Specialty Terminals
71M-250-32-P, 72M-250-32-P, 73M-250-32-P
Male Disconnect, Vinyl Insulated, Butted Seam
L
W«
W´
Data Sheet
Product Number
Wire Range
(AWG)
L
Male Tab
Width (W')
x Thickness
Barrel
Length
Barrel
I.D.
Maximum
Insulation
Diameter
71M-250-32-P
72M-250-32-P
73M-250-32-P
22-18
16-14
12-10
0.93
0.93
1.05
0.250 x 0.032
0.250 x 0.032
0.250 x 0.032
0.25
0.25
0.25
0.065
0.085
0.150
0.145
0.170
0.250
Installation Information
WARNING
UNDERWRITERS
LABORATORIES
STANDARD NO. UL 310
3M FILE NO. E70512
CANADIAN STANDARDS
ASSOCIATION
STANDARD NO. C22.2
NO. 153
3M FILE NO. LR22190
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Specifications
Wire Size:
Barrel Seam:
Max. Voltage Rating:
Max. Temperature Rating:
Max. Current:
Insulator Material:
Terminal Material:
Plating:
See Table Above
Butted
600 V Building Wire
1000 V Signs or
Fixtures (Luminaires)
221˚F (105˚C)
Same as Wire
Vinyl
ETP Copper
Tin
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style) hand tools,
or TR-490 (ratchet style) hand tools.
Barrel Crimp (Required)
Suitable for factory application on steel or brass tabs UL
or CSA.
Suitable for field application on brass tabs, strain relief
required, UL only.
Engineering Specification
Crimp-Type Male Quick-Slide Connectors shall,
electrically and mechanically connect permanently to the
prestripped end of a stranded copper wire and, have a flat
rectangular tongue portion for mating to a Female
Disconnect in a separable, reusable manner, forming a
Quick Connect Wiring Connection.
The connector line shall offer tongue variations (size
0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA DC-2)
and barrel variations in wire size 22-18 AWG, 16-14
AWG, 12-10 AWG and construction of non-insulated,
vinyl insulated nylon fully insulated, etc.
The Quick-Slide Connectors shall have regulatory agency
coverage (UL Listing, CSA Certification). The tongue
shall be marked with the wire range and the
manufacturer’s symbol ( ).
The Vinyl Insulated 0.250˝ Male Disconnect with
Insulation Grip shall be tin plated 0.032˝ thick copper,
with a 0.250˝ blade conforming to ANSI/NEMA DC-2
dimension and a 0.25˝ long barrel with a molded vinyl
sleeve, color coded, and sized for a specified (AWG) wire
range (22-18, 16-14, 12-10).
Insulated connectors shall be UL Listed and CSA
Certified for 600 volts maximum, building wire: 1000
volts maximum, signs and fixtures (luminaires) The
connector shall be temperature rated 221˚F (105˚C)
maximum.
Quick Slide Connectors shall be suitable for field or
factory wiring, with a UL Recognized strain relief
required.
3M is a trademark of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture as of the date of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above, your exclusive remedy shall
be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M
will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential
regardless of the legal theory asserted.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2002 78-8126-0732-9-A
Microchip MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
