Type 171
Radial Leaded Metallized Polypropylene
Radial Box Metallized Polypropylene Capacitors
Type 171 radial leaded, box, metallized polypropylene
capacitors are available in five pitch sizes and have a
flame retardant case and epoxy encapsulant that meets
UL94V-0. The Type 171 is an excellent choice for
applications requiring low dielectric losses, high in-
sulation resistance in an AC or DC environment. The
polypropylene direlectric gives this capacitor excellent
pulse rise time (dv/dt) performance.
Highlights
High dv/dt
Low leakage
Radial leaded (7.5, 10, 15, 22.5, 27.5 mm pitch)
Flame retardant case and encapsulant meets
UL94V-0
•
Non-inductively wound
RoHS Compliant
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
Dielectric Withstand Voltage:
Dissipation Factor (DF):
0.0022 to 3.3 µF
160 to 630 Vdc (90 to 250 Vac, 60 Hz)
±5%, ±10%, ±20%
–55 ºC to +105 ºC (
derate linearly to 50% rated
1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC
tgd x 10
–4
at +25 ºC ±5 ºC
kHz
1
10
100
C
≤0.1
µF
0.1 µF <C ≤1 µF
≤6
≤6
≤10
≤20
≤30
—
C >1 µF
≤6
—
—
•
•
•
•
Specifications
voltage from 85 ºC to 105 ºC)
Insulation Resistance:
100,000 MΩ x µF, 200,000 MΩ Min.
Self Inductance:
2 mm lead length - total self inductance
Pitch (mm)
L (nH) ≈
7.5
8
10
9
15
22.5
18
27.5
18
Life Test:
Damp Heat Test:
Soldering:
Long Term Storage Stability:
Maximum Pulse Rise Time dv/dt (V/µ):
10
2000 hrs @ 85 ºC 1.25 x Vn
95% RH @ +40 ºC for 56 days
260 ºC ±5 ºC for 10 s ±1 s
ΔC/C ≤ ±0.5% after 2 years
Lead Spacing (Pitch)
Vn
160
250
400
630
7.5
5.5
15
35
55
10
4
11
20
30
15
2
7
10
15
22.5
1.5
4
5.5
8
27.5
1
3
5
7
If the working voltage (V) is less than the nominal voltage (Vn), the capaci-
tor can work at higher dv/dt . In this case, the maximum value allowed
is obtained by multiplying the above value (See table dv/dt) with the ratio
Vn/V
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 171
Radial Leaded Metallized Polypropylene
Outline Drawing
L
Max
H
Max
.
217 ±.039
Max
T
(5.5 ±1.0 mm)
S
±0.016
(±0.4 mm)
Ratings
Cap
(µF)
Catolog
Part Number
L Max
0.413 (10.5)
0.413 (10.5)
0.512 (13.0)
0.512 (13.0)
0.512 (13.0)
0.512 (13.0)
0.709 (18.0)
0.709 (18.0)
0.709 (18.0)
1.043 (26.5)
1.043 (26.5)
1.043 (26.5)
1.26 (32.0)
1.26 (32.0)
0.413 (10.5)
0.413 (10.5)
0.512 (13.0)
0.512 (13.0)
0.512 (13.0)
0.512 (13.0)
T Max
0.157 (4.0)
0.157 (4.0)
0.157 (4.0)
0.197 (5.0)
0.197 (5.0)
0.197 (5.0)
0.236 (6.0)
0.236 (6.0)
0.236 (6.0)
0.197 (5.0)
0.236 (6.0)
0.295 (7.5)
0.236 (6.0)
0.335 (8.5)
Ød
±0.003
(±0.076 mm)
RoHS Compliant
Inches (mm)
H Max
0.374 (9.5)
0.374 (9.5)
0.374 (9.5)
0.433 (11.0)
0.433 (11.0)
0.433 (11.0)
0.472 (12.0)
0.472 (12.0)
0.472 (12.0)
0.433 (11.0)
0.472 (12.0)
