3
Compliant: N/A
2.2.6
Housings:
(70066, 70450, 70107, 74130): Black Glass Filled Polyester, UL 94V-0
Header: Black Glass Filled Polyester, UL 94V-0
2.2.7
Terminals: (70021, 70058, 71851): Phosphor Bronze
2.2.8
Pins: Phosphor Bronze
2.2.9
Plating: Gold and Tin
2.2.9.1
Gold: 30 microinches minimum Gold in select area over Nickel overall
with 75 microinches Tin in select area over Nickel overall
or
Gold: 15 microinches minimum Gold in select area over Nickel overall
with 75 microinches Tin in select area over Nickel overall
2.2.9.2
Tin: 150 microinches minimum Tin over Nickel overall.
See the appropriate Sales Drawing(s) for additional information on dimensions, materials, platings,
and markings.
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2013-1367
DATE:
2012/10/15
TITLE:
N
PRODUCT SPECIFICATION
SINGLE ROW – STACKABLE
LINEAR (SL) CONNECTOR SYSTEM
CHECKED BY:
SHEET No.
3
of
10
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-70400
MMSTROH
MKIPPER
FSMITH
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
PRODUCT SPECIFICATION
5.0 PERFORMANCE:
Note: For Specifications of individual Terminals and un-mated Headers please see their
respective Product Specs:
PS-70021 –
Male, crimp terminal
PS-70058 –
Female box, crimp terminal
PS-71851 –
Female box, high force crimp terminal
PS-70541 –
Vertical and Right Angle Headers
PS-70495 –
Compliant Header
5.1 ELECTRICAL PERFORMANCE:
Test Condition
Requirement
Mate Connectors with a maximum
30
milliohm Maximum
Contact Resistance
voltage of 20mV and a current of 100
(Low Level)
Initial
mA.
Mate Connectors with a voltage of 500
Insulation
VDC between adjacent terminals and
10000
Megohms Minimum
Resistance
between terminals and ground.
Mate Connectors with a voltage of
1500 VAC for 1 minute between
adjacent terminals and between
terminals and ground.
Dielectric
Withstanding
No breakdown
Or
Voltage
Mate Connectors with a voltage of 500
VDC for 1 minute between adjacent
terminals
Mate Connectors with a current of 3
amps and the open circuit voltage set
30
millivolt Maximum
to not exceed 15 VDC. Power is
Initial
applied for a minimum of 30 seconds
before the first measurement
Subject mated connectors to a total of
30
millivolt Maximum
8 hours of simple harmonic motions.
(Apply 4 hours in the Z axis and 2
Initial
hours in each of the X and Y axes).
&
60
millivolt Maximum
Vary the frequency uniformly from 10
Hz to 50 Hz traversed continuously in After Endurance Exposure
8 minutes
Item
Voltage Drop
Voltage Drop after
Vibration
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2013-1367
DATE:
2012/10/15
TITLE:
N
PRODUCT SPECIFICATION
SINGLE ROW – STACKABLE
LINEAR (SL) CONNECTOR SYSTEM
CHECKED BY:
SHEET No.
5
of
10
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-70400
MMSTROH
MKIPPER
FSMITH
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
综合技术交流
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
