DATA SHORT
To request the full datasheet, please visit
www.intersil.com/products/EL1528
OBSOLETE PRODUCT
NO RECOMMENDED REPLACEMENT
Dual Channel Differential DSL Line Driver
contact our Technical Support Center at
1-888-INTERSIL or www.intersil.com/tsc
EL1528
FN7002
Rev 1.00
September 21, 2004
The EL1528 is a dual channel differential amplifier designed
for driving full rate ADSL signals at very low power
dissipation. The high drive capability of 450mA makes this
driver ideal for both CAP and DMT designs. It contains two
pairs of wideband, high-voltage, current mode feedback
amplifiers optimized for low power consumption in DSL
systems.
These drivers achieve an MTPR distortion measurement of
better than 70dB, while consuming typically 5mA per DSL
channel of total supply current. This supply current can be
set using a resistor on the I
ADJ
pin. Two other pins (C
0
& C
1
)
can also be used to adjust supply current to one of four pre-
set modes (full-I
S
, 3/4-I
S
, 1/2-I
S
, and full power-down). The
EL1528 operates on ±5V to ±12V supplies and retains its
bandwidth and linearity over the complete supply range.
The device is supplied in a thermally-enhanced 20-pin
HTSSOP and the small footprint (4x5mm) 24-pin QFN
packages. The EL1528 is specified for operation over the full
-40°C to +85°C temperature range.
Features
• Pb-free available
• 450mA output drive capability
• 44.4V
P-P
differential output drive into 100
• -75dBc THD @ 500kHz 16V
P-P
• MTPR of -70dB
• Operates down to 2mA per amplifier supply current
• Current control pins
• Channel separation
- 80dB @ 500kHz
- 75dB @ 1MHz
• Pb-free available (RoHS compliant)
Applications
• Dual port ADSL line drivers
• HDSL line drivers
• VDSL line drivers
Pinouts
EL1528
(24-PIN QFN)
TOP VIEW
20 VOUTA
24 C1AB
23 C0AB
EL1528
(20-PIN HTSSOP)
TOP VIEW
C0AB 1
C1AB 2
19 VINA-
18 VINB-
17 VOUTB
VINA+ 3
VINB+ 4
GND 5
IADJ 6
VINC+ 7
VIND+ 8
C1CD 9
C0CD 10
THERMAL
PAD
20 VS-
19 VOUTA
18 VINA-
17 VINB-
16 VOUTB
15 VOUTC
14 VINC-
13 VIND-
12 VOUTD
11 VS+
22 VS-
VINA+ 1
VINB+ 2
GND 3
IADJ 4
NC 5
VINC+ 6
VIND+ 7
VS+ 10
C1CD 8
C0CD 9
NC 12
NC 11
THERMAL
PAD
21 NC
16 VOUTC
15 VINC-
14 VIND-
13 VOUTD
FN7002 Rev 1.00
September 21, 2004
Page 1 of 2
EL1528
© Copyright Intersil Americas LLC 2002-2004. All Rights Reserved.
All trademarks and registered trademarks are the property of their respective owners.
For additional products, see
www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at
www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such
modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are
current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its
subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see
www.intersil.com
FN7002 Rev 1.00
September 21, 2004
Page 2 of 2
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