0.531 (13.5)
0.591 (15.0)
0.669 (17.0)
S (Pitch)
0.295 (7.5)
0.295 (7.5)
0.394 (10)
0.295 (7.5)
0.394 (10.0)
0.295 (7.5)
0.394 (10.0)
0.295 (7.5)
0.394 (10)
0.591 (15.0)
0.591 (15.0)
0.591 (15.0)
0.886 (22.5)
0.886 (22.5)
0.886 (22.5)
1.083 (27.5)
1.083 (27.5)
0.295 (7.5)
0.295 (7.5)
0.394 (10)
0.394 (10)
0.394 (10)
0.394 (10)
Ød
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
Not applicable. These
capacitance values are not
0.024 (0.6) customarily used in switched-
0.024 (0.6)
mode power supplies
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.024 (0.6)
0.024 (0.6)
Not applicable. These
0.024 (0.6) capacitance values are not
0.024 (0.6) customarily used in switched-
mode power supplies
0.024 (0.6)
0.024 (0.6)
37
33
26
20
18
16
3.7
4.1
5.5
6.1
6.3
7.4
3.1
3.5
4.7
5.1
5.7
6.4
1.4
1.6
2.6
3.1
3.3
3.6
ESR (mΩ)
IRMS (Amps)
20 kHz to
100 kHz 25 ºC 45 ºC 85 ºC
160 Vdc / 90 Vac 60 Hz
0.033 171333*160B-F
0.047 171473*160B-F
0.047 171473*160C-F
0.068 171683*160D-F
0.1
0.1
0.15
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
171104*160E-F
171154*160E-F
171224*160F-F
171334*160G-F
171474*160H-F
171684*160L -F
171105*160N-F
171155*160O-F
171225*160P-F
171335*160Q-F
0.068 171683*160C7-F 0.413 (10.5)
171104*160C7-F 0.413 (10.5)
171154*160D7-F 0.413 (10.5)
0.394 (10.0) 0.748 (19.0)
0.433 (11.0) 0.787 (20.0)
0.512 (13.0) 0.886 (22.5)
0.157 (4.0)
0.157 (4.0)
0.157 (4.0)
0.157 (4.0)
0.197 (5.0)
0.236 (6.0)
0.374 (9.5)
0.374 (9.5)
0.374 (9.5)
0.374 (9.5)
0.433 (11.0)
0.472 (12.0)
250 Vdc / 90 Vac 60 Hz
0.015 171153*250B-F
0.022 171223*250B-F
0.022 171223*250C-F
0.033 171333*250C-F
0.047 171473*250D-F
0.068 171683*250E-F
* indicates capacitance tolereance, J = ±5%, K = ±10%, M = ±20%
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 171
Radial Leaded Metallized Polypropylene
Ratings
Cap
(µF)
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
0.0068
0.010
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
0.0022
0.0022
0.0033
0.0033
0.0047
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
Catolog
Part Number
171104*250F-F
171154*250G-F
171224*250H-F
171334*250L-F
171474*250M-F
171684*250Q-F
171105*250P-F
171155*250Q-F
171682*400B-F
171103*400B-F
171103*400C-F
171153*400D-F
171223*400D-F
171333*400E-F
171473*400F-F
171683*400G-F
171104*400H-F
171154*400I-F
171224*400N-F
171334*400O-F
171474*400P-F
171684*400Q-F
171222*630B-F
171222*630C-F
171332*630B-F
171332*630C-F
171472*630B-F
171472*630C-F
171682*630D-F
171103*630D-F
171153*630E-F
171223*630F-F
171333*630G-F
171473*630H-F
171683*630I-F
171104*630N-F
171154*630O-F
171224*630P-F
171334*630Q-F
Inches (mm)
L Max
0.709 (18.0)
0.709 (18.0)
0.709 (18.0)
1.043 (26.5)
1.043 (26.5)
