T-1
3
/
4
(5 mm) High Intensity
LED Lamps
Technical Data
HLMP-331x Series
HLMP-341x Series
HLMP-351x Series
Features
• High Intensity
• Choice of 3 Bright Colors
High Efficiency Red
Yellow
High Performance Green
• Popular T-1
3
/
4
Diameter
Package
• Selected Minimum
Intensities
• Narrow Viewing Angle
• General Purpose Leads
• Reliable and Rugged
• Available on Tape and Reel
Description
This family of T-1
3
/
4
nondiffused
LED lamps is specially designed
for applications requiring higher
on-axis intensity than is
achievable with a standard lamp.
The light generated is focused to
a narrow beam to achieve this
effect.
Selection Guide
Luminous Intensity
Iv (mcd) @ 10 mA
Color
Red
Part Number
HLMP-3315
HLMP-3317
HLMP-3316-I00xx
HLMP-3316-IJ0xx
HLMP-3415
Yellow
HLMP-3416
HLMP-3416-G00xx
HLMP-3416-IJ0xx
HLMP-3517
Green
HLMP-3519
HLMP-3519-F00xx
HLMP-3519-IJ0xx
Min.
13.8
22.00
22.0
22.0
9.2
14.7
14.7
37.6
6.7
10.6
10.6
43.6
Max.
-
-
-
70.4
-
-
-
120.2
-
-
-
139.6
2
Package Dimensions
Part Numbering System
HLMP - 3 x 1 x - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
B1: Right Angle Housing, Uneven Leads
B2: Right Angle Housing, Even Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Brightness Level
5, 7: Less Brightness
6, 9: Higher Brightness
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
3
Electrical Characteristics at T
A
= 25
°
C
Symbol
I
V
Description
Luminous Intensity
Device
HLMP-
3315
3316
3415
3416
3517
3519
2θ
1
/
2
Including Angle
Between Half
Luminous Intensity
Points
3315
3316
3415
3416
3517
3519
λ
PEAK
Peak Wavelength
331X
341X
351X
331X
341X
351X
331X
341X
351X
331X
341X
351X
331X
341X
351X
331X
341X
351X
331X
341X
351X
All
331X
341X
351X
5.0
145
500
595
Min.
13.8
22
9.2
14.7
6.7
10.6
Typ.
40.0
60.0
40.0
50.0
50.0
70.0
35
35
35
35
24
24
635
583
565
40
36
28
626
585
569
90
90
500
11
15
18
260
Max.
Units
mcd
mcd
mcd
Deg.
Test Conditions
I
F
= 10 mA (Figure 3)
I
F
= 10 mA (Figure 8)
I
F
= 10 mA (Figure 13)
I
F
= 10 mA
See Note 1 (Figure 6)
I
F
= 10 mA
See Note 1 (Figure 11)
I
F
= 10 mA
See Note 1 (Figure 16)
Measurement at Peak
(Figure 1)
Deg.
Deg.
nm
∆λ
1/2
Spectral Line Halfwidth
nm
λ
d
Dominant Wavelength
nm
See Note 2 (Figure 1)
τ
s
Speed of Response
ns
C
Capacitance
pF
V
F
= 0; f = 1 MHz
R
θ
J-PIN
Thermal Resistance
°C/W
Junction to Cathode
Lead
I
F
= 10 mA (Figure 2)
I
F
= 10 mA (Figure 7)
I
F
= 10 mA (Figure 12)
I
R
= 100
µA
See Note 3
V
F
Forward Voltage
1.9
2.0
2.1
2.4
2.4
2.7
V
V
R
η
V
Reverse Breakdown Volt.
Luminous Efficacy
V
lumens
Watt
Notes:
1.
θ
1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength,
λ
d
, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, I
e
, in watts/steradian, may be found from the equation I
e
= I
v
/η
v
, where I
v
is the luminous intensity in candelas and
η
v
is the luminous efficacy in lumens/watt.
4
Absolute Maximum Ratings at T
A
= 25
°
C
Parameter
Peak Forward Current
Average Forward Current
[1]
DC Current
[2]
Power Dissipation
[3]
Reverse Voltage (I
R
= 100
µA)
Transient Forward Current
[4]
(10
µsec
Pulse)
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
331X Series
90
25
30
135
5
500
110
-55 to +100
341X Series
60
20
20
85
5
500
110
-55 to +100
351X Series
90
25
30
135
5
500
110
-20 to +100
-55 to +100
260°C for 5 seconds
Units
mA
mA
mA
mW
V
mA
°C
°C
Notes:
1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at
1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
Figure 1. Relative Intensity vs. Wavelength.
5
High Efficiency Red HLMP-331X Series
Figure 2. Forward Current vs.
Forward Voltage Characteristics.
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
Figure 4. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak LED Current.
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration (I
DC
MAX
as per MAX Ratings).
Figure 6. Relative Luminous Intensity vs. Angular Displacement.
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
