F-203 SUPPLEMENT
HCMD–07–S–03–02–T
.100" IDC CABLE STRIPS
Mates with:
TSW, MTSW, TST, EW,
BST, LCW, ZST, MTLW,
TSM
Features:
•
•
•
•
•
•
•
•
Low Profile
Skinny side locks
Dual beam contacts
Single & double row
High temp insulator
Odd lead counts
Customs our specialty
Easy assembly
Specifications:
HCSD, HCSS
Insulator Material:
Black Liquid Crystal Polymer
Flammability Rating:
UL 94V-O
Insulation Resistance:
5000 MΩ
Temperature Range:
-65°C to +80°C
Withstanding Voltage:
1000 VRMS @ 60 Hz
Contact:
Phosphor Bronze
Plating:
10µ" (0,25µm) on contact
area, 150µ" (3,81µm)
Sn on balance over
50µ" (1,27µm) Ni.
Current Rating:
1A
Contact Resistance:
10 mΩ max
Lead Size Range:
.024" (0,61mm) SQ to
.026" (0,66mm) SQ
Lead Insertion Depth:
.185" (4,70mm) to .250"
(6,35mm)
Insertion Force:
6 oz avg (1,67N) average with
.025" (0,64mm) SQ probe
Withdrawal Force:
3 oz avg (0,83N) average with
.025" (0,64mm) SQ probe
Wire:
28 AWG 7/36 stranded
Tinned Copper
Specifications:
HCMD, HCMS
Insulator Material:
Black Liquid Crystal Polymer
Flammability Rating:
UL 94V-O
Insulation Resistance:
5000 MΩ
Temperature Range:
-65°C to +80°C
Withstanding Voltage:
1000 VRMS @ 60 Hz
Terminal: Phosphor Bronze
Plating:
Sn over 50µ" (1,27µm) Ni
Current Rating:
1A
Wire:
28 AWG 7/36 stranded
Tinned Copper
Note:
IDC assemblies are
non-standard, non-returnable.
;;
;
;;
TYPE
STRIP
ROW OPTION
NO. PINS
PER ROW
HCMD, HCMS
HCSD, HCSS
END
ASSEMBLY
S
= Single
= Double
(Color coded cable
N/A for 31 thru 36
pins/row. See
–G option.)
D
–05, – 07, – 08, –10,
–12, –13, –15,
–17, –20, –25, –30,
–32, –36
(Call Samtec other sizes)
HCM
= Male Strip
–S
= Single End
No. of Positions x .100 (2,54)
+ .180 (4,57)
(3,30)
.130
(5,08)
.200
(7,87)
.310
REF
Socket or Male Plug on one end
(0,51)
.020
(3,05)
.120
–D
= Double End
(0,64)
.025
SQ
TYP
(2,54)
.100
Single
(HCMS)
Double
(HCMD)
(2,54)
.100
Also Available (5,84mm) .230" tail length
specify Lead Style –02 instead of –01
HCS
= Socket Strip
(3,30)
.130
No. of Positions x .100 (2,54)
+ .180 (4,57)
(5,08)
.200
Socket or Male Plug on each end
–T
= Transfer End
(9,53)
.375
REF
(2,54)
.100
(0,76)
.030
SQ. TYP.
Single
(HCSS)
(2,54)
.100
Double
(HCSD)
Male Plug on one end with socket on
other.
Begin part number with HCM.
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
SAMTEC USA
• Tel: 1-800-SAMTEC-9 or 812-944-6733 • Fax: 812-948-5047
SAMTEC UK
• Tel: 01236 739292 • Fax: 01236 727113
SAMTEC GERMANY
• Tel: +49 (0) 89 / 89460-0 • Fax: +49 (0) 89 / 89460-299
SAMTEC FRANCE
• Tel: 01 60 95 06 60 • Fax: 01 60 95 06 61
SAMTEC ITALY
• Tel: 39 039 6890337 • Fax: 39 039 6890315
SAMTEC ASIA PACIFIC
• Tel: 65 6745-5955 • Fax: 65 6841-1502
SAMTEC CHINA
• Tel: 86-21-5385-4089 • Fax: 86-21-5385-4047
SAMTEC JAPAN
• Tel: 81-424-42-8318 • Fax: 81-424-42-8319
SAMTEC TAIWAN
• Tel: 886-02-2364-6077 • Fax: 886-02-2367-9531
SAMTEC HONG KONG
• Tel: 852-26904858 • Fax: 852-26904842
SAMTEC ANZ •
Tel: 613 9512 7747 • Fax: 613 9512 7745
F-203 SUPPLEMENT
HCSD–12–S–03–01–T
.100" IDC CABLE STRIPS
ASSEMBLED
LENGTH
HCMD, HCMS
HCSD, HCSS
OTHER
OPTIONS
01
PLATING
OPTION
NOTCH
POLARIZATION
–“XX”
= Assembled Length
–N
–S
–T
10
µ
" (0,25
µ
m)
Gold on contact area or tail,
= Tin on balance
(Standard on HCSS & HCSD.
