Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Z5U Dielectric, 50 – 100 VDC (Commercial Grade)
Overview
KEMET’s Z5U dielectric features an 85°C maximum
operating temperature and is considered “general-purpose.”
The Electronics Components, Assemblies & Materials
Association (EIA) characterizes Z5U dielectric as a Class
III material. Components of this classification are fixed,
ceramic dielectric capacitors suited for bypass and
decoupling or other applications in which dielectric losses,
high insulation resistance and capacitance stability are not
of major importance. Z5U exhibits a predictable change in
capacitance with respect to time and voltage and displays
wide variations in capacitance with reference to ambient
temperature. Capacitance change is limited to +22%, −56%
from +10°C to +85°C.
Benefits
•
•
•
•
•
•
•
•
+10°C to +85°C operating temperature range
Lead (Pb)-free, RoHS and REACH compliant
EIA 0805, 1206, 1210, 1812, 1825, and 2225 case sizes
DC voltage ratings of 50 and 100 V
Capacitance offerings ranging from 6,800 pF to 2.2 μF
Available capacitance tolerances of ±20% and +80%/-20%
Non-polar device, minimizing installation concerns
100% pure matte tin-plated termination finish allowing for
excellent solderability
Applications
Typical applications include limited temperature, decoupling
and bypass.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
C
Ceramic
1825
C
225
Capacitance
Code (pF)
Two significant
digits + number
of zeros
M
5
U
A
C
TU
Case Size
Specification/
(L" x W")
Series
0805
1206
1210
1812
1825
2225
C=
Standard
Failure Rate/
Capacitance Rated Voltage
Packaging/Grade
Dielectric
Termination Finish
1
(VDC)
(C-Spec)
Tolerance
Design
M = ±20%
Z = +80%/-20
5 = 50
1 = 100
U = Z5U
A = N/A
C = 100% Matte Sn
See
"Packaging
C-Spec
Ordering
Options Table"
below
1
Additional termination finish options may be available. Contact KEMET for details.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1004_Z5U_SMD • 11/29/2017
1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Z5U Dielectric, 50 – 100 VDC (Commercial Grade)
Packaging C-Spec Ordering Options Table
Packaging Type
1
Bulk Bag / Unmarked
7" Reel / Unmarked
13" Reel / Unmarked
7" Reel / Marked
13" Reel / Marked
1
Packaging/Grade
Ordering Code (C-Spec)
Not required (Blank)
TU
7210 (EIA 0805 and larger case sizes)
TM
7215 (EIA 0805 and larger case sizes)
Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging.
1
The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain capacitors
that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information see "Capacitor Marking".
Dimensions – Millimeters (Inches)
W
L
T
B
S
EIA Size
Code
0805
1206
1210
1812
1825
2225
Metric Size
Code
2012
3216
3225
4532
4564
5664
L
Length
2.00 (0.079)
±0.20 (0.008)
3.20 (0.126)
±0.20 (0.008)
3.20 (0.126)
±0.20 (0.008)
4.50 (0.177)
±0.30 (0.012)
4.50 (0.177)
±0.30 (0.012)
5.60 (0.220)
±0.40 (0.016)
W
Width
1.25 (0.049)
±0.20 (0.008)
1.60 (0.063)
±0.20 (0.008)
2.50 (0.098)
±0.20 (0.008)
3.20 (0.126)
±0.30 (0.012)
6.40 (0.252)
±0.40 (0.016)
6.40 (0.248)
±0.40 (0.016)
T
Thickness
B
Bandwidth
0.50 (0.02)
±0.25 (0.010)
0.50 (0.02)
±0.25 (0.010)
0.50 (0.02)
±0.25 (0.010)
0.60 (0.024)
±0.35 (0.014)
0.60 (0.024)
±0.35 (0.014)
0.60 (0.024)
±0.35 (0.014)
S
Separation
Minimum
0.75 (.030)
Mounting
Technique
Solder Wave or
Solder Reflow
See Table 2 for
Thickness
N/A
Solder Reflow
Only
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1004_Z5U_SMD • 11/29/2017
2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Z5U Dielectric, 50 – 100 VDC (Commercial Grade)
Qualification/Certification
Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are
referenced in Table 4, Performance & Reliability.
Environmental Compliance
Lead (Pb)-free, RoHS, and REACH compliant without exemptions.
Electrical Parameters/Characteristics
Item
Operating Temperature Range
Capacitance Change with Reference to
+25°C and 0 Vdc Applied (TCC)
1
Parameters/Characteristics
−10°C to +85°C
+22%, −56%
7.0%
250% of rated voltage
(5±1 seconds and charge/discharge not exceeding 50mA)
4.0%
100 megohm microfarads or 10GΩ
(Rated voltage applied for 120±5 seconds at 25°C)
Aging Rate (Maximum % Capacitance Loss/Decade Hour)
2
Dielectric Withstanding Voltage (DWV)
3
Dissipation Factor (DF) Maximum Limit at 25°C
4
Insulation Resistance (IR) Minimum Limit at 25°C
Regarding Aging Rate: Capacitance measurements (including tolerance) are indexed to a referee time of 48 or 1,000 hours. Please refer to a part
number specific datasheet for referee time details.
