Product Specifications
400PQMR-CR
QMA Male Right Angle for CNT400 braided cable
CHARACTERISTICS
General Specifications
Interface
Body Style
Brand
QMA Male
Right angle
Cinta™
Electrical Specifications
Operating Frequency Band
Cable Impedance
Connector Impedance
RF Operating Voltage, maximum (vrms)
dc Test Voltage
Outer Contact Resistance
Inner Contact Resistance
Insulation Resistance, minimum
Average Power
Peak Power, maximum
Insertion Loss, typical
0 – 6000 MHz
50 ohm
50 ohm
500.00 V
1000 V
2.50 mOhm
3.00 mOhm
5000 MOhm
580.0 W @ 900 MHz
5.00 kW
0.05 dB
©2009 CommScope, Inc. All rights reserved.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.
All specifications are subject to change. See www.commscope.com for the most current information.
page 1 of 3
3/4/2009
Product Specifications
400PQMR-CR
Outline Drawing
Mechanical Specifications
Outer Contact Plating
Inner Contact Plating
Outer Contact Attachment Method
Inner Contact Attachment Method
Interface Durability
Connector Retention Tensile Force
Connector Retention Torque
Insertion Force
Insertion Force Method
Pressurizable
Trimetal
Gold
Crimp
Solder
100 cycles
330 N | 74 lbf
0.75 Nm | 0.56 Nm
22.00 N | 4.95 lbf
IEC 16915:9.3.5
No
Dimensions
Nominal Size
Diameter, maximum
Length
Weight
Width
0.405 in
15.00 mm | 0.59 in
33.50 mm | 1.32 in
39.14 g | 0.09 lb
29.01 mm | 1.14 in
Environmental Specifications
©2009 CommScope, Inc. All rights reserved.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.
All specifications are subject to change. See www.commscope.com for the most current information.
page 2 of 3
3/4/2009
Product Specifications
400PQMR-CR
Operating Temperature
Storage Temperature
Water Jetting Test Mating
Water Jetting Test Method
Mechanical Shock Test Method
Climatic Sequence Test Method
Damp Heat Steady State Test Method
Thermal Shock Test Method
Vibration Test Method
Corrosion Test Method
40 °C to +85 °C ( 40 °F to +185 °F)
65 °C to +125 °C (85 °F to +257 °F)
Mated
IEC 60529:2001, IP65
IEC 60068227
IEC 600681
IEC 6006823
IEC 60068214
IEC 6006826
IEC 60068211
Standard Conditions
Attenuation, Ambient Temperature
Average Power, Ambient Temperature
20 °C | 68 °F
40 °C | 104 °F
Average Power, Inner Conductor Temperature 100 °C | 212 °F
Return Loss
Frequency Band
0–3000 MHz
3000–6000 MHz
VSWR
1.05
1.07
Return Loss (dB)
32.60
29.54
Regulatory Compliance/Certifications
Agency
RoHS 2002/95/EC
China RoHS SJ/T 113642006
Classification
Compliant by Exemption
Above Maximum Concentration Value (MCV)
*
F o o t n o t e s
Insertion Loss, typical
0.05√¯freq (GHz) (not applicable for elliptical waveguide)
©2009 CommScope, Inc. All rights reserved.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.
All specifications are subject to change. See www.commscope.com for the most current information.
page 3 of 3
3/4/2009
模拟电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
