Notice for TAIYO YUDEN Products
[ For High Quality and/or Reliability Equipment
(Automotive / Industrial Equipment) ]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2017. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment), medical
equipment classified as Class I or II by IMDRF, industrial equipment, and automotive interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which
may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
medical equipment classified as Class III by IMDRF).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter
“TAIYO
YUDEN’official sales channel” Please note that the contents of this
s
).
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’official sales
s
channel.
■
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to
“U.S.
Export
Administration Regulations”
,
“Foreign
Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
1
8
MULTILAYER CHIP BEAD INDUCTORS FOR POWER LINES(BK SERIES P TYPE)
MULTILAYER CHIP BEAD INDUCTORS FOR POWER LINES (BK SERIES P TYPE)
■PART
NUMBER
*Operating Temp. :
-55½125℃（Including self-generated heat）
REFLOW
AEC-Q200
B
K P
①
1
0
②
0
5
H
③
S
1
2 1
④
－ T V
⑤ ⑥ ⑦
△＝Blank space
①Series name
Code
BKP
Series name
Multilayer chip bead inductor for power line
②Dimensions（L×W）
Code
1005
③Material
Code
HS
HM
TS
TM
Type（inch）
1005（0402）
Dimensions
（L×W）［mm½
1.0×0.5
④Nominal impedance
Code
（example）
100
330
121
221
⑤Characteristics
Code
－
⑥Packaging
Code
T
⑦Internal code
Code
V
Nominal impedance［Ω½
10
33
120
220
Material
Refer to impedance curves
for material differences
Characteristics
Standard
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
／
74
Packaging
Taping
Internal code
MLCI for Industrial and Automotive
■FEATURES
●HS：For
broadband noise suppression
●HM：For
upper 20MHz noise suppression
●TS：Low
DC resistance HS version.
●TM：Low
DC resistance HM version.
■STANDARD
EXTERNAL DIMENSIONS / STANDARD QUANTITY
Type
BKP1005
（0402）
L
1.0±0.05
（0.039±0.002）
W
0.5±0.05
（0.020±0.002）
T
0.5±0.05
（0.020±0.002）
e
0.25±0.1
（0.010±0.004）
Standard quantity [pcs]
Paper tape
Embossed tape
10000
－
Unit：mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
8
■PART
NUMBER
・ All the Multilayer Chip Bead Inductors of the catalog lineup are RoHS compliant.
Note)
・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
・ *1: Automotive（AEC-Q200 Qualified) products
＜ ：AEC-Q200 qualified＞
All the Multilayer Chip Bead Inductors of *1 marks are tested based on the test conditions and methods defined in AEC-Q200 by family item.
Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.
・ *2: Industrial products and Medical products
●BKP1005
Part number
BKP1005HS100-TV
BKP1005HS330-TV
BKP1005HS680-TV
BKP1005HS121-TV
BKP1005HS221-TV
BKP1005HM121-TV
BKP1005HM221-TV
BKP1005TS330-TV
BKP1005TS680-TV
BKP1005TS121-TV
BKP1005TM121-TV
Nominal impedance
［Ω½
10
33
68
120
220
120
220
33
68
120
120
Impedance tolerance
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
Measuring frequency
［MHz½
100
100
100
100
100
100
100
100
100
100
100
DC Resistance
［mΩ½（max.）
30
50
75
140
200
120
180
39±30％
55±30％
70±30％
100
Rated current
［A½（max.）
2.0
1.7
1.5
1.0
0.80
1.1
0.90
1.7
1.5
1.3
1.3
Thickness
［mm½
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
Note
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
NOISE SUPPRESSION COMPONENTS FERRITE BEAD INDUCTORS
※）The rated current is the value of current at which the temperature of the element is increased within 40℃.
／
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
8
75
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