2
DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the
capacitor.
3
Capacitance and dissipation factor (DF) measured under the following conditions:
1kHz ± 50Hz and 1.0 ± 0.2 Vrms if capacitance ≤10µF
120Hz ± 10Hz and 0.5 ± 0.1 Vrms if capacitance >10µF
4
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON".
1
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Dielectric
Z5U
Rated DC
Voltage
> 25
25
Capacitance
Value
All
Dissipation Factor
(Maximum %)
5.0
7.5
Capacitance
Shift
±30%
Insulation
Resistance
10% of Initial
Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1004_Z5U_SMD • 11/29/2017
3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Z5U Dielectric, 50 – 100 VDC (Commercial Grade)
Table 1 – Capacitance Range/Selection Waterfall (0805 – 2225 Case Sizes)
Case Size/
Series
Voltage Code
Rated Voltage (VDC)
Capacitance Tolerance
6,800 pF
8,200 pF
10,000 pF
12,000 pF
15,000 pF
18,000 pF
22,000 pF
27,000 pF
33,000 pF
39,000 pF
47,000 pF
56,000 pF
68,000 pF
82,000 pF
0.10 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
0.27 µF
0.33 µF
0.39 µF
0.47 µF
0.56 µF
0.68 µF
0.82 µF
1.0 µF
1.2 µF
1.5 µF
1.8 µF
2.2 µF
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
DN
DN
DN
DN
DN
DN
DN
DN
DN
DN
DN
DP
DP
DP
DN
DN
DN
DN
C0805C
5
50
1
100
C1206C
5
50
1
100
C1210C
5
50
1
100
C1812C
5
50
1
100
C1825C
5
50
1
100
C2225C
5
50
1
100
Capacitance
Capacitance
Code
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EB
EB
EB
EB
EB
EB
EB
EC
EC
EB
EB
EB
EB
FB
FB
FB
FB
FB
FB
FC
FC
FC
FC
FD
FD
FD
FD
FD
FF
FH
FB
FB
FB
FC
FD
FD
FD
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GC
GC
GE
GE
GB
GB
GB
GB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HC
HD
HF
50
5
HB
HB
HB
HB
HB
KB
KB
KB
KB
KB
KB
KB
KB
KC
KD
KD
50
5
KC
KC
KC
Rated Voltage (VDC)
50
5
100
1
50
5
100
1
50
5
100
1
50
5
100
1
100
1
100
1
Capacitance
Capacitance Code
Voltage Code
Case Size/Series
C0805C
C1206C
C1210C
C1812C
C1825C
C2225C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1004_Z5U_SMD • 11/29/2017
4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Z5U Dielectric, 50 – 100 VDC (Commercial Grade)
Table 2A – Chip Thickness/Tape & Reel Packaging Quantities
Thickness
Code
DN
DP
EB
EC
FB
FC
FD
FF
FH
GB
GC
GE
HB
HC
HD
HF
KB
KC
KD
Thickness
Code
Case
Size
0805
0805
1206
1206
1210
1210
1210
1210
1210
1812
1812
1812
1825
1825
1825
1825
2225
2225
2225
Case
Size
Thickness ±
Range (mm)
0.78±0.10
0.90±0.10
0.78±0.10
0.90±0.10
0.78±0.10
0.90±0.10
0.95±0.10
1.10±0.10
1.55±0.15
1.00±0.10
1.10±0.10
1.30±0.10
1.10±0.15
1.15±0.15
1.30±0.15
1.50±0.15
1.00±0.15
1.10±0.15
1.30±0.15
Thickness ±
Range (mm)
Paper Quantity
7" Reel
4,000
4,000
4,000
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
7" Reel
Plastic Quantity
7" Reel
0
0
4,000
4,000
4,000
4,000
4,000
2,500
2,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
7" Reel
13" Reel
15,000
15,000
10,000
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
13" Reel
13" Reel
0
0
10,000
10,000
10,000
10,000
10,000
10,000
8,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
13" Reel
Paper Quantity
Plastic Quantity
Package quantity based on finished chip thickness specifications.
Table 2B – Bulk Packaging Quantities
Packaging Type
Packaging C-Spec
1
Loose Packaging
Bulk Bag (default)
N/A
2
Case Size
EIA (in)
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
1
Packaging Quantities (pieces/unit packaging)
Metric (mm)
1005
1608
2012
3216
3225
4520
4532
4564
5650
5664
Minimum
Maximum
50,000
1
20,000
The "Packaging C-Spec" is a 4 to 8 digit code which identifies the packaging type and/or product grade. When ordering, the proper code must be
included in the 15th through 22nd character positions of the ordering code. See "Ordering Information" section of this document for further details.
Commercial Grade product ordered without a packaging C-Spec will default to our standard "Bulk Bag" packaging. Contact KEMET if you require a bulk
bag packaging option for Automotive Grade products.
2
A packaging C-Spec (see note 1 above) is not required for "Bulk Bag" packaging (excluding Anti-Static Bulk Bag and Automotive Grade products). The
15th through 22nd character positions of the ordering code should be left blank. All product ordered without a packaging C-Spec will default to our
standard "Bulk Bag" packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1004_Z5U_SMD • 11/29/2017
5
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
