FL02M652-00 - Rev. J - Page 1 of 3
Product Family:
Part Number Series:
Bessel Absorptive Filter—9th Order
FL9 Series
Construction:
High Purity Alumina Substrate
Nickel alloy thin-film resistive element
Epoxy-resin overcoat
Available in RoHS (Sn95.5/Ag3.8/Cu0.7)
or Non-RoHS (Sn63/Pb37)
Features:
Cutoff frequencies between 2.5GHz and
4.0 GHz
Low pass
Absorptive
Ball Grid Array (BGA) for high bandwidth
Competitive pricing
Description:
Thin Film Technology's FL9 series of surface mount low pass filters are designed for use in Duo-Binary modulation
schemes where flat group delay and return loss beyond the cutoff frequency are important characteristics. The discrete
(0.25Ghz) cutoff series of 1/4 bitrates are intended for use in varying bitrates and application requirements including OC-
192(10Gb/s) and forward error correction beyond 12Gb/s.
This product is currently available with solder finishes of Sn63/Pb37, as well as a RoHS compliant / Lead Free solder
finish of Sn95.5/Ag3.8/Cu0.7. For the RoHS compliant / Lead Free part, the customer must specify this upon ordering
by following the instructions in the part numbering section of this specification.
Product Dimensions:
Part Numbering:
Ex. FL9B5BH033-T*-C
Product
Designator
Orders
Type
Impedance
Function
Footprint
Cutoff Freq.
Custom
Code
S
(Standard)
TBD
(Custom)
T&R Qty *
RoHS
FL
9
(9th Order)
B
(Absorptive)
5
(50 ohm)
B
(Bessel)
025 = 2.5 GHz
028 = 2.75 GHz
030 = 3.0 GHz
H
033 = 3.25 GHz
(6 ball BGA)
035 = 3.5 GHz
038 = 3.75 GHz
040 = 4.0 GHz
-T1 = 100
-T5 = 500
-C (RoHS)
Leave blank
for non-RoHS
*Note: T&R package quantity (-T#) will be added to the part number by us depending on the quantity ordered.
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 / www.thin-film.com
FL02M652-00 - Rev. J - Page 2 of 3
Electrical Specifications:
Parameter
English Size
Metric Size
Type
Function
Order
Reference Impedance
Fo Cutoff Freq (-3dB)
Fo Cutoff Tolerance
Return Loss
(S11)
(S22)
Rejection
Group Delay Ripple (max)
Rated Current
Isolation Resistance
Operating Temperature
Packaging
Please consult the factory for any desired variations to the above specifications
Specification
2520
6450
Absorptive Low Pass
Bessel
9th
50 ohms
2.5 to 4.0GHz in 0.25 GHz steps
Fo ±0.25 GHz
<15dB Loss through Fo
<10dB Loss through two times Fo
<13dB Loss through Fo
-10dB through three times Fo
20ps Max through 1.6x Fo
100mA
>100Mohm @ 50Vdc
-40°C ~ +85°C
100 or 500 pcs/reel
Frequency Performance Plots –3.25 GHz typical:
S2,1 (Blue) / S1,1 (Black)
S1,2 (Blue) / S2,2 (Black)
Phase Response (Blue) / Group Delay (Black)
These products are available mounted into a Coaxial
Measurement Module (CMM) for bench evaluation
purposes. Please call the factory.
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 / www.thin-film.com
FL02M652-00 - Rev. J - Page 3 of 3
Marking and Recommended Land Pattern:
Marking:
Pin 1
Corner of pin A1
TFT “don’t stop” logo
Row 1
C = Monthly date code
9 = Filter orders (9th)
Row 2
Row 3
Fo Freq (040=4.0 GHz)
(roundup as necessary so
033=3.25 GHz, etc.)
Underline indicates
absorptive type filter
Recommended Land Pattern:
Please call the factory for DXF output of Land Pattern
Tape and Reel Packaging:
Packaging Specifications
Packaging Requirements
General Guidelines & Recommendations
All taping done in accordance with EIA 481 standards.
Pieces taped with the marking up and showing through the cover tape (as shown in
the drawing below).
All orders under 100 pcs will be put on cut tape only with no leader or trailer.
Labels will contain the TFT part number and quantity of pieces taped.
Labeling Requirements
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 / www.thin-film.com
电源技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