Leave blank)
= Notch Polarization
(1,27)
.050
02
Assembled Length in
INCHES (±1/8")
2 inches minimum
01
(3,81) .150
Tin
= (Standard on HCMS & HCMD.
Leave blank)
Required for HCSS and HCSD.
(Not available on HCMS or HCMD, unless
Transfer, then only the socket is polarized.)
– P “XX”
= Position Polarization
– ST “X”
= Stripped & Tinned
Specify Suffix from table. All
dimensions are
±
1
/
16
"
(1,59mm)
. Not
available in 28 positions and higher.
–S “XX”
= Daisy Chain Single
–R
= Reversed
(50,80)
2.00
min.
“XX”
±
1
/
8
" (3,18)
Single Row
Connectors
02
04
01
03
02
04
01
03
Outer Most
(End of
Assembly)
Single
Double
–ST8
–ST4
–ST2
–ST3
1
/
8
"
1
/ "
4
1
/ "
2
3
/ "
8
(3,18)
(6,35)
(12,70)
(9,53)
(101,60)
4.00 minimum
When mating double row connector
with two single row connectors, the
outer most single will be connected
to Conductor #1 and the inside single
to Conductor #2.
6
3
7
–M
= Middle Reversed
Specify “XX” as position. For
Double the same position will be
polarized on both ends. (Not
available on HCM, unless Transfer,
then only the socket is polarized)
– D “XX”
= Daisy Chain, Double
(50,80)
2.00
min.
– B “XX”
= Breakout
Specify “XX” as number of
conducts to be broken out.
“XX”
±
1
/
8
" (3,18)
Double Row
Strips
Requires –SXX, –WXX or –DXX
7
1
“XX”
Outer Most
(End of
Assembly)
–G
= Gray Cable
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
(127,00)
5.00 max.
(50,80)
2.00 min.
(101,60)
4.00 minimum
= Outside Reversed
6
–O
4
–W “XX”
= Wiring Reversed
Daisy Chain, Single
Same as –S “XX” except outer strip
connected to conductor #2 and inside
strip connected to conductor #1.
Requires –SXX, –WXX or –DXX
7
Standard cable is color coded. Specify
–G for Gray cable with one red edge.
2
–RW
= Reversed Wiring
#1 wire opposite position #1
5
6
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
SAMTEC USA
• Tel: 1-800-SAMTEC-9 or 812-944-6733 • Fax: 812-948-5047
SAMTEC UK
• Tel: 01236 739292 • Fax: 01236 727113
SAMTEC GERMANY
• Tel: +49 (0) 89 / 89460-0 • Fax: +49 (0) 89 / 89460-299
SAMTEC FRANCE
• Tel: 01 60 95 06 60 • Fax: 01 60 95 06 61
SAMTEC ITALY
• Tel: 39 039 6890337 • Fax: 39 039 6890315
SAMTEC ASIA PACIFIC
• Tel: 65 6745-5955 • Fax: 65 6841-1502
SAMTEC CHINA
• Tel: 86-21-5385-4089 • Fax: 86-21-5385-4047
SAMTEC JAPAN
• Tel: 81-424-42-8318 • Fax: 81-424-42-8319
SAMTEC TAIWAN
• Tel: 886-02-2364-6077 • Fax: 886-02-2367-9531
SAMTEC HONG KONG
• Tel: 852-26904858 • Fax: 852-26904842
SAMTEC ANZ •
Tel: 613 9512 7747 • Fax: 613 9512 7745
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
