TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
SURFACE MOUNT 30,000 W
Transient Voltage Suppressor
- High Reliability controlled devices
- Unidirectional (A) and Bidirectional (CA) construction
- Selections for 14 to 400 V standoff voltages (V
WM
)
- Fast response
LEVELS
M, MA, MX, MXL
DEVICES
MPLAD30KP14A thru MPLAD30KP400CA, e3
FEATURES
High reliability controlled devices with fabrication and assembly lot traceability
100 % surge tested devices
Low profile surface mount
Optional upscreening available by replacing the M prefix with MA, MX or MXL. These prefixes
specify various screening and conformance inspection options based on MIL-PRF-19500.
Refer to
MicroNote 129
for more details on the screening options.
Suppresses transients up to 30 kW @ 10/1000 µs and 200 kW @ 8/20 µs (see Figure 1)
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant devices available by adding an “e3” suffix
3σ lot norm screening performed on Standby Current I
D
APPLICATIONS / BENEFITS
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4
Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance:
o
Class 1,2,3,4,5: MPLAD30KP14A to 400CA
o
Class 5: MPLAD30KP14A to 400CA (short distance)
o
Class 5: MPLAD30KP14A to 220CA (long distance)
Secondary lightning protection per IEC 61000-4-5 with 12 Ohms source impedance:
o
Class 1,2,3: MPLAD30KP14A to 400CA
o
Class 4: MPLAD30KP14A to 220CA
Secondary lightning protection per IEC 61000-4-5 with 2 Ohms source impedance:
o
Class 2: MPLAD30KP10A to 400CA
o
Class 3: MPLAD30KP14A to 220CA
o
Class 4: MPLAD30KP14A to 110CA
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25 °C: 30,000 watts at 10/1000 μs (also see Figures 1 and 2)
with impulse repetition rate (duty factor) of 0.05 % or less
t
clamping
(0 volts to V
BR
min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65 ºC to +150 ºC
Thermal resistance: 0.5 ºC/W junction to case or 50ºC/W junction to ambient when mounted
on FR4 PC board with recommended mounting pad (see page 2)
Steady-State Power dissipation: 250 watts at T
C
= 25 °C or 2.5 watts at T
A
= 25 °C when
mounted on FR4 PC board as described for thermal resistance
Forward Surge Voltage: 1500 Amps (theoretical) at 8.3mS half-sine wave (unidirectional
devices only)
Solder temperatures: 260 ºC for 10 s (maximum)
RF01005 Rev D, November 2010
High Reliability Product Group
Page 1 of 4
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0.
TERMINALS: Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100% Sn) Compliant annealed matte-Tin plating readily
solderable per MIL-STD-750, method 2026.
MARKING: Body marked with part number
POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom)
Available in bulk or custom tape-and-reel packaging
TAPE-AND-REEL: Standard per EIA-481-B (add “TR” suffix to part number)
WEIGHT: 1.7-2.0 grams (approximately)
PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm]
SYMBOLS & DEFINITIONS
Symbol
V
WM
P
PP
V
BR
I
D
Definition
Working Peak (Standoff) Voltage
Peak Pulse Power
Breakdown Voltage
Standby Current
Symbol
I
PP
V
C
Definition
Peak Pulse Current
Clamping Voltage
Breakdown Current for V
BR
I
BR
RF01005 Rev D, November 2010
High Reliability Product Group
Page 2 of 4
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
ELECTRICAL CHARACTERISTICS @ 25
o
C
REVERSE
STAND-OFF
VOLTAGE
V
WM
BREAKDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
MAXIMUM
PEAK
PULSE
CURRENT
I
PP