1.26 (32.0)
1.26 (32.0)
1.26 (32.0)
0.413 (10.5)
0.413 (10.5)
0.512 (13.0)
0.512 (13.0)
0.512 (13.0)
0.512 (13.0)
0.709 (18.0)
0.709 (18.0)
0.709 (18.0)
0.709 (18.0)
1.043 (26.5)
1.043 (26.5)
1.26 (32.0)
1.26 (32.0)
0.413 (10.5)
0.512 (13.0)
0.413 (10.5)
0.512 (13.0)
0.413 (10.5)
0.512 (13.0)
0.512 (13.0)
0.512 (13.0)
0.512 (13.0)
0.709 (18.0)
0.709 (18.0)
0.709 (18.0)
0.709 (18.0)
1.043 (26.5)
1.043 (26.5)
1.26 (32.0)
1.26 (32.0)
H Max
S (Pitch)
250 Vdc / 90 Vac 60 Hz
0.197 (5.0) 0.433 (11.0) 0.591 (15.0)
0.236 (6.0) 0.472 (12.0) 0.591 (15.0)
0.295 (7.5) 0.531 (13.5) 0.591 (15.0)
0.236 (6.0) 0.591 (15.0) 0.886 (22.5)
0.276 (7.0) 0.650 (16.5) 0.886 (22.5)
0.512 (13.0) 0.886 (22.5) 1.083 (27.5)
0.433 (11.0) 0.787 (20.0) 1.083 (27.5)
0.512 (13.0) 0.886 (22.5) 1.083 (27.5)
400 Vdc / 220 Vac 60 Hz
0.157 (4.0) 0.374 (9.5)
0.295 (7.5)
0.157 (4.0) 0.374 (9.5)
0.295 (7.5)
0.157 (4.0) 0.374 (9.5) 0.394 (10.0)
0.197 (5.0) 0.433 (11.0) 0.394 (10.0)
0.197 (5.0) 0.433 (11.0) 0.394 (10.0)
0.236 (6.0) 0.472 (12.0) 0.394 (10.0)
0.197 (5.0) 0.433 (11.0) 0.591 (15.0)
0.236 (6.0) 0.472 (12.0) 0.591 (15.0)
0.295 (7.5) 0.531 (13.5) 0.591 (15.0)
0.335 (8.5) 0.571 (14.5) 0.591 (15.0)
0.335 (8.5) 0.669 (17.0) 0.886 (22.5)
0.394 (10.0) 0.748 (19.0) 0.886 (22.5)
0.433 (11.0) 0.787 (20.0) 1.083 (27.5)
0.512 (13.0) 0.886 (22.5) 1.083 (27.5)
630 Vdc / 250 Vac 60 Hz
0.157 (4.0) 0.374 (9.5)
0.295 (7.5)
0.157 (4.0) 0.374 (9.5) 0.394 (10.0)
0.157 (4.0) 0.374 (9.5)
0.295 (7.5)
0.157 (4.0) 0.374 (9.5) 0.394 (10.0)
0.157 (4.0) 0.374 (9.5)
0.295 (7.5)
0.157 (4.0) 0.374 (9.5) 0.394 (10.0)
0.197 (5.0) 0.433 (11.0) 0.394 (10.0)
0.197 (5.0) 0.433 (11.0) 0.394 (10.0)
0.236 (6.0) 0.472 (12.0) 0.394 (10.0)
0.197 (5.0) 0.433 (11.0) 0.591 (15.0)
0.236 (6.0) 0.472 (12.0) 0.591 (15.0)
0.295 (7.5) 0.531 (13.5) 0.591 (15.0)
0.335 (8.5) 0.571 (14.5) 0.591 (15.0)
0.335 (8.5) 0.669 (17.0) 0.886 (22.5)
0.394 (10.0) 0.748 (19.0) 0.886 (22.5)
0.433 (11.0) 0.787 (20.0) 1.083 (27.5)
0.512 (13.0) 0.886 (22.5) 1.083 (27.5)
T Max
Ød
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
0.031 (0.8)
RoHS Compliant
ESR (mΩ)
IRMS (Amps)
20 kHz to
100 kHz 25 ºC 45 ºC 85 ºC
Not applicable
35
32
28
26
3.8
4
4.4
5.1
3.6
3.8
4.4
4.9
1.7
1.9
3.2
3.5
Not applicable.
These capacitance values
are not customarily used
in switched-mode power
supplies
32
30
5.7
5.7
5
5.5
2.2
2.4
Not applicable.
These capacitance values
are not customarily used
in switched-mode power
supplies
* indicates capacitance tolereance, J = ±5%, K = ±10%, M = ±20%
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 171
Radial Leaded Metallized Polypropylene
Notice and Disclaimer:
All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
