SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
Surface Mount T
RANS
Z
ORB®
Transient Voltage Suppressors
FEATURES
Low profile package
Ideal for automated placement
Glass passivated chip junction
Available in uni-directional and bi-directional
Available
Excellent clamping capability
Very fast response time
Low incremental surge resistance
Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
•
•
•
•
•
•
•
•
SMC (DO-214AB)
PRIMARY CHARACTERISTICS
V
BR
uni-directional
V
BR
bi-directional
V
WM
P
PPM
P
D
I
FSM
(uni-directional only)
T
J
max.
Polarity
Package
6.40 V to 231 V
6.40 V to 231 V
5.0 V to 188 V
1500 W
6.5 W
200 A
150 °C
Uni-directional, bi-directional
SMC (DO-214AB)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case:
SMC (DO-214AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
Base P/NHE3 - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3 - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
Terminals:
matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
Polarity:
for uni-directional types the band denotes cathode
end, no marking on bi-directional types
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g. SMCJ188CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS
(T
A
= 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 μs waveform
(1)(2)
Peak pulse current with a 10/1000 μs waveform
(1)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only
Power dissipation
on infinite heatsink, T
A
= 50 °C
Operating junction and storage temperature range
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2.
A
(2)
Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal
(2)
SYMBOL
P
PPM
I
PPM
I
FSM
P
D
T
J
, T
STG
VALUE
1500
See next table
200
6.5
-55 to +150
UNIT
W
A
A
W
°C
Revision: 14-Jul-17
Document Number: 88394
1
For technical questions within your region:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
BREAKDOWN
VOLTAGE
V
BR
AT I
T (1)
(V)
MIN.
MAX.
6.40
7.07
6.67
7.37
7.22
7.98
7.78
8.60
8.33
9.21
8.89
9.83
9.44
10.4
10.0
11.1
11.1
12.3
12.2
13.5
13.3
14.7
14.4
15.9
15.6
17.2
16.7
18.5
17.8
19.7
18.9
20.9
20.0
22.1
22.2
24.5
24.4
26.9
26.7
29.5
28.9
31.9
31.1
34.4
33.3
36.8
36.7
40.6
40.0
44.2
44.4
49.1
47.8
52.8
50.0
55.3
53.3
58.9
56.7
62.7
60.0
66.3
64.4
71.2
66.7
73.7
71.1
78.6
77.8
86.0
83.3
92.1
86.7
95.8
94.4
104
100
111
111
123
122
135
133
147
144
159
167
185
178
197
189
209
209
231
MAXIMUM
REVERSE
LEAKAGE
AT V
WM
I
D
(μA)
(3)
1000
1000
500
200
100
50
20
10
5.0
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
MAXIMUM
PEAK PULSE
SURGE
CURRENT
I
PPM
(A)
(2)
163.0
145.6
133.9
125.0
116.3
110.3
104.2
97.4
88.2
82.4
75.4
69.8
64.7
61.5
57.7
54.3
51.4
46.3
42.3
38.6
35.6
33.0
31.0
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.9
10.9
10.3
9.3
8.5
7.8
7.2
6.2
5.8
5.5
4.6
MAXIMUM
CLAMPING
VOLTAGE AT
I
PPM
V
C
(V)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
126
137
146
162
177
193
209
243
259
275
328
ELECTRICAL CHARACTERISTICS
(T
A
= 25 °C unless otherwise noted)
DEVICE MARKING
DEVICE TYPE
CODE
MODIFIED
“J” BEND LEAD
UNI
BI
(+)
SMCJ5.0A
(5)
GDE
GDE
(+)
SMCJ6.0A
GDG
GDG
(+)
SMCJ6.5A
GDK
BDK
(+)
SMCJ7.0A
GDM
GDM
(+)
SMCJ7.5A
GDP
BDP
(+)
SMCJ8.0A
GDR
BDR
(+)
SMCJ8.5A
GDT
BDT
(+)
SMCJ9.0A
GDV
BDV
(+)
SMCJ10A
GDX
BDX
(+)
SMCJ11A
GDZ
GDZ
(+)
SMCJ12A
GEE
BEE
(+)
SMCJ13A
GEG
GEG
(+)
SMCJ14A
GEK
BEK
(+)
SMCJ15A
GEM
BEM
(+)
SMCJ16A
GEP
GEP
(+)
SMCJ17A
GER
GER
(+)
SMCJ18A
GET
BET
(+)
SMCJ20A
GEV
BEV
(+)
SMCJ22A
GEX
BEX
(+)
SMCJ24A
GEZ
BEZ
(+)
SMCJ26A
GFE
BFE
(+)
SMCJ28A
GFG
BFG
(+)
SMCJ30A
GFK
BFK
(+)
SMCJ33A
GFM
BFM
(+)
SMCJ36A
GFP
BFP
(+)
SMCJ40A
GFR
BFR
(+)
SMCJ43A
GFT
BFT
(+)
SMCJ45A
GFV
GFV
(+)
SMCJ48A
GFX
GFX
(+)
SMCJ51A
GFZ
GFZ
(+)
SMCJ54A
GGE
GGE
(+)
SMCJ58A
GGG
GGG
(+)
SMCJ60A
GGK
GGK
(+)
SMCJ64A
GGM
GGM
(+)
SMCJ70A
GGP
GGP
(+)
SMCJ75A
GGR
GGR
(+)
SMCJ78A
GGT