(FIG. 3)
MAXIMUM
TEMPERATUR
E
COEFFICIENT
OF V
BR
MICROSEMI
PART NUMBER
(Note 2)
MPLAD30KP14A
MPLAD30KP15A
MPLAD30KP16A
MPLAD30KP17A
MPLAD30KP18A
MPLAD30KP20A
MPLAD30KP22A
MPLAD30KP24A
MPLAD30KP26A
MPLAD30KP28A
MPLAD30KP30A
MPLAD30KP33A
MPLAD30KP36A
MPLAD30KP40A
MPLAD30KP43A
MPLAD30KP45A
MPLAD30KP48A
MPLAD30KP51A
MPLAD30KP54A
MPLAD30KP58A
MPLAD30KP60A
MPLAD30KP64A
MPLAD30KP70A
MPLAD30KP75A
MPLAD30KP78A
MPLAD30KP85A
MPLAD30KP90A
MPLAD30KP100A
MPLAD30KP110A
MPLAD30KP120A
MPLAD30KP130A
MPLAD30KP150A
MPLAD30KP160A
MPLAD30KP170A
MPLAD30KP180A
MPLAD30KP200A
MPLAD30KP220A
MPLAD30KP260A
MPLAD30KP280A
MPLAD30KP300A
MPLAD30KP350A
MPLAD30KP400A
MPLAD30KP14CA
MPLAD30KP15CA
MPLAD30KP16CA
MPLAD30KP17CA
MPLAD30KP18CA
MPLAD30KP20CA
MPLAD30KP22CA
MPLAD30KP24CA
MPLAD30KP26CA
MPLAD30KP28CA
MPLAD30KP30CA
MPLAD30KP33CA
MPLAD30KP36CA
MPLAD30KP40CA
MPLAD30KP43CA
MPLAD30KP45CA
MPLAD30KP48CA
MPLAD30KP51CA
MPLAD30KP54CA
MPLAD30KP58CA
MPLAD30KP60CA
MPLAD30KP64CA
MPLAD30KP70CA
MPLAD30KP75CA
MPLAD30KP78CA
MPLAD30KP85CA
MPLAD30KP90CA
MPLAD30KP100CA
MPLAD30KP110CA
MPLAD30KP120CA
MPLAD30KP130CA
MPLAD30KP150CA
MPLAD30KP160CA
MPLAD30KP170CA
MPLAD30KP180CA
MPLAD30KP200CA
MPLAD30KP220CA
MPLAD30KP260CA
MPLAD30KP280CA
MPLAD30KP300CA
MPLAD30KP350CA
MPLAD30KP400CA
V
C
@ I
PP
MAXIMUM
STANDBY
CURRENT
(Note 1)
V
BR
@ I
BR
VOLTS
15.6 – 17.2
16.7 – 18.5
17.8 – 19.7
18.9 – 20.9
20.0 – 22.1
22.2 – 24.5
24.4 – 26.9
26.7 – 29.5
28.9 – 31.9
31.1 – 34.4
33.3 – 36.8
36.7 – 40.6
40.0 – 44.2
44.4 – 49.1
47.8 – 52.8
50.0 – 55.3
53.3 – 58.9
56.7 – 62.7
60.0 – 66.3
64.4 – 71.2
66.7 – 73.7
71.1 – 78.6
77.8 – 86.0
83.3 – 92.1
86.7 – 95.8
94.4 - 104.0
100 – 111
111 – 123
122 – 135
133 – 147
144 – 159
167 – 185
178 – 197
189 – 209
200 – 221
222 – 245
245 – 271
289 – 320
311 – 345
333 – 369
389 – 431
444 - 492
I
D
@ V
WM
(α
V(BR)
)
mA
150
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
VOLTS
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
220
260
280
300
350
400
VOLTS
24.0
25.8
27.2
28.8
30.8
34.0
36.4
39.8
43.0
46.4
48.8
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113
121
126
137
146
162
177
193
209
243
259
275
291
322
356
419
451
483
564
644
A
3000
750
450
150
60
45
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
A
1251
1164
1101
1041
975
882
822
753
696
645
618
564
516
468
432
414
390
366
342
318
312
294
264
246
240
216
204
186
168
156
142
124
116
110
104
94
84
71
66
62
53
46
mV/ ºC
10
12
12
14
16
18
20
22
24
26
30
35
38
44
50
51
54
58
64
70
72
75
84
90
95
104
109
122
132
145
157
183
195
207
219
243
269
318
344
368
430
490
NOTE 1:
Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” V
WM
, which should be equal to or
greater than the dc or continuous peak operating voltage level
NOTE 2:
For bidirectional construction, indicate a CA suffix after the part number
NOTE 3:
Items listed in
Bold
above are available ex-stock or with a short lead-time
RF01005 Rev D, November 2010
High Reliability Product Group
Page 3 of 4
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
GRAPHS
P
PP
Peak Pulse Power - kW
tp – Pulse Time – sec
FIGURE 1
Peak Pulse Power vs. Pulse Time
Peak Pulse Power (P
PP
) or
continuous Power in Percent of
25°C Rating
Test waveform parameters: tr = 10
s,
tp = 1000
s
FIGURE 2 :
Pulse Waveform
T
L
Lead Temperature °C
FIGURE 3:
Derating Curve
RF01005 Rev D, November 2010
High Reliability Product Group
Page 4 of 4
工作这点儿事
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