GGT
(+)
SMCJ85A
GGV
GGV
(+)
SMCJ90A
GGX
GGX
(+)
SMCJ100A
GGZ
GGZ
(+)
SMCJ110A
GHE
GHE
(+)
SMCJ120A
GHG
GHG
(+)
SMCJ130A
GHK
GHK
(+)
SMCJ150A
GHM
GHM
(+)
SMCJ160A
GHP
GHP
(+)
SMCJ170A
GHR
GHR
SMCJ188A
GHS
GHS
TEST
CURRENT
I
T
(mA)
10
10
10
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
STAND-OFF
VOLTAGE
V
WM
(V)
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
188
Notes
(1)
Pulse test: t
≤
50 ms
p
(2)
Surge current waveform per fig. 3 and derate per fig. 2
(3)
For bi-directional types having V
WM
of 10 V and less, the I
D
limit is doubled
(4)
All terms and symbols are consistent with ANSI/IEEE C62.35
(5)
For the bi-directional SMCJ5.0CA, the maximum V
BR
is 7.25 V
(6)
V = 3.5 V at I = 100 A (uni-directional only)
F
F
(+)
Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number
E136766 for both uni-directional and bi-directional devices
Revision: 14-Jul-17
Document Number: 88394
2
For technical questions within your region:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
SYMBOL
R
θJA
R
θJL
VALUE
75
15
UNIT
°C/ W
THERMAL CHARACTERISTICS
(T
A
= 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance, junction to ambient air
(1)
Typical thermal resistance, junction to lead
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION
(Example)
PREFERRED P/N
SMCJ5.0A-E3/57T
SMCJ5.0A-E3/9AT
SMCJ5.0AHE3/57T
(1)
SMCJ5.0AHE3/9AT
(1)
SMCJ5.0A-M3/57T
SMCJ5.0A-M3/9AT
SMCJ5.0AHM3/H
(1)
SMCJ5.0AHM3/I
(1)
(1)
UNIT WEIGHT (g)
0.211
0.211
0.211
0.211
0.211
0.211
0.211
0.211
PREFERRED PACKAGE CODE
57T
9AT
57T
9AT
57T
9AT
H
I
BASE QUANTITY
850
3500
850
3500
850
3500
850
3500
DELIVERY MODE
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
Note
AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(T
A
= 25 °C unless otherwise noted)
Peak Pulse Power (P
PP
) or Current (I
PP
)
Derating in Percentage, %
100 µs
1.0 ms
10 ms
100
100
P
PPM
- Peak Pulse Power (kW)
75
10
50
1
0.31 x 0.31" (8.0 x 8.0 mm)
Copper pad areas
0.1
0.1 µs
25
0
0
25
50
75
100
125
150
175
200
1.0 µs
10 µs
t
d
- Pulse Width (s)
T
J
- Initial Temperature (°C)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Revision: 14-Jul-17
Document Number: 88394
3
For technical questions within your region:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
100
150
I
PPM
- Peak Pulse Current, % I
RSM
t
r
= 10 µs
Peak value
I
PPM
Transient Thermal Impedance (°C/W)
T
J
= 25 °C
Pulse width (t
d
)
is defined as the point
where the peak current
decays to 50 % of I
PPM
100
10
Half value -
I
PPM
50
I
PP
2
10/1000 µs waveform
as defined by R.E.A.
t
d
1.0
0
0
1.0
2.0
3.0
4.0
0.1
0.001
0.01
0.1
1
10
100
1000
t - Time (ms)
t
p
- Pulse Duration (s)
Fig. 3 - Pulse Waveform
Fig. 5 - Typical Transient Thermal Impedance
20 000
200
Peak Forward Surge Current (A)
C
J
- Junction Capacitance (pF)
10 000
Measured at
zero bias
100
1000
V
R
, measured at
Stand-off voltage V
WM
100
Uni-directional
Bi-directional
10
1
10
100
400
T
J
= 25 °C
f = 1.0 MHz
V
sig
= 50 mVp-p
T
J
= T
J
max.
8.3 ms single half sine-wave
10
1
10
100
V
WM
- Reverse Stand-Off Voltage (V)
Number of Cycles at 60 Hz
Fig. 4 - Typical Junction Capacitance Uni-Directional
Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current
Uni-Directional Use On
PACKAGE OUTLINE DIMENSIONS
in inches (millimeters)
SMC (DO-214AB)
Cathode Band
0.185 (4.69)
MAX.
Mounting Pad Layout
0.126 (3.20)
0.114 (2.90)
0.246 (6.22)
0.220 (5.59)
0.126 (3.20)
MIN.
0.280 (7.11)
0.260 (6.60)
0.012 (0.305)
0.006 (0.152)
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
MIN.
0.320 REF.
0.060 (1.52)
0.030 (0.76)
0.320 (8.13)
0.305 (7.75)
0.008 (0.2)
0 (0)
Revision: 14-Jul-17
Document Number: 88394
4
For technical questions within your region:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
ARM技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
